Jensen MS4200RS User Manual - Page 43
Special facilities in the vicinity of the current position, Destination input via GPS coordinates
View all Jensen MS4200RS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
NAVIGATION Special facilities in the vicinity of the current position You may also set a destination address by selecting a special facility in the vicinity of the current vehicle location. Briefly press the DEST/P.O.I. button twice or: Select "Info on car pos." in the destination input menu. : A list of categories of special facilities is shown. Select the required category. : A list of facilities pertaining to the selected category, located in the vicinity of the current vehicle location, appears. Additionally, distance and direction to the facilities are shown. Proceed as described on the previous page. Train station AMTRAK SACRAMENTO 17 km AMTRAK SUISUN CIT 26 km Note: You will always see a list of facilities from "Info on car pos.", even if there is no facility from the selected category directly at the car position. The facilities list is sorted by distance to the car position, i.e. the facility closest to the car position will be first in the list. Destination input via GPS coordinates If you know the GPS coordinates of a destination, you may enter them directly. In the main menu, select "Destination input. Select "Long-/Latitude" in the "Destination input" menu. : The GPS coordinates input menu appears. Mark the required coordinate using the cursor keys. Then press OK. Long-/Latitude 115°09'43" West 36°14'21" North OK Quit Next, set the required values for degrees, minutes, seconds and north/south or east/west using the cursor keys. Confirm the destination input with "OK". : The navigation system compares the GPS coordinates you entered with the data on the current map CD and plans the route. Notes: If the destination is beyond the digitized roads, the system will guide you along digitized roads as far as possible. The system will then display the linear direction and the distance to the destination. If the GPS coordinates you entered should be outside the limits of the current map CD, the system will display an error message. 40