Kenwood VR-5900 User Manual - Page 101
How Do I Operate Devices?, Kenwood CD-3280M or CD-2280M 200-Disc CD Changers are specifi
View all Kenwood VR-5900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
How Do I Operate Devices? How Do I Operate Devices? General instructions for operating any device are given under "How Do I Operate Devices?" on page 35. Some operations, however, are a little different depending on the zone you are in. The following section discusses how devices may operate differently in different zones. Operating Devices in Zone A To select the speakers for Zone A, press the button for Speakers-A on the front panel of the receiver. To set up PowerTouch III to control Zone A devices, follow the instructions under "How Do I Switch Control Modes?" on page 91. To control a second CD player from Zone A, use , unless you are using a Kenwood 200-Disc CD Changer (see below). Kenwood CD-3280M or CD-2280M 200-Disc CD Changers are specifically designed to work with the VR-5900 in a dual-zone environment. Since they contain two CD players, one can play in Zone A while the other is playing simultaneously in Zone B. Use CD1 to control the changer for Zone A and CD2 to control the changer for Zone B. Operating Devices in Zone B If you are using the receiver's Speaker B outputs to power the speakers in Zone B, press the button for SPEAKERS B on the front panel of the receiver to activate the speakers in Zone B. The Listen Mode in Zone A will automatically switch to stereo when you turn SPEAKERS B on. To set up PowerTouch III to control Zone B devices, follow the instructions under "How Do I Switch Control Modes?" on page 91. Operation using the SYS.POWER button on PowerTouch III To perform the Multi-Zone operation, switch the Multi Zone function On in advance (see page 91). 1. When the receiver is OFF (STANDBY mode): • To output the video and audio to Zone A, set the Zone setting of the PowerTouch III to Zone A then press the SYS.POWER button on the PowerTouch III. • To output the video and audio to Zone B, set the Zone setting of the PowerTouch III to Zone B then press the SYS.POWER button on the PowerTouch III. Zones 93