Kodak DP1050 User Manual - Page 18
Adjusting the height and angle of, the KODAK DP1050 ULTRA - lamp
View all Kodak DP1050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Volume (+/-) The Volume key is used to control the sound level when the KODAK DP1050 ULTRA is connected to an audio source. Channel Click on the arrows left/right to switch between pre-programmed TV channels when TV is selected as source. Brightness The Brightness key is used to control the brightness in data and video image. Contrast The Contrast key is used to control the contrast in data and video image. Stand by The stand by key will set the KODAK DP1050 ULTRA in stand by mode. The lamp will turn off, and the fans will run for a little while cooling the projector before stopping. To return to normal mode, press the Stand by key once more, or press the Menu key on the remote control. Automatic set-up The automatic set-up key will set up the projector with optimal settings for the connected source. If you want to do manual adjustments you can do this by using the menus (see section 7). Note! You can not access the screen menu system without the remote control. 6.4 Adjusting the height and angle of the KODAK DP1050 ULTRA You can adjust the height and angle of the KODAK DP1050 ULTRA by adjusting the four small feet underneath the product. NOTE! The KODAK DP1050 ULTRA should never be left with an angle of more than 15 degrees over a longer period of time. This will shorten the lifetime of the lamp. 18 Contents