Kenwood KDC-MP2032 Instruction Manual - Page 34

Specifications Specifications subject to change without notice. FM tuner section Frequency range (200 kHz space) : 87.9 MHz - 107.9 MHz Usable sensitivity (S/N = 30dB) : 9.3dBf (0.8 μV /75 Ω) Quieting Sensitivity (S/N = 50dB) : 15.2dBf (1.6 μV /75 Ω) Frequency response (±3.0 dB) : 30 Hz - 15 kHz Signal to Noise ratio (MONO) : 70 dB Selectivity (±400 kHz) : ≥ 80 dB Stereo separation (1 kHz) : 40 dB AM tuner section Frequency range (10 kHz space) : 530 kHz - 1700 kHz Usable sensitivity (S/N = 20dB) : 28 dBμ (25 μV) CD player section Laser diode : GaAlAs Digital filter (D/A) : 8 Times Over Sampling D/A Converter : 1 Bit Spindle speed KDC-MP2032/MP2032CR/MP232/MP202 : 1000 - 400 rpm (CLV 2times) KDC-232MR : 500 - 200 rpm (CLV) Wow & Flutter : Below Measurable Limit Frequency response (±1 dB) : 10 Hz - 20 kHz Total harmonic distortion (1 kHz) : 0.01 % Signal to Noise ratio (1 kHz) KDC-MP2032/MP2032CR/MP232/MP202 : 105 dB KDC-232MR: 93 dB Dynamic range : 93 dB MP3 decode KDC-MP2032/MP2032CR/MP232/MP202 : Compliant with MPEG-1/2 Audio Layer-3 WMA decode KDC-MP2032/MP2032CR/MP232/MP202 : Compliant with Windows Media Audio Audio section Maximum output power KDC-MP2032/232MR : 50 W x 4 KDC-MP2032CR/MP232/MP202 : 45 W x 4 Full Bandwidth Power (at less than 1% THD) : 22 W x 4 Speaker impedance : 4 - 8 Ω Tone action Bass : 100 Hz ±8 dB Middle : 1 kHz ±8 dB Treble : 10 kHz ±8 dB Preout level / Load (during disc play) : 2000 mV/10 kΩ Preout impedance : ≤ 600 Ω General Operating voltage (11 - 16V allowable) : 14.4 V Current consumption : 10 A Installation Size (W x H x D) : 182 x 53 x 155 mm 7-3/16 x 2-1/16 x 6-1/8 inch Weight : 3.1 lbs (1.40 kg) 34 | English