Konica Minolta bizhub 5000i bizhub 5000i/4000i User Guide
Konica Minolta bizhub 5000i Manual
View all Konica Minolta bizhub 5000i manuals
Add to My Manuals
Save this manual to your list of manuals |
Konica Minolta bizhub 5000i manual content summary:
- Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 1
User's Guide © 2019 KONICA MINOLTA, INC. All rights reserved. - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 2
)...39 Print a Document (Windows)...40 Secure Print (Windows)...41 Change the Default Print Settings (Windows 43 Print from Your Computer (Mac) ...45 Print Job...50 Test Print ...51 Network ...52 Get Started...53 Supported Basic Network Features...54 Network Management Software and Utilities 55 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 3
™ ...190 Print with Mopria™...191 Print from a Mobile Device ...192 Troubleshooting ...193 Error and Maintenance Messages ...194 Paper Jams ...201 Paper is Jammed in the 2-sided Tray 209 Printing Problems...211 Improve the Print Quality...213 Network Problems...218 Error Messages ...219 Where Can I - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 4
Home > Table of Contents Network Reset ...232 Factory Reset ...233 Routine Maintenance ...234 Replace Supplies ...235 Replace the Toner Cartridge ...237 Replace the Imaging Unit ...240 Reset the Drum Counter ...242 Clean the Machine ...243 Clean the Touchscreen LCD ...245 Clean the Corona Wire... - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 5
Home > Before You Use Your Machine Before You Use Your Machine • Applicable Models • Definitions of Notes • Trademarks • Important Note 1 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 6
Home > Before You Use Your Machine > Applicable Models Applicable Models This User's Guide applies to the following models: 1 line LCD models: bizhub 4000i 1.8 inch Touchscreen LCD models: bizhub 5000i Related Information • Before You Use Your Machine 2 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 7
> Before You Use Your Machine > Definitions of Notes Definitions of Notes We use the following symbols and conventions throughout this User's Guide: WARNING Improper handling can cause serious injury or death. CAUTION Improper handling can cause minor injury or damage to houses and property - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 8
KONICA MINOLTA, the KONICA MINOLTA logo, Giving Shape to Ideas, PageScope, and bizhub are registered trademarks or trademarks of KONICA MINOLTA, other countries. Each company whose software title is mentioned in this manual has a Software License Agreement specific to its proprietary programs. All - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 9
10 Enterprise. • Windows Server 2008 in this document represents Windows Server 2008 and Windows Server 2008 R2. • Unless otherwise specified, the screens in this manual are from Windows 7 and macOS v10.12.x Screens on your computer may vary depending on your operating system. • The contents of this - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 10
Home > Introduction to Your Machine Introduction to Your Machine • Before Using Your Machine • Front View and Back View • Control Panel Overview • Touchscreen LCD Overview • How to Navigate the Touchscreen LCD 6 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 11
, confirm the following: • Make sure you have installed the printer driver. • For USB or network cable users: Make sure the interface cable settings. If you are using the Windows Firewall and you installed the printer driver from the CD-ROM, the necessary firewall settings have already been set. If - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 12
Your Machine > Front View and Back View Front View and Back View >> bizhub 4000i >> bizhub 5000i bizhub 4000i Front View 12 7 3 4 6 5 Back View 8 10 9 8 12 9 11 1. Face down output tray support flap (support flap) 2. Face down output tray 3. Front cover release button 4. Front cover - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 13
bizhub 5000i Front View 12 7 3 4 6 5 Back View 8 13 9 12 10 11 1. Face down output tray support flap (support flap) 2. Face down output tray 3. Front cover release button 4. Front cover 5. Paper tray 6. Multi-purpose tray (MP tray) 7. Touch panel with a tiltable touchscreen LCD 8. - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 14
Home > Introduction to Your Machine > Control Panel Overview Control Panel Overview The control panel may vary depending on your model. >> bizhub 4000i >> bizhub 5000i bizhub 4000i 1. Liquid Crystal Display (LCD) Displays messages to help you set up and use the machine. Wireless Network Models A - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 15
you enter your four-digit password. 6. Go • Press to clear certain error messages. To clear all other errors, follow the LCD instructions. • Press to print any process of connecting to a wireless access point. bizhub 5000i 1. Touchscreen Liquid Crystal Display (LCD) Access menus and options by - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 16
