Kodak ATS Operation Manual - Page 25
Maintenance, Projection Lamps, Lamp Tips
UPC - 041771070632
View all Kodak ATS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Maintenance To ensure a long life and trouble-free operation for your projector: • Allow the air to flow freely around the projector. • Do not recirculate warm air. • Keep the projector dust free. • If your projector is chilled, bring it to room temperature before operating. Projection Lamps Quartz-halogen 82 V projection lamps- Included: EXR, 300 W (35-hour lamp life at full lamp/medium-brightness) Sampling of other lamps: EXY (200 hours/less brightness) EXW (15 hours/maximum brightness) FHS (70 hours/medium brightness) Use combinations of lamp brightness, plus half- and full-lamp settings to approximate image brightness in multi-projector presentations. Lamp Tips Desired Brightness Maximum High Medium Low EKTAGRPAHIC III Projector Lamp EXW EXR FHS EXY • Projector operation on line voltages above 125 volts greatly reduces the lamp life. • Unplug the projector before changing the lamp. • Allow for unrestricted flow of air to the exhaust vent to prolong lamp life. • Gently wipe off any fingerprints with a soft cloth moistened with rubbing alcohol. KODAK EKTAGRAPHIC III Slide Projector 21