Kodak DP2900 User's Guide - Page 8
Safety Issues, Important Operating Considerations - bulb
View all Kodak DP2900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
User Guide KODAK DP2900 Digital Projector Safety Issues • Warning: Don't look directly into the lens when the lamp is turned on. •Warning: To replace the lamp, turn the projector off by unplugging the power cord. To avoid burns, wait 30 minutes before opening the lamp door. Follow all instructions provided in this User's Guide. •Warning: Please use the power cord provided. Connect the power cord to a receptacle with a protective safety (earth) ground terminal. • Warning: Refer all service to qualified service personnel. Servicing your own projector will void the warranty. See the following page for the customer service contact information. • Caution: Don't block ventilation openings. • Caution: Don't set liquids on the projector. Spilled liquids may damage your projector. • Caution: Don't place the projector on a hot surface or in direct sunlight. • Caution: Do not drop the projector. Transport the projector in an KODAK-approved case. For accessory information go to our Web site at www.kodak.com/go/projectors. Important Operating Considerations Do not place the projector on a tablecloth or other soft covering that may block the vents. In the unlikely event of the bulb rupturing, thoroughly clean the area behind the projector and discard any edible items placed in that area. 2 ft (.6m) Do not place objects in this area behind the projector viii