2. Power On/Off • Turn on the machine by pressing . • Turn off the machine by pressing and holding down seconds before going off. 3. Touchpanel . The LCD displays [Shutting Down] for a few (Back) Press to go back to the previous menu. (Home) Press to return to the Home screen. (Cancel) • - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 17
Home > Introduction to Your Machine > Touchscreen LCD Overview Touchscreen LCD Overview Related Models: bizhub 5000i From the Home screen, you can access the Wi‑Fi setup, Toner level, Settings, and Functions screen. The Home screen displays the machine's status when the machine is idle. This screen - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 18
Warning icon The warning icon appears when there is an error or maintenance message; press then press to return to Ready Mode. Related Information • Introduction to Your Machine to view it, and 14 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 19
Home > Introduction to Your Machine > How to Navigate the Touchscreen LCD How to Navigate the Touchscreen LCD Related Models: bizhub 5000i Press your finger on the LCD to operate it. To display and access all the options, press a or b on the touchpanel to scroll through them. - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 20
Panel Control LCD Seƫngs 5. Press [Backlight]. LCD Seƫngs Backlight Dim Timer Light Off 6. Press a or b to display the [Med] option, and then press [Med]. Backlight Light Med 7. Press . Related Information • Introduction to Your Machine 16 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 21
Home > Paper Handling Paper Handling • Load Paper • Paper Settings • Unprintable Area • Using Special Paper 17 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 22
Home > Paper Handling > Load Paper Load Paper • Load and Print Using the Paper Tray • Load and Print Using the Multi‑purpose Tray (MP Tray) 18 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 23
Print Plain Paper, Letterhead, Colored Paper, Thin Paper and Recycled Paper Using the Paper Tray • Load and Print Thick Paper Using the Paper Tray • Printing Problems • Error and Maintenance Messages 19 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 24
size and paper type. Change the paper size and paper type settings if needed, following the LCD instructions. • When you load a different size and type of paper in the tray, you must of the machine. 2. Press and slide the paper guides to fit the paper. Press the release levers to slide the paper - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 25
For Legal or Folio size paper, press the release button (1) in the bottom of the paper tray or the release lever (2) in the back of the tray, and then pull out the back of the paper tray. (Legal and Folio size paper are not available in some regions.) For trays with a release button: 1 For trays - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 26
Feed]. - (bizhub 5000i) Press [Settings] > [Paper Tray] > [2-sided] > [Single Image] > [2-sided Feed]. 5. Make sure the paper is below the maximum paper mark (b b b). Overfilling the paper tray will cause paper jams. 6. Slowly push the paper tray completely into the machine. 7. Lift the support flap - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 27
size and paper type. Change the paper size and paper type settings if needed, following the LCD instructions. • When you load a different size and type of paper in the tray, you must of the machine. 2. Press and slide the paper guides to fit the paper. Press the release levers to slide the paper - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 28
For Legal or Folio size paper, press the release button (1) in the bottom of the paper tray or the release lever (2) in the back of the tray, and then pull out the back of the paper tray. (Legal and Folio size paper are not available in some regions.) For trays with a release button: 1 For trays - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 29
8. Open the paper stopper (Available only for bizhub 5000i). 9. Send your print job to the machine. Change your print preferences in the Print dialog box before sending the print job from your computer. 10. - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 30
in the MP Tray • Load and Print Thick Paper and Labels Using the MP Tray • Load and Print on Envelopes Using the MP Tray • Printing Problems • Error and Maintenance Messages 26 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 31
Type settings in the machine or on your computer, also. 1. Lift the support flap to prevent paper from sliding off the face down output tray. 2. MP tray support (1) and unfold the flap (2). 2 1 4. Slide the MP tray paper guides to fit the width of the paper you are using. If the paper guide on the - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 32
paper for 2-sided printing, change the machine's setting by completing the following step: • (bizhub 4000i) Press [Paper Tray] > [2-sided] > [Single Image] > [2-sided Feed]. • (bizhub 5000i) Press [Settings] > [Paper Tray] > [2-sided] > [Single Image] > [2-sided Feed]. 6. Send your print job - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 33
