Kodak ATS Operation Manual - Page 32
See Clearing a Gate Jam on, PROBLEM, CAUSE, CORRECTION
UPC - 041771070632
View all Kodak ATS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Troubleshooting PROBLEM Slide fails to drop into projection position Uneven illumination on screen Projector won't cycle to next slide Program does not start with the with the correct slide CAUSE Tray base plate not properly indexed Tray not properly positioned on projector Slide mount warped or frayed at corners slide. Projector not level or tilted too high Projection lamp not fully seated Condenser lens not installed or not positioned properly in mount Slide mount not seated properly in projector gate Tray not properly positioned Slide or foreign object stuck in gate Tray number is not aligned with the with the raised index mark. CORRECTION Rotate the tray base plate until it locks into position. Reposition tray on projector. Straighten mount or remount slide. Set projector on a stand equal with center of screen. Check lamp. Check condenser lens. Check slide position and slidemount condition. Reposition tray. See "Clearing a Gate Jam" on page 18. Reposition tray (see "Tray" on page 9). 28 KODAK EKTAGRAPHIC III Slide Projector