Kenwood DNX573S Quick Start Guide - Page 22

CCoontnrotllrinoglAluidniog Audio 1 Press the DNX8 DNX7 button/ DNX6 DNX5 Volume knob. 2 Touch [Audio]. Audio screen appears. Equalizer Control 1 Touch [Equalizer] on the Audio screen. 2 Touch the screen and set the Graphic Equalizer as desired. ÑÑRecall the EQ curve 1) Touch [Preset Select]. 2) Select EQ curve. ✎✎NOTE • For detailed operation, see Controlling Audio (P.90) in the Instruction Manual. Controlling General Audio 1 Touch [Fader / Balance] on the Audio screen. 2 Set each item as follows. [C] [D] Adjust the right and left volume balance. [R] [S] Adjust the front and rear volume balance. Gain level (boxed area) Adjust the gain level by touching the each frequency bar. You can select frequency bar and adjust its level by [R], [S]. Preset Select Displays the screen to recall the preset equalizer curve. Memory Saves the adjusted equalizer curve to "User1" to "User4". Initialize The current EQ curve returns to flat. ALL SRC Apply the adjusted equalizer to all sources. Touch [ALL SRC] and then touch [OK] on the confirmation screen. Bass EXT (Bass Extend Settings) When turned on, the frequency lower than 62.5 Hz is set to the same gain level as 62.5 Hz. SW Level Adjusts the subwoofer volume. ✎✎NOTE • [iPod] is available only during iPod source. ÑÑSave the EQ curve 1) Adjust the EQ curve. 2) Touch [Memory]. 3) Select where to save. 22