Kodak DP2900 User's Guide - Page 25
Heading1 - Using the Projector, Heading2 - Basic Image Adjustment
View all Kodak DP2900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Using the Projector This section describes how to use and make adjustments to the projector. It also provides a reference to the keypad and remote buttons and the options available from the on-screen menus. Basic Image Adjustment • Make sure you have turned on your equipment in the right order (page 22). • If the image doesn't display completely, zoom the image (page 26), adjust the height of the projector (page 26) or center the image by adjusting its horizontal or vertical position (page 37). Be sure the projector is at a 90 degree angle to the screen. • If the image is out of focus, rotate the focus lens (page 26). • If the image appears to shimmer or if it has blurry vertical bars after you have adjusted the focus, turn Auto Image (page 36) off and then back on to reset the automatic sync and tracking. If that doesn't clear up the image, turn Auto Image off and adjust the sync (page 37) and/or the tracking (page 37) manually. • If the colors don't look right, check the KODAK Image Manager settings. See "Using KODAK Image Manager" on page 43. Or Adjust the brightness (page 33) and the tint (page 34). • If the computer source image is not rectangular, adjust the keystoning (page 35). • If the edges of the video source image appear jagged, adjust the overscan (page 35). 25