Kenwood DNX8120 Instruction Manual - Page 65

When the speaker type and size are set, the speaker crossover network and equalizer curve are set automatically. 5 10 9 6 7 7 8 11 5 Selects a speaker to be set. (see , page 65) 6 Sets the use or no use of tweeter. (see , page 65) 7 Selects a speaker type. (see , page 65) 8 Displays the Speaker Crossover Setup screen. (See , page 68) You can adjust the crossover setup that was set automatically when you selected the speaker type. 9 Displays the Channel Level Setup screen. p Displays the Car Type Set Up screen. q Returns to the "SETUP Menu" screen. Speaker Set Up You can select a speaker type and its size to get the best sound effects. 1 Select a speaker you wish to adjust 1 2 2 5 3 3 4 1 Center speaker 2 Front speaker 3 Rear speaker 4 Subwoofer 5 Tweeter setup You can set the tweeter when you are selecting front speakers. If you are using a tweeter together with the front speakers, set the tweeter to "Use". In the "Use" position, the Equalizer is adjusted to its best position. 2 Select a speaker type 12 15 14 13 16 w Selects a speaker to be set. (see , page 66) e Sets the speaker volume. (see , page 66) r Starts or stops test signal tone output for setup check. t Displays the Speaker Set Up screen. y Returns to the "SETUP Menu" screen. You can select any of the following speaker types. Center speaker: NONE, 2 3/4x1 9/16 inch, 2 inch, 4 inch, 5 inch, 6 1/2 inch over Front speakers: OEM, 4 inch, 5 inch, 6 1/2 inch, 6 3/4 inch, 7 inch, 4x6, 5x7, 6x8, 6x9, 7x10 Rear speakers: NONE, OEM, 4inch, 5inch, 6 1/2inch, 6 3/4inch, 7inch, 4x6, 5x7, 6x8, 6x9, 7x10 Next page 3 English 65