Kenwood TK-3360 Operation Manual 2 - Page 20
Key Lock, Lone Worker, Low Transmit Power, Monitor, Monitor Momentary, Paging
View all Kenwood TK-3360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
■ Key Lock Press this key to lock and unlock the transceiver keys. While Key Lock is activated, you cannot use the Auxiliary, Side 1, Side 2, and microphone PF keys. Note: You can still use the following key functions when Key Lock is activated: Emergency, Lone Worker, Monitor, Monitor Momentary, Squelch Off, Squelch Off Momentary, Key Lock, PTT + Autodial. ■ Lone Worker Press this key to toggle the Lone Worker function ON or OFF. If the transceiver is not operated for the pre-programmed time, it will emit a Lone Worker tone. Subsequently, if no operation is performed while the tone is emitted, the transceiver will enter Emergency mode. ■ Low Transmit Power Press this key to change the transmit power on the current channel to low power, to conserve battery energy. ■ Monitor Press this key to deactivate QT or DQT signaling. Press this key again to return to normal operation. ■ Monitor Momentary Press and hold this key to deactivate QT or DQT signaling. Release the key to return to normal operation. ■ Paging After selecting your desired FleetSync channel, press this key to transmit your PTT List ID, to request a call. 10