Konica Minolta bizhub 215 bizhub 215 Network Administration User Guide - Page 74
[Network] - [IPv4 Configuration
View all Konica Minolta bizhub 215 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
4.3 Administrator mode 4 Tips - To change the settings of the [Network] tab, click [Apply]. After the message [Update Successful] is displayed, in the [System] tab - [Maintenance] menu - [NIC and Printer Controller Reset], click [Reset]. Otherwise, the change in settings is not enabled. 4.3.27 [Network] - [IPv4 Configuration] Configure the IPv4 Configuration of the network. Configure the settings and click [Apply] to apply the change. Item [IP Address] [Subnet Mask] [Default Gateway] [Base Port Number] [DHCP (APIPA)] [IP Address in NVRAM] [Enable DNS Server] [DNS Server Address] Description Specify the IP address for this machine. Specify the subnet mask of the network to be connected. Specify the default gateway address of the network to be connected. Specify the port number used for RAW print. Select this item to assign an IP address automatically using the DHCP server or APIPA (Automatic Private IP Addressing). Select this item to use a fixed IP address. Select this check box to use DNS. If the [Enable DNS Server] check box is selected, specify the IP address of the DNS server. Tips - To change the settings of the [Network] tab, click [Apply]. After the message [Update Successful] is displayed, in the [System] tab - [Maintenance] menu - [NIC and Printer Controller Reset], click [Reset]. Otherwise, the change in settings is not enabled. bizhub 215 4-34