Kodak M873 Getting started guide - Page 22

Solving camera problems

Page 22 highlights

3 Solving camera problems Camera problems Status Solution Camera does not turn on Camera does not turn off ■ Make sure the battery is charged and installed correctly (see page 1). ■ Turn the camera off, then on again. Camera buttons and controls do not function The battery does not charge using USB charging ■ See page 2 or visit www.kodak.com/go/USBcharging. Pictures remaining ■ Continue taking pictures. The camera is operating normally. number does not (The camera estimates the number of pictures remaining after each decrease after taking a picture is taken, based on picture size and content.) picture Flash does not fire ■ Check the flash setting, and change as needed (see page 13). NOTE: The flash does not fire in all modes. Battery life is short ■ Make sure the correct battery type is installed (see page 1). ■ Wipe the contacts with a clean, dry cloth before inserting a battery in the camera. ■ Insert a new or charged battery (see page 1). 22 www.kodak.com/go/easysharecenter

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27

22
www.kodak.com/go/easysharecenter
3
Solving camera problems
Camera problems
Status
Solution
Camera does not
turn on
Make sure the battery is charged and installed correctly (see
page 1
).
Turn the camera off, then on again.
Camera does not turn
off
Camera buttons and
controls do not function
The battery does not
charge using USB
charging
See
page 2
or visit
www.kodak.com/go/USBcharging.
Pictures remaining
number does not
decrease after taking a
picture
Continue taking pictures. The camera is operating normally.
(The camera estimates the number of pictures remaining after each
picture is taken, based on picture size and content.)
Flash does not fire
Check the flash setting, and change as needed (see
page 13
).
NOTE: The flash does not fire in all modes.
Battery life is short
Make sure the correct battery type is installed (see
page 1
).
Wipe the contacts with a clean, dry cloth before inserting a battery
in the camera.
Insert a new or charged battery (see
page 1
).