Jensen MS4200RS User Manual - Page 33
INITIALISATION 230, The fiINITIALISATIONfl menu 230, Beep Level: 1, Scan Time: 15s, Off Logic
View all Jensen MS4200RS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
INITIALIZATION The "INITIALIZATION" menu Select "Initialisation" in one of the following menus: "RADIO", "INFORMATION", "CD" or "CD CHANGER". : The "INITIALISATION" menu is displayed. The "INITIALISATION" menu allows you to adjust the navigation radio to your needs. The following functions are available: INITIALISATION Beep Level: 1 Clock Settings Scan Time: 15s On Off Logic Telephone Adapt your unit's telephone input to your car phone: - NONE: No car phone is connected to the unit. - MUTE: Playback on the current source is automatically interrupted when your car phone is in use. For this purpose, the car phone's muting signal must be connected to the device (see installation instructions). - IN: Playback on the current source is automatically interrupted and the incoming call is played through the car loudspeakers. For this purpose, the car phone's muting signal and audio output must be connected to the device (see installation instructions). Tel Signal: Adapt your unit's telephone input to the muting signal of your car phone: - LOW: Muting signal "active low". Radio switches to mute at 0 V. - HIGH: Muting signal "active high". Radio switches to mute at 12 V. Tel. Level: Adapt the car phone's volume to the navigation radio's telephone input. ✎ The volume adjustment can be set to between -30 and +30. Beep Type Select a confirmation/alert sound. You have the choice between 4 different sounds. Beep Level: Set a level between 1 and 5 for the confirmation/alert sound. Clock Settings Setting the time, the time format and the time zone: - Clock Type: Select either RDS or GPS. With GPS, the time of day is received via the Global Positioning System in UTC. With RDS, the time is synchronized with the data of the currently received RDS station (the time signal transmitted by the RDS stations may be incorrect). - Clock Format: Select between 12 or 24 hour format. - Timezone (only for GPS clock): Set the time difference to UTC (equivalent to Greenwich Mean Time, London). Scan time Setting for the scan time for frequency, storage or track scanning. Choose 5, 10 or 15 seconds. 30