Kenwood VR-517 User Manual - Page 41

Specifications For U.S.A and Canada AUDIO section (VR-506) Rated power output during STEREO operation 100 watts per channel minimum RMS, both channels driven, at 8 Ω from 40Hz to 20 kHz with no more than 0.7% total harmonic distortion. (FTC) Effective power output during SURROUND operation FRONT (40-20kHz, 0.7% T.H.D. at 8 Ω one channel driven 100 W + 100 W CENTER (40-20kHz, 0.7% T.H.D. at 8 Ω one channel driven 100 W SURROUND (40-20kHz, 0.7% T.H.D. at 8 Ω one channel driven 100 W + 100 W Total harmonic distortion 0.050% (1 kHz, 50W, 8 Ω) Frequency response CD 10 Hz ~ 60 kHz, +0 dB, -3.0 dB Signal to noise ratio (IHF'66) PHONO (MM 74 dB CD 90 dB Input sensitivity / impedance PHONO (MM 2.5 mV / 27 kΩ CD 200 mV / 47 kΩ MONITOR IN (VIDEO2/MONITOR 200 mV / 47 kΩ DVD/6ch INPUT 200 mV / 47 kΩ Output level / impedance TAPE REC 200 mV / 1 kΩ MONITOR OUT (VIDEO2/MONITOR 200 mV / 1 kΩ PRE OUT (SUBWOOFER 1.5 V / 2.2 kΩ Tone control BASS 10 dB (at 70 Hz) TREBLE 10 dB (at 10 kHz) AUDIO section (VR-505/517) Rated power output during STEREO operation 100 watts per channel minimum RMS, both channels driven, at 8 Ω from 40 Hz to 20 kHz with no more than 0.7% total harmonic distortion. (FTC) Effective power output during SURROUND operation FRONT (40-20kHz, 0.7% T.H.D. at 8 Ω one channel driven 100 W + 100 W CENTER (40-20kHz, 0.7% T.H.D. at 8 Ω one channel driven 100 W SURROUND (40-20kHz, 0.7% T.H.D. at 8 Ω one channel driven 100 W + 100 W Total harmonic distortion 0.050% (1 kHz, 50W, 8 Ω) Frequency response CD 10 Hz ~ 60 kHz, +0 dB, -3.0 dB Signal to noise ratio (IHF'66) CD 90 dB Input sensitivity / impedance CD 200 mV / 47 kΩ MONITOR IN (VIDEO2/MONITOR 200 mV / 47 kΩ PHONO (MM) (VR-517 2.5 mV / 27 kΩ DVD/6ch INPUT (VR-517 200 mV / 47 kΩ Output level / impedance TAPE REC 200 mV / 1 kΩ MONITOR OUT (VIDEO2/MONITOR 200 mV / 1 kΩ PRE OUT (SUBWOOFER) (VR-505 1.5 V / 2.2 kΩ Tone control BASS 10 dB (at 70 Hz) TREBLE 10 dB (at 10 kHz) Caution : Read this page carefully to ensure safe operation. 41 DIGITAL AUDIO section Sampling frequency 32 kHz, 44.1 kHz, 48 kHz, 96kHz Input level / impedance / wave length Optical 15 dBm ~ -21 dBm), 660 nm ±30nm Coaxial 0.5 Vp-p / 75 Ω VIDEO section VIDEO inputs / outputs VIDEO (composite 1 Vp-p / 75 Ω S VIDEO inputs / outputs (VR-506/517) S VIDEO (luminance signal 1 Vp-p / 75 Ω S VIDEO (chrominance signal 0.286 Vp-p / 75 Ω FM tuner section Tuning frequency range 87.5 MHz ~ 108 MHz Usable sensitivity (MONO) 1.3 µV (75 Ω)/ 13.2 dBf (75 kHz DEV., SINAD 30 dB) 50dB quieting sensitivity STEREO 28 µV (75 Ω)/ 40.2 dBf Total harmonic distortion (1 kHz) MONO 0.5% (71.2 dBf input) STEREO 0.7% (71.2 dBf input) Signal to noise ratio (1 kHz, 75 kHz DEV.) MONO 75 dB (71.2 dBf input) STEREO 68 dB (71.2 dBf input) Stereo separation (1 kHz 40 dB Selectivity (±400 kHz 70 dB Frequency response 30 Hz ~ 15kHz), +0.5 dB, -3.0 dB AM tuner section Tuning frequency range 10 kHz step 530 kHz ~ 1,700 kHz Usable sensitivity (30% mod., S/N 20 dB) ......... 16 µV / (600 µV/m) Signal to noise ratio (30% mod. 1 mV input 50 dB GENERAL Power consumption 2.6 A AC outlet SWITCHED total 150 W, 1.25 A max.) Dimensions W : 440 mm (17-5/16") H : 143 mm (5-11/16") D : 400 mm (15-3/8") Weight (Net) VR-506/517 8.8 kg (18.92 lb) VR-505 8.7 kg (18.89 lb) Additional Information Notes 1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. 2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).