Jensen MS4200RS User Manual
Jensen MS4200RS - Navigation System With CD Player Manual
 |
View all Jensen MS4200RS manuals
Add to My Manuals
Save this manual to your list of manuals |
Jensen MS4200RS manual content summary:
- Jensen MS4200RS | User Manual - Page 1
MS4200RS User Manual & Installation Instructions Audiovox Electronics Corporation 150 Marcus Boulevard, Hauppauge, NY 11788 www.Jensen.com 1-800-323-4815 © 2004 Audiovox - Jensen MS4200RS | User Manual - Page 2
OF CONTENTS SAFETY AND WARNINGS 1 INSTALLATION INSTRUCTIONS 3 GENERAL INFORMATION 9 Route & Sound - Navigating and listening to an audio CD 9 How does the navigation system work 9 The digital road map 10 SAFETY 11 Removable operating panel 11 Security code 11 Anti-theft protection LED 11 - Jensen MS4200RS | User Manual - Page 3
Information during guidance 47 Alternative route 49 Address manager 50 Emergency menu 52 System settings 53 Loading software updates 56 TROUBLESHOOTING 57 Troubleshooting 57 WARRANTY 59 SPECIFICATIONS 60 Attention! Only use this system when it is safe to do so. It is more important to keep - Jensen MS4200RS | User Manual - Page 4
information into the system yourself only when the vehicle is stopped. A The directions provided by the Navigation Radio are suggestions only always take precedence over the instructions issued by the Navigation Radio if they should contradict one another. A Only use the Navigation Radio when it is - Jensen MS4200RS | User Manual - Page 5
and legal manner before attempting to access the system. A Make certain that the volume level of the Navigation Radio is set to a level which still allows you to hear outside traffic and emergency services. A The guiding advice provided by the Navigation Radio are suggestions only. The driver is - Jensen MS4200RS | User Manual - Page 6
supporting or safety-relevant body parts. A Only install in vehicles with 12V negative ground systems problem-free installation. Connection in vehicles without standard ISO connectors If no adapter cables are available for your vehicle, connect the navigation safety instructions (alarm system, airbag - Jensen MS4200RS | User Manual - Page 7
INSTALLATION INSTRUCTIONS Connection overview, ISO connector A, Fig. 2: Pin Wire color Connection A1 Orange Input speedometer signal / SDVC A2 Green Switch input reversing signal (reversing light plus) A3 - Jensen MS4200RS | User Manual - Page 8
INSTALLATION INSTRUCTIONS Connection overview ISO connector B (loudspeakers), Fig. 3: Pin Wire color B1 Blue B2 Blue/black B3 Grey B4 Grey/black B5 ➽ Page 30. s Blue connector C3 (CD changer): You can connect an optional CD changer to the unit. For further information call technical support. 5 - Jensen MS4200RS | User Manual - Page 9
INSTRUCTIONS Installing the GPS antenna, Fig. 7 The GPS during installation. Install installation bracket, Fig. 8 - 10 The navigation radio can be installed into a vehicle's DIN radio slot is a prerequisite for correct functioning of the system Insert the installation bracket into the DIN slot and - Jensen MS4200RS | User Manual - Page 10
CD in the radio. To register the system and activate map, travel and/or traffic info, see the operating instructions, Section "C-IQ", ➽ page 32. 5. Park the vehicle outdoors to ensure unimpeded GPS reception. 6. Switch on the ignition and the radio. 7. Push the NAVIGATION button and confirm the user - Jensen MS4200RS | User Manual - Page 11
checked in the emergency menu (see operating instructions, page 52). Technical Support Technical support is available to handle queries about Jensen navigation systems. Up-to-date telephone numbers can be found in the Warranty section of this manual. * Specifications subject to change without notice - Jensen MS4200RS | User Manual - Page 12
then insert an audio CD and the system will still guide you to your intended destination. The navigation computer saves the road system in a defined area on the navigation CD. Important notes on the function of your navigation radio In principle, the system is functional with poor GPS reception, - Jensen MS4200RS | User Manual - Page 13
or prohibited entry into a pedestrian zone may be missing. The navigation system will display a warning if you drive into such an area. Local traffic laws always take precedence over navigation system instructions. Always observe the road signs and motor vehicle traffic regulations. Topicality - Jensen MS4200RS | User Manual - Page 14
The system has the following safety functions to prevent theft: SAFETY Removable operating that you clean the contacts occasionally with a cotton swab. Security code The navigation radio can be protected against theft with a security code. The unit is disabled as soon as it is disconnected from - Jensen MS4200RS | User Manual - Page 15
and items of news, ➽ page 19 Notes on audio CDs You can play 12 cm audio CDs on your CD player. The use of 8 cm CDs (with or without adapter) and of CDs with irregular shapes is not recommended. Notes on map CDs The navigation system is based on a C-IQ database, which is stored - Jensen MS4200RS | User Manual - Page 16
telephone connected: Switch to telephone input Without mobile telephone connected: Muting the system. 5 BAND Opens the menu "BAND SELECTION" (in radio mode). In CD player mode: Opens the "CD" menu. 9 Display 0 NAVIGATION . Opens the navigation menu. ➽ page 35. q DEST/P.O.I. . . . Press once: - Jensen MS4200RS | User Manual - Page 17
