Kenwood KDC-X993 Instruction Manual - Page 53
Installation the Microphone Unit - wiring
UPC - 019048183248
View all Kenwood KDC-X993 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Accessory of KDC-X993 Installation the Microphone Unit 1 Check the installation position of the microphone (accessory 5). 2 Remove oil and other dirt from the installation surface. 3 Install the microphone. 4 Wire the microphone cable up to the hands-free box with it secured at several positions using tape or the like. Accessory5 Fix a cable with a commercial item of tape. Peel the release coated paper of double-face adhesive tape to fix on the place shown above. Adjust the direction of the microphone to the driver. ⁄ • Install the microphone as far as possible from the cellphone. English | 53
English
|
53
Accessory of KDC-X993
Installation the Microphone Unit
1
Check the installation position of the microphone
(accessory
5
).
2
Remove oil and other dirt from the installation
surface.
3
Install the microphone.
4
Wire the microphone cable up to the hands-free
box with it secured at several positions using tape
or the like.
Fix a cable with a commercial
item of tape.
Peel the release coated paper of double-face adhesive tape to
fix on the place shown above.
Adjust the direction of the microphone to the driver.
Accessory
5
⁄
• Install the microphone as far as possible from the cell-
phone.