Kenwood DNX573S Quick Start Guide - Page 18

Radio/ HD Radio™ Tuner/ SiriusXM® SiriusXM® Basic Operation 1) Press the button. 2) Touch [ ]. 3) Touch [SiriusXM]. 1 5 ÑÑFunction panel 1) Touch on the left side of the screen. ÑÑCategory/Channel search 1) Touch [1]. 2) Select a category, and then select a channel. 2 4 3 1 Switches the seek mode in the following sequence; [SEEK1], [SEEK2]. • SEEK1: Tunes channels one after the other. • SEEK2: Selects channels in preset (memory) one after the other. 2 Displays the information of the current channel. Touching [ ] allows you to switch between Content A and Content B. 3 L : Plays or pauses. CHS CHR : Selects a channel. 1 : Display the Category search screen. 4 Recalls the memorized channel. When touched for 2 seconds, stores the current receiving channel in memory. 5 Displays the "Mix" (TuneMix™), "Scan" (TuneScan™) indicator and the received signal strength of the SiriusXM tuner. Direct Display the direct channel search screen. Channel SETUP Display the SiriusXM SETUP screen. Band Switches the band. (SXM1/ SXM2/ SXM3/ SXM4) Replay/ Turns the replay mode on or off. Live Tune Scan *1 Hear a few seconds of the songs from each of the SmartFavorite music channels on the current preset band. Tune Mix *2 When you turn it ON, the preset channels on P1P6 are shuffled to provide a playback which is a blend of songs from your favorite channels. *1 Compatible with SXV200 or later tuner models. *2 Compatible with SXV300 or later tuner models. ÑÑReplay You can replay the last 60 minutes of the current channel. 1) Touch [L] or [Replay] on the function panel. 3 3 L : Plays or pauses. E F : Press to skip to the previous/next track. Press and hold to rewind or fast forward. (It will be cancelled automatically after about 50 seconds.) CHS CHR : Tune in a channel. 1 : Display a list of recorded data on a program basis. 2) Touch [1]. 3) Select the desired program. 18