KitchenAid KUBR314KSS Owners Manual - Page 9
Stocking the Beverage Center, Wine Racks
View all KitchenAid KUBR314KSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
structures, can make the sounds seem louder. The following describes the kinds of sounds and what may be making them. Your beverage center is designed to run more efficiently to keep your beverages at the desired temperatures and to minimize energy usage. The high efficiency compressor and fans may cause your beverage center to run longer than your old one. You may also hear a pulsating or high-pitched sound from the compressor or fans adjusting to optimize performance. Rattling noises may come from the flow of refrigerant or items stored inside the beverage center. As each cycle ends, you may hear a gurgling sound due to the refrigerant flowing in your beverage center. You may hear water running into the drain pan when the beverage center is defrosting. You may hear clicking sounds when the beverage center starts or stops running. Stocking the Beverage Center 1. Starting on the left-hand side, place the first bottle on the bottom of the rack with the neck of the bottle facing the front of the beverage center. 2. Place the next bottle on its side with the neck of the bottle facing the back of the beverage center. Alternate the direction of the bottles, in this manner, until the display rack is full. To stock the Beverage Center - Rack 2: 1. Starting from left-hand side of the bottom rack, place the first bottle with the neck of the bottle facing the front of the beverage center. 2. Continue to place the remaining bottles facing in the same direction. Wine Racks Remove and replace the racks: 1. Pull the rack forward until it stops. 2. Press down on the left-hand lever while lifting up on the right-hand lever to release the rack. Pull the rack forward and lift it up and out of the rack supports. 1 2 A Rack 1: For storing up to eight 750 ml wine bottles [diameter less than or equal to 31/8" (80 mm)]. Rack 2: For storing up to 6 wine bottles [diameter up to 31/8" (80 mm)]. To stock the Beverage Center Shelves: Place juices, sodas or other canned beverages on the glass shelves. To stock the Beverage Center - Rack 1: NOTE: The wine rack can be stocked with the bottles facing either direction, however, to optimize storage adjacent bottles should be facing in opposite. A. Lever 3. Replace the rack by inserting the rack into the supports and sliding it in until it locks. 9