face up output tray). 2. Open the paper stopper (Available only for bizhub 5000i). 3. On the front of the machine, open the MP tray and lower it gently. 4. Pull out the MP tray support (1) and unfold the flap (2). 2 1 5. Slide the MP tray paper guides to fit the width of the paper that you are using - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 34
6. Load paper or labels in the MP tray. 1 • Make sure the paper is below the maximum paper mark (1). • Load paper into the MP tray with the printing surface face up. 7. Send your print job to the machine. Change your print preferences in the Print screen before sending the print job from your - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 35
up output tray). 2. Open the paper stopper (Available only for bizhub 5000i). 3. On the front of the machine, open the MP tray and lower it gently. 4. Pull out the MP tray support (1) and unfold the flap (2). 2 1 5. Slide the MP tray paper guides to fit the width of the envelopes that you are using - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 36
6. Load envelopes in the MP tray. 1 Load up to 10 envelopes in the MP tray with the printing surface face up. Make sure the envelopes are below the maximum paper mark (1). Loading more than 10 envelopes may cause paper jams. 7. Send your print job to the machine. Change your print preferences in - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 37
Home > Paper Handling > Paper Settings Paper Settings • Change the Paper Size and Paper Type • Change the Check Paper Size Setting 33 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 38
of the paper you load in the tray, you must change the Paper Size and Paper Type settings on the LCD at the same time. >> bizhub 4000i >> bizhub 5000i bizhub 4000i 1. Press a or b to select the [Paper Tray] option, and then press OK. 2. Press a or b to select the [Paper Type] option, and then press - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 39
remove a paper tray or load paper using the MP tray, asking if you changed the paper size and paper type. The default setting is On. >> bizhub 4000i >> bizhub 5000i bizhub 4000i 1. Press a or b to select the [Paper Tray] option, and then press OK. 2. Press a or b to select the [Check Size] option - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 40
Home > Paper Handling > Unprintable Area Unprintable Area The figures below show maximum unprintable areas from the edges of the most commonly-used paper sizes. The measurements may vary depending on the paper size or settings in the application you are using. 1 2 4 3 Do not attempt to print into - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 41
• that is damaged, creased or folded • that exceeds the recommended weight specification in this guide • with tabs and staples • with letterheads using low temperature dyes or thermography • that is damage is not covered under any warranty or service agreement. Related Information • Paper Handling 37 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 42
Home > Print Print • Print from Your Computer (Windows) • Print from Your Computer (Mac) • Cancel a Print Job • Test Print 38 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 43
Home > Print > Print from Your Computer (Windows) Print from Your Computer (Windows) • Print a Document (Windows) • Secure Print (Windows) • Change the Default Print Settings (Windows) 39 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 44
you are trying to print, open the Print dialog. 2. If necessary, adjust the settings. 3. Print the document. For details of the function of the printer driver, refer to the Help of the printer driver. Related Information • Print from Your Computer (Windows) 40 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 45
do not print until you enter a password on the machine's control panel. • The secure data is deleted from the machine when you turn off the machine. >> bizhub 4000i >> bizhub 5000i bizhub 4000i 1. Select the print command in your application. 2. Select KONICA MINOLTA XXXX (where XXXX is the name of - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 46
jobs for that name. 11. Press a or b to display the print job you want to print, and then press it. 12. Enter your four-digit password, and then press [OK]. 13. Enter the number of copies you want. 14. Press [Start]. The machine prints the data. After you print the secured - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 47
of your Windows programs, all the time, use these steps to change the default print settings. 1. Do one of the following: • (For Windows Server KONICA MINOLTA XXXX icon (where XXXX is your model name), and then select Printer properties. If printer driver options appear, select your printer driver - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 48
Hardware group, click View devices and printers. 2. Right-click the KONICA MINOLTA XXXX icon (where XXXX is your model name), and then select Printer properties. If printer driver options appear, select your printer driver. 3. Select the Configure tab. 4. Click the Acquire Device Information button - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 49
Home > Print > Print from Your Computer (Mac) Print from Your Computer (Mac) • Print a Document (Mac) • Secure Print (Mac) • Configure the Optional Tray Settings (Mac) 45 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 50