icon flashes: route is being planned. Do not remove map CD! Number of selected CD Selected search mode or display for random playback mode In navigation mode: The menus and displays for - Jensen MS4200RS | User Manual - Page 18
2. Insert the CD into the drive (printed side up). For audio CDs, playback starts automatically. 3. Close the front panel. Removing a is no telephone connected to the unit). Notes: The current navigation message can be played while the system is set to mute by pressing the { button. Traffic - Jensen MS4200RS | User Manual - Page 19
OPERATION Menu operation Cursor The currently selected line or field on the screen is designated as the cursor. The cursor is identified by an inverse field (bright letters on black background). Move the cursor using the cursor buttons 8, 2, 4 or 6. Confirm your selection by pressing the OK - Jensen MS4200RS | User Manual - Page 20
you enter names of cities and roads or points of interest, the system compares the character string already entered with all database entries on the map you will notice that only certain letters remain displayed. The Navigation Radio automatically completes entries if only one possible entry is left - Jensen MS4200RS | User Manual - Page 21
OPERATION Normal and expert modes With its radio, CD and CD changer modes, the unit offers two possible methods for selecting the functions. You can choose between the "Expert" and "Common" modes. The "Expert" mode reduces the number of operator steps when selecting search functions. Instead of - Jensen MS4200RS | User Manual - Page 22
type and amount of information the unit will receive via the radio data system (RDS). The RDS-based functions may not be available in certain areas current volume setting. Guid. level (Guidance level) Setting the guidance level controls the volume of announcements in navigation mode. Possible - Jensen MS4200RS | User Manual - Page 23
the TMC station deteriorates drastically, the unit will indicate this by outputting a warning message. If you do not need guidance or are listening to an audio CD, yet you do not wish to go without current traffic announcements, switch on the TA Scan function. In that case the radio will play - Jensen MS4200RS | User Manual - Page 24
. Slide control left: rear Slide control right: front SOUND SETTINGS Bass Treble Balance Fader ✎ Sound settings cannot be performed for navigation information, traffic announcements and telephone operation. Loudness Activate this function to increase low and high tones at low volume settings - Jensen MS4200RS | User Manual - Page 25
SOUND SETTINGS Sound Setup Setting one of the following functions: - Sound Reset: Reset the sound setting to the factory-set values and switch off loudness. - Leveller: Activate this function to equalize volume differences between the various sound sources. - Loud Low: Set the enhancement of low - Jensen MS4200RS | User Manual - Page 26
from which traffic information can be received. Tuning to a stored station Select one of the stations already stored manually or using Autostore. Setting frequency manually (if "Manual tuning" is activated. ➽ next page.) After 50 seconds or after the selection of another tuning method, the radio - Jensen MS4200RS | User Manual - Page 27
from the alphabetically sorted stations list (RDS Memo). Recall Preset Select a previously stored station from the preset list. Manual tuning Activate this function to set a frequency manually, for example, if the desired station cannot be set using the automatic search function. RDS Memo dyn - Jensen MS4200RS | User Manual - Page 28
for stations of the desired program type. Select the desired program type from the list. Press OK to start the PTY search. ✎ PTY is not supported by all RDS-stations and is not available in all countries. Radio Setup Set one of the following functions. - Search Level: Setting the search level - Jensen MS4200RS | User Manual - Page 29
CD PLAYER CD player You can play 12 cm audio CDs on your CD player. A We strongly recommend only playing 12 cm CDs. Please do not use 8 cm CDs (neither with nor without adapter). A ON - Jensen MS4200RS | User Manual - Page 30
The "CD" menu In CD player mode: Press the CD button. : The "CD" menu is displayed. CD PLAYER CD Scan Repeat Track CD Title Extra Info The following functions are available: Scan Activate this function to briefly scan all tracks on the inserted CD. Press OK to cancel the scanning process and - Jensen MS4200RS | User Manual - Page 31
CHANGER CD changer (accessories) A digital Jensen CD changer can be connected to the navigation radio. A We strongly recommend only . If you ignore these recommendations, you risk damaging your unit. A Do not load navigation CDs into the CD changer. CD changer playback If the unit is not yet in CD - Jensen MS4200RS | User Manual - Page 32
CD CHANGER The "CD CHANGER" menu In CD changer mode: Press the CDC button. : The "CD CHANGER" menu is displayed. CD CHANGER Scan Random The following functions are available: Repeat Track Select CD Scan Activate this function to briefly scan all tracks on the currently selected CD. - Jensen MS4200RS | User Manual - Page 33
