KitchenAid KUBR314KSS Owners Manual - Page 12

GENERAL OPERATION, Possible Causes and/or Recommended Solutions, TEMPERATURE AND MOISTURE

Page 12 highlights

GENERAL OPERATION The motor seems to run too much Possible Causes and/or Recommended Solutions Is the control set correctly for the surrounding conditions? Refer "Controls" section. Is the door closed completely? Push the door firmly shut. If it will not shut all the way, refer "The door will not close completely" later in this section. Are the condenser coils dirty? This obstructs air transfer and makes the motor work harder. Clean the condenser coils. Refer "Cleaning" section. TEMPERATURE AND MOISTURE Temperature is too warm Possible Causes and/or Recommended Solutions Is the door opened often? Be aware that the Beverage Center will warm when this occurs. In order to keep the Beverage Center cool, try to get everything you need out of the Beverage Center at once, keep beverage contents organized so it is easy to find, and close the door as soon as the content is removed. Is the control set correctly for the surrounding conditions? Refer "Controls" section. Is the base grille blocked? For best performance, do not install the beverage center behind a cabinet door or block the base grille. There is interior moisture buildup Is the door opened often? o avoid humidity buildup, try to get everything you need out of the Beverage Center at once, keep beverage contents organized so it is easy to find, and close the door as soon as the content is removed. When the door is opened, humidity from the room air enters the Beverage Center. The more often the door is opened, the faster humidity builds up, especially when the room itself is very humid. Is it humid? It is normal for moisture to build up inside the beverage center when the air is humid. Is the control set correctly for the surrounding conditions? Refer "Controls" section. DOOR Possible Causes and/or Recommended Solutions Explosion Hazard Use nonflammable cleaner. Failure to do so can result in death, explosion, or fire. The door is difficult to open The door will not close completely Are beverage contents blocking the door open? Rearrange beverage contents so that they fit more tightly and take up less space. Are the shelves out of position? Put the shelves back into their correct positions. See "Beverage Center Use" for more information. Is the gasket dirty or sticky? Clean the gasket and the surface that it touches. Rub a thin coat of paraffin wax on the gasket following cleaning. Are the racks out of position? Put the racks back into their correct positions. Refer "Wine Racks" section for more information. Is the gasket sticking? Clean the gasket and the surface that it touches. Rub a thin coat of paraffin wax on the gasket following cleaning. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.
GENERAL OPERATION
Possible Causes and/or Recommended Solutions
The motor seems to run too much
±
Is the control set correctly for the surrounding conditions?
Refer “Controls”
section.
±
Is the door closed completely?
Push the door firmly shut. If it will not shut all the
way, refer “The door will not close completely” later in this section.
±
Are the condenser coils dirty?
This obstructs air transfer and makes the motor work
harder. Clean the condenser coils. Refer “Cleaning” section.
TEMPERATURE AND MOISTURE
Possible Causes and/or Recommended Solutions
Temperature is too warm
±
Is the door opened often?
Be aware that the Beverage Center will warm when this
occurs. In order to keep the Beverage Center cool, try to get everything you need out
of the Beverage Center at once, keep beverage contents organized so it is easy to
find, and close the door as soon as the content is removed.
±
Is the control set correctly for the surrounding conditions?
Refer “Controls”
section.
±
Is the base grille blocked?
For best performance, do not install the beverage center
behind a cabinet door or block the base grille.
There is interior moisture buildup
±
Is the door opened often?
o avoid humidity buildup, try to get everything you need
out of the Beverage Center at once, keep beverage contents organized so it is easy
to find, and close the door as soon as the content is removed. When the door is
opened, humidity from the room air enters the Beverage Center. The more often the
door is opened, the faster humidity builds up, especially when the room itself is very
humid.
±
Is it humid?
It is normal for moisture to build up inside the beverage center when the
air is humid.
±
Is the control set correctly for the surrounding conditions?
Refer “Controls”
section.
DOOR
Possible Causes and/or Recommended Solutions
±
Are beverage contents blocking the door open?
Rearrange beverage contents so
that they fit more tightly and take up less space.
±
Are the shelves out of position?
Put the shelves back into their correct positions.
See “Beverage Center Use” for more information.
±
Is the gasket dirty or sticky?
Clean the gasket and the surface that it touches. Rub
a thin coat of paraffin wax on the gasket following cleaning.
±
Are the racks out of position?
Put the racks back into their correct positions. Refer
“Wine Racks” section for more information.
±
Is the gasket sticking?
Clean the gasket and the surface that it touches. Rub a thin
coat of paraffin wax on the gasket following cleaning.
The door is difficult to open
The door will not close completely
12