loaded the correct size paper in the paper tray. 2. From an application, such as Apple TextEdit, click the File menu, and then select Print. 3. Select KONICA MINOLTA XXXX (where XXXX is your model name). 4. Type the number of copies you want in the Copies field. 5. Click the Paper Size pop-up menu - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 51
enter a password on the machine's control panel. • The secure data is deleted from the machine when you turn off the machine. >> bizhub 4000i >> bizhub 5000i bizhub 4000i 1. From an application, such as Apple TextEdit, click the File menu, and then select Print. 2. Select KONICA MINOLTA XXXX (where - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 52
12. Press a or b to display the print job you want to print, and then press it. 13. Enter your four-digit password, and then press [OK]. 14. Enter the number of copies you want. 15. Press [Start]. The machine prints the data. After you print the secured - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 53
Home > Print > Print from Your Computer (Mac) > Configure the Optional Tray Settings (Mac) Configure the Optional Tray Settings (Mac) 1. From System Preferences in the Apple menu, navigate to your printer, and then select Options & Supplies. 2. Navigate to the list of hardware options, and then add - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 54
a Print Job >> bizhub 4000i >> bizhub 5000i bizhub 4000i 1. Press Cancel. To cancel multiple print jobs, press and hold Cancel for four seconds. bizhub 5000i 1. Press . To cancel multiple print jobs, press and hold for four seconds. Related Information • Print Related Topics: • Printing Problems 50 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 55
Home > Print > Test Print Test Print If there are problems with print quality, follow these instructions to do a test print. >> bizhub 4000i >> bizhub 5000i bizhub 4000i 1. Press a or b to display the [Machine Info.] option, and then press OK. 2. Press a or b to display the [Test Print] option, and - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 56
Home > Network Network • Get Started • Network Management Software and Utilities • Additional Methods of Configuring Your Machine for a Wireless Network • Advanced Network Features • Technical Information for Advanced Users 52 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 57
. This section provides more information about network connection types, introduces various methods to manage your network and explains some useful network features of your machine. • Supported Basic Network Features 53 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 58
various features depending on the operating system. Use this table to see which network features and connections are supported by each operating system. Operating Systems Windows 7 Windows 8.1 Windows 10 Printing Yes Web Based Management Yes Windows Server 2008/2012/ 2012 R2/2016/2019 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 59
Home > Network > Network Management Software and Utilities Network Management Software and Utilities Configure and change your machine's network settings using a management utility. • Learn about Network Management Software and Utilities • Change Machine Settings from Your Computer • Change Machine - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 60
Home > Network > Network Management Software and Utilities > Learn about Network Management Software and Utilities Learn about Network Management Software and Utilities Web Based Management Web Based Management is a utility that uses a standard web browser to manage your machine using the Hyper Text - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 61
Home > Network > Additional Methods of Configuring Your Machine for a Wireless Network Additional Methods of Configuring Your Machine for a Wireless Network To connect your machine to your wireless network, we recommend using the Utilities CD. • Before Configuring Your Machine for a Wireless Network - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 62
must know your Network name (SSID) and Network Key. If you are using an enterprise wireless network, you must know the User ID and Password. If you do not know the security information, please consult the router manufacture, your system administrator, or your Internet provider. • To achieve optimum - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 63
, click Yes. 3. Choose Wireless Network Connection (Wi-Fi), and then click Next. 4. Follow the on-screen instructions. After you have completed the wireless setup, the installer program walks you through installing the drivers. Click Next in the installation dialog box and follow the on-screen - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 64
WPS from your machine's control panel menu to configure your wireless network settings. Routers or access points that support WPS are marked with this symbol: >> bizhub 4000i >> bizhub 5000i bizhub 4000i 1. Press a or b to select the [Network] option, and then press OK. 2. Press a or b to select the - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 65
