KitchenAid KFPM773CS Use & Care Guide - Page 13
Egg Whip Assembly and Use, To assemble, To disassemble, Citrus Press Assembly and Use, Paddle, Cover
View all KitchenAid KFPM773CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
ENGLISH Preparing the Food Processor for Use Egg Whip Assembly and Use The egg whip is designed to whip egg whites or heavy cream to create toppings or soft meringues. For the best results, at least 1 cup (235 ml) of heavy cream or 3 egg whites should be whipped at a time. Whipping smaller quantities may not result in maximum volume. To assemble: The egg whip consists of 4 pieces - the egg whip stem, stem cover, whip paddle, and cap. Cap Stem Cover Whip Paddle Stem 1. Place the egg whip stem on the power shaft. Slowly turn the stem until it drops fully onto the shaft. 2. Align the L-shaped notch on the whip paddle with the small post on the stem cover, and slide the paddle onto the cover. Turn slightly to lock paddle. 3. Fit the stem cover and paddle over the egg whip stem. Push downward to engage the ridges of the stem with the gears of the paddle. 4. Fit the egg whip cap over the egg whip stem. Push downward to lock it into place. 5. Place the work bowl cover on the work bowl with the feed tube just to the left of the handle. Make sure the center pin of the egg whip fits into the center opening of the cover. Grasp the feed tube and turn the cover to the right to lock it into place. Insert the pusher into the feed tube. The egg whip is now ready to operate. 6. Press the ON Button and whip ingredients to the desired texture and volume. Press the OFF Button when finished. To disassemble: 1. Unplug the food processor. 2. Remove the work bowl cover with a clockwise turn. 3. Lift the egg whip assembly off the power shaft. Remove whipped ingredients from the work bowl. 4. Pull the cap from the egg whip assembly. Push downward on the stem pin to remove stem from the stem cover. Turn the egg whip paddle to unlock, and slide the paddle from the stem cover. Citrus Press Assembly and Use 1. Position and lock the work bowl on the base. 2. Place the strainer basket in the bowl with the locking clip to the left of the work bowl handle. 3. Turn the basket counter-clockwise until the clip locks into the handle. Continued on next page 11