Kenwood DNX8120 Instruction Manual - Page 95
SRS WOW User Setup, Surround Control
UPC - 019048177223
View all Kenwood DNX8120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
SRS WOW User Setup You can adjust the audio SRS. 1 Display the Audio SRS Adjust screen Surround Control You can set up the sound field. 1 Display the Surround Control screen Touch in the "Audio Control Menu" screen (page 92). 2 Adjust the Audio SRS 1 2 3 4 5 1 Selects a speaker to be set (Front, Rear or Center speaker). 2 Sets the TruBass effect level. 3 Sets the FOCUS effect level. 4 Sets the SRS 3D effect level. 5 Returns to SRS WOW Control screen. ⁄ • When the rear speaker sound is switched, the audio source that is output at the AV OUTPUT terminal is also switched to the same source. • FOCUS: Adjusts the vertical position of the speaker and sound image by virtual adjustment. • TruBass: Assists the playback for the super bass sound. • SRS 3D: Makes a natural 3D sound field. • You cannot set SRS 3D in tuner source. 2 1 1 3 4 1 Sets a sound field. You can select any of the following sound fields. • "Bypass" • "Bypass+Center" • "Dolby PLII Movie" • "Dolby PLII Music" • "Dolby PLII Matrix" 2 Displays the present source information. The stream (Dolby Digital, dts, Linear PCM, Packd PCM, MPEG, JPEG, DivX, SDDS, AAC or MP3/WMA), input channels (front or rear channels), and sampling frequency are displayed. 3 Displays the Surround Control Adjustment screen. (See , page 96) 4 Returns to the "Audio Control Menu" screen. ⁄ • When you have selected the TV or TUNER source and when you set the Dolby PL, we recommend you to select the "Dolby PLII Matrix" mode. If you select another Dolby PLII mode, the sound is NOT output from rear speakers when you receive monaural broadcasting sounds. • Surround control can be set for each source. English 95