Wi-Fi Protected Setup™ (WPS) If your wireless LAN access point/router supports WPS, you can use the Personal Identification Number (PIN) Method to . For more information on how to access WPS mode, see the instructions provided with your wireless access point/router. Type A Connection when the - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 66
2 Routers or access points that support WPS are marked with this symbol: >> bizhub 4000i >> bizhub 5000i bizhub 4000i 1. Press a or b to select the [ WPS settings page and type the PIN, and then follow the on-screen instructions. • The Registrar is usually the wireless LAN access point/router. • - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 67
on-screen instructions. 9. Select your machine and click Next. 10. Type the PIN displayed on the machine's LCD, and then click Next. 11. Select your network, and then click Next. 12. Click Close. If your wireless device is connected successfully, the machine's LCD displays [Connected]. bizhub 5000i - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 68
8. Type the PIN displayed on the machine's LCD, and then click Next. 9. Select your network, and then click Next. 10. Click Close. If your wireless device is connected successfully, the machine's LCD displays [Connected]. Related Information • Additional Methods of Configuring Your Machine for a - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 69
Home > Network > Additional Methods of Configuring Your Machine for a Wireless Network > Configure Your Machine for a Wireless Network in Ad-Hoc Mode (For IEEE 802.11b/g/n) Configure Your Machine for a Wireless Network in Ad-Hoc Mode (For IEEE 802.11b/g/n) • Configure Your Machine for a Wireless - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 70
supports the use of the first WEP key only. 10. To apply the settings, press a. To cancel, press b. 11. The machine will attempt to connect to the wireless device you have selected. If your wireless device is connected successfully, the machine's LCD displays [Connected]. bizhub 5000i 1. Press - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 71
Related Information • Configure Your Machine for a Wireless Network in Ad-Hoc Mode (For IEEE 802.11b/g/n) Related Topics: • How to Enter Text on Your Machine • Wireless LAN Report Error Codes 67 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 72
has a configured SSID, use these instructions. >> bizhub 4000i >> bizhub 5000i bizhub 4000i Before configuring your machine, we recommend Encryption Mode NONE WEP Encryption Mode WEP Network Key - Network Key 12345 Your machine supports the use of the first WEP key only. 2. Press a or b to select - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 73
LCD displays [Connected]. bizhub 5000i Before configuring your machine, your computer in Ad-Hoc mode, see the instructions included with your computer or contact your network administrator. , press [Yes]. To cancel, press [No]. • Your machine supports the use of the first WEP key only. 5. The machine attempts - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 74
the Machine's Control Panel Setup Wizard >> bizhub 4000i >> bizhub 5000i bizhub 4000i Before configuring your machine, we recommend writing HELLO Network Key 12345 • Your access point/router may support the use of multiple WEP keys, however your machine supports the use of the first WEP key only. • - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 75
is connected successfully, the machine's LCD displays [Connected]. bizhub 5000i Before configuring your machine, we recommend writing down your Network Key 12345 • Your access point/router may support the use of multiple WEP keys, however your machine supports the use of the first WEP key only. • - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 76
Related Information • Additional Methods of Configuring Your Machine for a Wireless Network Related Topics: • How to Enter Text on Your Machine • Wireless LAN Report Error Codes 72 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 77
Network When the SSID Is Not Broadcast >> bizhub 4000i >> bizhub 5000i bizhub 4000i Before configuring your machine, we recommend writing your router uses WEP encryption, enter the key used as the first WEP key. Your machine supports the use of the first WEP key only. 2. Press a or b to select the [ - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 78
machine supports the use of the first WEP key only. 11. To apply the settings, press a. To cancel, press b. 12. The machine will attempt to connect to the wireless device you have selected. If your wireless device is connected successfully, the machine's LCD displays [Connected]. bizhub 5000i Before - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 79
selected the [WPA/WPA2-PSK] option, press either [TKIP+AES] or [AES] for Encryption Type. Enter the WPA key, and then press [OK]. • Your machine supports the use of the first WEP key only. 11. To apply the settings, press [Yes]. To cancel, press [No]. 12. The machine will attempt to - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 80
