Kodak ATS Operation Manual - Page 12
Rear-Screen Projection, With a Dissolve Control
UPC - 041771070632
View all Kodak ATS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Operation Replace the lock ring by turning it clockwise until it is secure Rear-Screen Projection You can easily adapt a show from front- to rear-screen projection. Remove each slide from the tray and turn it around (keeping the slide upside down). This will give the projected slide a mirror image on the screen. With a Dissolve Control Insert your first slide back into the first slot in the tray. The number is now visible in the inner circumference of the tray. Replace the lock ring by turning it clockwise until it is secure. When you use a dissolve control, put your slides into two trays (one for oddand one for even-numbered slides). 8 KODAK EKTAGRAPHIC III Slide Projector
8
KODAK EKTAGRAPHIC III Slide Projector
Operation
Replace the lock ring by turning it
clockwise
until it is secure
Rear-Screen
Projection
You can easily adapt a show from front- to rear-screen projection. Remove
each slide from the tray and
turn it around
(keeping the slide upside down).
This will give the projected slide a mirror image on the screen.
Insert your first slide back into the first slot in the tray. The number is now
visible in the inner circumference of the tray.
Replace the lock ring by turning it
clockwise
until it is secure.
With a Dissolve
Control
When you use a dissolve control, put your slides into two trays (one for odd-
and one for even-numbered slides).