Kenwood VR-5900 User Manual - Page 47
Playback of the device connected to the CD2/TAPE2 MONITOR, To Customize the PowerTouch III Screen
View all Kenwood VR-5900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Using PowerTouch III How Do I Operate Devices? Playback of the device connected to the CD2/TAPE2 MONITOR These instructions are for operating a second CD player or tape deck from a single-Zone installation or from Zone A. For more information on operating devices in a multi-Zone setup, see "Chapter Three: Using PowerTouch III in Multiple Zones". To operate a second CD player or tape deck: 1. Touch (HOME1) on the Quick Access menu. 2. Touch (CD2/TAPE2 ON/OFF). The CD2/TAPE2 MONITOR indicator on the receiver also lights up. In this condition, the device connected to the CD2/TAPE2 inputs can be monitored. Each touch of toggles its condition between ON and OFF. After completing playback of the device connected to the CD2/TAPE2 MONITOR, be sure to set this condition to OFF. 3. Touch . The commands appear for the device you connected to this jack set and identified to PowerTouch III. 4. Use the available commands as your CD player or tape deck remote. Touch (More) to access any customized commands you have taught PowerTouch III for this device. Touch the command to use it. For more information on teaching commands to PowerTouch III, see "To Customize the PowerTouch III Screen" on page 43 of the Connections and Setup Guide. To select the input on the receiver, use the CD2/TAPE2 MONITOR button inside the door. The CD2/TAPE2 MONITOR indicator lights up when it is selected. After completion of playback, press the CD2/ TAPE2 MONITOR button again so that the CD2/TAPE2 MONITOR indicator goes out. 39