Kenwood VR-5700 User Manual - Page 33
THX Sur EX On, THX Sur EX Auto, THX On, THX Off
View all Kenwood VR-5700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Using Receiver How Do I Adjust the Surround Modes? ÷ THX Sur EX On The input signal is decoded automatically into 6.1-channel signals if the input signal is Dolby Digital or DTS and contains two channel surround signals. The THX operation is activated. ÷ THX Sur EX Auto The input signal is decoded into 6.1-channel signals only when the input contains the Dolby Digital Surround EX encoded identification signal. The THX operation is activated ÷ THX On The THX operation is activated. (6.1channel decoding will not be applied.) ÷ THX Off The THX Surround EX and THX operations are deactivated. • To play Dolby Digital Surround EX-encoded software in 6.1 channels, it is required to set the THX Surround EX mode to On or Auto. Note that some of Dolby Digital Surround EX-encoded software does not contain the identification signal. In this case, set the THX Surround EX mode to On. • Set the THX mode to Off when DTS-ES decoding is required. • The THX operation is not activated with the 96k fs PCM signal. • When Dolby Pro Logic II: Music is selected while THX Sur EX On, THX Sur EX Auto or THX On is selected, the THX mode will be switched Off. • As long as Dolby Pro Logic II: Music is selected, switching the THX mode does not produce any effect. • Different THX modes can be selected for the different input devices. The selected THX modes for the separate input devices are stored in the memory. 25