Kenwood VR-517 User Manual - Page 21

Listening to a source component VOLUME CONTROL INPUT SELECTOR INPUT SELECTOR VOLUME RC-R0511 RC-R0615/R0617 1 Use the INPUT SELECTOR knob to select the source you want to listen to. The input sources change as shown below: Selecting a source using the INPUT SELECTOR knob. VR-506/KRF-V6050D 1 "PHONO" 2 "TUNER" 3 "CD/DVD" 4 "TAPE" or "MD" 5 "VIDEO1" if VIDEO2/MONITOR is VIDEO2 6 "VIDEO2" 7 "DVD/6ch" 8 "AV AUX" else if VIDEO2/MONITOR is MONITOR 6 "DVD/6ch" 7 "AV AUX" KRF-V5050D 1 "PHONO" 2 "TUNER" 3 "CD/DVD" 4 "TAPE" or "MD" 5 "VIDEO1" if VIDEO2/MONITOR is VIDEO2 6 "VIDEO2" 7 "DVD/6ch" else if VIDEO2/MONITOR is MONITOR 6 "DVD/6ch" VR-505 1 "AUX" 2 "TUNER" 3 "CD/DVD" 4 "TAPE" or "MD" 5 "VIDEO1" if VIDEO2/MONITOR is VIDEO2 6 "VIDEO2" 7 "DVD" else if VIDEO2/MONITOR is MONITOR 6 "DVD" VR-517/KRF-V5550D 1 "AUX" 2 "TUNER" 3 "CD/DVD" 4 "TAPE" or "MD" 5 "VIDEO1" if VIDEO2/MONITOR is VIDEO2 6 "VIDEO2" 7 "DVD/6ch" 8 "AV AUX" (VR-517 only) else if VIDEO2/MONITOR is MONITOR 6 "DVD/6ch" 7 "AV AUX" (VR-517 only) Normal playback 2 Start playback from the selected source. 21 3 Use the VOLUME CONTROL knob (VOLUME keys) to adjust the volume. Selecting VIDEO 2/MONITOR Depending on the component connected to the VIDEO 2/MONITOR jacks, select either the "VIDEO 2" setting or the "MONITOR" setting, as appropriate. 9 Adjusting the sound MULTI CONTROL SOURCE DIRECT SOUND Operations SPEAKERS A/B PHONES (SPEAKER/MUTE) VOLUME CONTROL SOUND MULTI CONTROL BASS BOOST/ B. BOOST VOLUME MUTE RC-R0511 RC-R0615/R0617 Adjusting the tone You can adjust the sound quality when the receiver is in the PCM stereo and analog stereo mode. 1 Press the SOUND key to select the tone mode to be adjusted. BASS: Select this to adjust the low frequency range. (Press the SOUND key once.) TREB: Select this to adjust the high frequency range. (Press the SOUND key twice.) SP A B TI.VOL CLIP MUTE RDS EON PTY TP TA NEWS L CR LFE SW LS S RS FM AUTO SOUND DIGITAL AUTO AM PRO LOGIC S.DIRECT MEMO MHz 3 STEREO MONITOR ST. kHz DOWN MIX DSP TUNED 2 Use the MULTI CONTROL keys to adjust the sound quality. • The bass and treble levels are adjustable from -10dB to +10dB in 2 step increments. • The adjustment item is displayed for approximately 8 seconds. Once-touch low frequency emphasis (bass boost) (remote control only) You can adjust the sound quality when the receiver is in the PCM stereo and analog stereo modes. Press the B. BOOST (BASS BOOST) key. • Press the key once to select the maximum (+10dB) low frequency emphasis setting. • This key does not function when the receiver is in the sound quality or ambience effects adjustment mode. Switching back to the previous setting Press the B. BOOST (BASS BOOST) key again.