Kenwood NX-320 Operation Manual - Page 35
Stun Code, EMERGENCY CALLS, Activity Detection
View all Kenwood NX-320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
■ Stun Code This function is used when a transceiver is stolen or lost. When the transceiver receives a call containing a stun code, the transceiver becomes disabled. The stun code is cancelled when the transceiver receives a call with a revive code. EMERGENCY CALLS If your transceiver has been programmed with the Emergency function, you can make emergency calls. 1 Press and hold the key programmed as [Emergency]. • Ask your dealer for the length of time necessary to hold this key before the transceiver enters Emergency mode. • When the transceiver enters Emergency mode, it will change to the Emergency channel and begin transmitting based on how it is set up by your dealer. 2 To exit Emergency mode, press the [Emergency] key again. • If the Emergency mode completes a preset number of cycles, Emergency mode will automatically end and the transceiver will return to the zone and channel that was in use before Emergency mode was entered. Note: ◆ Your dealer can set the transceiver to emit a tone when transmitting in Emergency mode. ◆ Your dealer can set the transceiver to emit tones and received signals as normal, or mute the speaker during Emergency operation. ■ Activity Detection Press the key programmed as [Activity Detection], to toggle Activity Detection ON and OFF. If an event occurs while Activity Detection is enabled, the transceiver enters Emergency mode. 23