KitchenAid KGCU463VSS Installation Guide - Page 17
Natural Gas Orifice Spud/Hood Chart, IMPORTANT, Burner Rating, Burner Style, Burner orifice spud,
UPC - 883049155975
View all KitchenAid KGCU463VSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
4. Using a T15 Torx® screwdriver, remove the burner base. Large Dual Burner A A. Burner cap B B. Burner head C C. Gas opening D D. Burner base A Medium Burner A. Burner cap B B. Burner head C C. Gas opening D D. Burner base A Small Burner A. Burner cap B B. Burner head C. Gas opening C D. Burner base D 5. Apply masking tape to the end of a 7 mm nut driver to help hold the gas orifice spud in the nut driver while changing it. Insert nut driver into gas opening and press down onto the gas orifice spud and remove by turning the gas orifice spud counterclockwise and lifting out. Set gas orifice spud aside. 6. Replace with correct Natural gas orifice spud. See the "Natural Gas Orifice Spud/Hood Chart." Use the following chart to find the exact orifice spud placement. Natural Gas Orifice Spud/Hood Chart Burner Rating Size Burner Style 5,000 BTU 1.01 mm Small burners 8. For medium and large burners, replace the burner base using both screws. Replace burner head and cap. For small burners, replace igniter using the following instructions. Replace Igniter - Small Surface Burners Only 1. Unplug igniter wire from electrode. IMPORTANT: Do not let the igniter wire fall down under the cooktop surface. 2. Using needle-nose pliers, remove the retaining clip and spring from the igniter. AB C A. Retaining clip B. Spring C. LP gas igniter 3. Remove LP gas igniter and spacer from the burner base. 4. Insert Natural gas igniter into burner base. Slide spring onto the underside of the igniter and lock into place with the retaining clip. AB 15,000 BTU 1.75 mm Medium burners 20,000 BTU 1.89 mm 0.69 mm Large burner - main Large burner - simmer 18,000 BTU 1.93 mm Grill burner Burner orifice spud Grill orifice hood A C A. Retaining clip B. Spring C. Natural gas igniter 5. Place LP gas igniter, spacer, spring, and clip in plastic parts bag for future use and keep with package containing literature. 6. Plug in igniter wire. 7. Replace the burner base using both screws. 8. Replace burner head and cap. A A. Size stamp A. Size stamp 7. Place LP gas orifice spuds in plastic parts bag for future use and keep with package containing literature. 17