" menu allows you to adjust the navigation radio to your needs. The following functions muting signal and audio output must be connected to the device (see installation instructions). Tel Signal either RDS or GPS. With GPS, the time of day is received via the Global Positioning System in UTC. With - Jensen MS4200RS | User Manual - Page 34
has been switched on (see also installation instructions). User Setting the user mode for service is subject to a fee. s Code active Activate this function if you wish to protect the device with the security code. ✎ If the power supply is interrupted (e.g. if the unit is removed), the navigation - Jensen MS4200RS | User Manual - Page 35
. If a unit is registered with C-IQ Service as stolen, C-IQ Service will not issue any new activation codes for C-IQ contents. To register your navigation system, you need the Navi ID. In a small number of cases the Initial ID or version number of your map software is also required. You can access - Jensen MS4200RS | User Manual - Page 36
the C-IQ products you have just activated. ✎ The system will inform you if an incorrect code has been entered, and/or if your system software is not capable of processing the encrypted information. In these cases, select either "OK"or "C-IQ Service", if you wish to establish contact, and press - Jensen MS4200RS | User Manual - Page 37
your C-IQ Service: Select "C-IQ Service" in the "C-IQ" menu. Select "Z" to go back to the previous menu. Select "P C-IQ" to establish telephone contact with the C-IQ Service Center. ✎ The "P C-IQ" option is only active if a telephone module is connected to the navigation system (this function - Jensen MS4200RS | User Manual - Page 38
menu. Here, information on the current position of the car and geographic position (GPS position) is obtained. See page 52. Stop guidance Use this option to switch off the navigation display and the audible information. The system's navigation functions remain active in the background. Press the - Jensen MS4200RS | User Manual - Page 39
NAVIGATION Destination input Destinations may be entered in several ways: - Entering - Entering the geographic coordinates (GPS position) directly, e. g. when the destination is not on a digitized street. See page 40. - Transferring a destination from the travel guide information (if you have enabled - Jensen MS4200RS | User Manual - Page 40
NAVIGATION Entering a new address An input wizard will help you enter a new address. It will lead you step by step through all the necessary entries such as country, city, road, house number or crossroads and required routing criterion. Step 1: City or zip code loaded map CD supports this function, - Jensen MS4200RS | User Manual - Page 41
a case, the navigation system will lead you to the entered house number range. ✎ In some cases, the navigation system will also correct your destination address is unavailable (house number, crossroads) or if you wish to be guided to the city or town limits only. In that case, proceed as follows: - Jensen MS4200RS | User Manual - Page 42
is shown. ✎ For smaller towns, it may be that only the "CITY CENTER" option is available. If you select this option, the navigation system will guide you to the city center. Select the required category (e.g. HOTEL, GAS STATION...). : If more than four facilities are stored for the selected - Jensen MS4200RS | User Manual - Page 43
Confirm the destination input with "OK". : The navigation system compares the GPS coordinates you entered with the data on the current system will guide you along digitized roads as far as possible. The system will then display the linear direction and the distance to the destination. If the GPS - Jensen MS4200RS | User Manual - Page 44
reach a via point, you will hear "you have arrived." The navigation system will immediately begin Info on car pos. to plan the route to the position of the car. Long-/Latitude Entering a destination by means of GPS coordinates (geographic latitude and longitude). Travel info If you have enabled a - Jensen MS4200RS | User Manual - Page 45
to you must be deleted from the via point list so that the navigation system may plan the route to the next via point or to the final destination. If a not reached via point is not deleted, the system will continue to try and guide you to this via point. Via points can be deleted in the - Jensen MS4200RS | User Manual - Page 46
announced with audible messages. 4 CD symbol Flashing black: The navigation computer is loading map data for the navigation corridor. The map CD must not be removed during this You can configure the status field in the "System settings" menu. See page 54. * Units displayed are dependent upon the - Jensen MS4200RS | User Manual - Page 47
turn ahead" and W CHEYENNE AVE 1.5 mls Z ª 6,5mls UI 02:45 the instruction to turn e.g. "In 400 feet turn right" W CHEYENNE AVE 400 ft Z ª 4,1mls UI 02:45 "Turn now" advice In addition to information regarding turning, the system also provides "turn now" advice, which is output directly at the - Jensen MS4200RS | User Manual - Page 48
NAVIGATION On longer route segments without intersections or crossroads, an arrow is displayed display a warning if you drive into such an area. Local traffic laws always take precedence over navigation system instructions. At the top left of the guidance screen, you will see the ! symbol, as long - Jensen MS4200RS | User Manual - Page 49
NAVIGATION Route selection During guidance, you may also modify the route criterion and activate or deactivate dynamic route planning. The system will then plan a new route taking into account the new setting of the current position of your car. In the guidance screen, select the symbol - Jensen MS4200RS | User Manual - Page 50
Select "Return" to quit the road list. NAVIGATION Travel data Route list Event on the route Destination Display of current vehicle location with country code, city, road, and, if the screen will display the GPS position (geographic longitude and latitude). ✎ The GPS position can be accessed at - Jensen MS4200RS | User Manual - Page 51
NAVIGATION Displaying / deleting via points If via points have been entered for the with Name (if entered), country code, city, road, and crossroads. GPS / Compass Display of the following information: 1. GPS reception status: Displays the number of GPS satellites received. With an unobstructed - Jensen MS4200RS | User Manual - Page 52
, time delay/saving). Confirm the planned alternative route with "Yes" or reject it with "No". ✎ If you reject the alternative route, the navigation system will plan a new route to the destination from the current position of the car. Alternative route Distance: +5.0 mls Time: +13 min Accept - Jensen MS4200RS | User Manual - Page 53
Address manager The navigation radio offers the opportunity of storing at least 30 destination addresses in a personal address book. In the address book, you can store your destinations separately - Jensen MS4200RS | User Manual - Page 54
NAVIGATION Store current loc. Would you like to store a favorite restaurant in the destination memory? You can store the current position of your car as follows: - Jensen MS4200RS | User Manual - Page 55
vehicle location as calculated by the Global Positioning System. Longitude, altitude and elevation above sea level (provided adequate GPS reception is available) will be displayed. Car position Display of current vehicle location with country code, city and street. This option is only available - Jensen MS4200RS | User Manual - Page 56
" menu is displayed. The following information screens are available: System settings Speed Guidance screen Dyn. route sett. Language Speed In the "Speed" menu, you can configure the following settings: Speed correction The navigation radio uses an average cruising speed to calculate the remaining - Jensen MS4200RS | User Manual - Page 57
NAVIGATION Guidance screen Here you can select the information which should appear on to be replaced. : You will be prompted to insert the software CD. Insert the language CD in the CD player of the radio. Follow the system instructions for loading other languages. s Turn now advice If this - Jensen MS4200RS | User Manual - Page 58
the installation angle", ➽ page 7. Service For diagnosing hardware and software problems (code-protected). The option "Service" is exclusively reserved for service work on the navigation radio performed by an authorized service company. System Info The "System Info" menu displays information about - Jensen MS4200RS | User Manual - Page 59
of functions provided by the unit, you can load new software versions from a software update CD, if available for your navigation radio: Switch on the radio. Open the front and remove the CD if still inserted. Insert the software update CD into the CD player. A safety check appears. Confirm - Jensen MS4200RS | User Manual - Page 60
, please read the operating instructions thoroughly and go through the following check list; it may be possible to quickly remedy an apparent malfunction. Symptoms General Navigation radio not functioning. No display. Audio or map CD rejected by the unit. System switches off the sound during - Jensen MS4200RS | User Manual - Page 61
TROUBLESHOOTING Symptoms Navigation Display shows "Please insert map CD". System reacts very slowly to entries or requires a long time for calculation. Only some of the options are available in the main menu. The number of satellites in the "GPS contents. • Contact C-IQ Service to activate map data - Jensen MS4200RS | User Manual - Page 62
noise, to correction of antenna problems, to costs incurred for installation , accessories, or vehicle electrical systems. This Warranty does not apply factory serial number/bar code label(s) or markings. which vary from state to state. U.S.A: Audiovox Corporation, 150 Marcus Blvd., Hauppauge, NY - Jensen MS4200RS | User Manual - Page 63
Range: 530kHz - 1710kHz Sensitivity (-20dB): 30uV Signal to Noise @ 1kHz: 65dB Frequency Response: 40Hz - 2kHz, -3dB EIAJ Amplifier Output (PEAK) Total System Power: 160 watts PEAK Power Output: 40 watts X 4 PEAK Speaker Impedance: 4-ohms Reference Supply Voltage: 14.4VDC General Power Supply: 11 to - Jensen MS4200RS | User Manual - Page 64
- Jensen MS4200RS | User Manual - Page 65
v.033104
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
 |
 |
M
S
4200RS
User Manual
&
Installation Instructions
Audiovox Electronics Corporation
150 Marcus Boulevard, Hauppauge, NY 11788
www.Jensen.com
1-800-323-4815
© 2004 Audiovox