Wireless Network Configure Your Machine for an Enterprise Wireless Network >> bizhub 4000i >> bizhub 5000i bizhub 4000i Before configuring your machine, we recommend writing down your wireless Method EAP-FAST/MSCHAPv2 Encryption Mode User ID AES User001 Password Password 12345678 76 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 81
then press OK. 10. Do one of the following: • If you selected the [LEAP] option, enter the user ID, and then press OK. Enter the Password, and then press OK. • If you selected the [EAP-FAST], [PEAP] or [EAP-TTLS] option, press a or b to select the Inner Authentication Method [NONE], [CHAP - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 82
bizhub 5000i Before configuring your machine, we recommend writing down your wireless network settings. You will need this information HELLO User ID Communication Mode Infrastructure Authentication Method EAP-FAST/MSCHOPv2 Encryption Mode User ID AES User001 Password Password 12345678 78 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 83
Method you want. 10. Do one of the following: • If you selected the [LEAP] option, enter the user ID, and then press [OK]. Enter the Password, and then press [OK]. • If you selected the [EAP-FAST], [PEAP] or [EAP-TTLS] option, press a or b to select the Inner Authentication Method [NONE], [CHAP - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 84
Related Topics: • Wireless LAN Report Error Codes 80 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 85
Home > Network > Additional Methods of Configuring Your Machine for a Wireless Network > Use Wi-Fi Direct® Use Wi-Fi Direct® • Print from Your Mobile Device Using Wi-Fi Direct • Configure Your Wi-Fi Direct Network • I Cannot Complete the Wireless Network Setup Configuration 81 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 86
-push or PIN Method of Wi-Fi Protected Setup™ (WPS). You can also configure a wireless network by manually setting an SSID and password. Your machine's Wi-Fi Direct feature supports WPA2™ security with AES encryption. 1 2 1. Mobile device 2. Your machine • Although your machine can be used in both - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 87
the PIN Method • Configure Your Wi-Fi Direct Network Using the PIN Method of Wi-Fi Protected Setup™ (WPS) • Configure Your Wi-Fi Direct Network Manually 83 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 88
Network Configuration Overview The following instructions offer five methods for configuring your Wi-Fi Direct Network Manually. 4. Does your mobile device support one-push configuration for Wi-Fi Protected Setup™ (WPS). To use Konica Minolta Mobile Print functionality in a Wi-Fi Direct network - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 89
-Fi Direct Network Using the One-Push Method Configure Your Wi-Fi Direct Network Using the One-Push Method >> bizhub 4000i >> bizhub 5000i bizhub 4000i If your mobile device supports Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct network: 1. Press a or b to select the [Network] option - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 90
™ (WPS) Configure Your Wi-Fi Direct Network Using the One-Push Method and Wi-Fi Protected Setup™ (WPS) >> bizhub 4000i >> bizhub 5000i bizhub 4000i If your mobile device supports WPS (PBC; Push Button Configuration), follow these steps to configure a Wi-Fi Direct network: 1. Press a or b to select - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 91
> Configure Your Wi-Fi Direct Network Using the PIN Method Configure Your Wi-Fi Direct Network Using the PIN Method >> bizhub 4000i >> bizhub 5000i bizhub 4000i If your mobile device supports the PIN Method of Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct network: 1. Press a or b to - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 92
• When your machine is not the G/O, it will display available device names with which to configure a Wi-Fi Direct network. Select the mobile device to which you want to connect and press [OK]. Search for available devices again by pressing [Rescan], and then go to the next step. 5. Do one of the - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 93
Protected Setup™ (WPS) Configure Your Wi-Fi Direct Network Using the PIN Method of Wi-Fi Protected Setup™ (WPS) >> bizhub 4000i >> bizhub 5000i bizhub 4000i If your mobile device supports the PIN Method of Wi-Fi Protected Setup™ (WPS), follow these steps to configure a Wi-Fi Direct network. 1. Press - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 94
Related Topics: • Wi-Fi Direct Network Configuration Overview 90 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 95
then enter the password. 6. If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed the Wi-Fi Direct network setup. bizhub 5000i If your mobile device does not support Wi-Fi Direct or WPS, you must configure a Wi-Fi Direct network manually. 1. Press - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 96
Home > Network > Advanced Network Features Advanced Network Features • Print the Network Configuration Report • Print the WLAN Report • Configure the SNTP Protocol Using Web Based Management 92 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 97
Name appears on the current Network Configuration Report. The default Node Name is "KMNxxxxxxxxxxxx" for a wired network or .0 - Node name: KMN000ca0000499 - MAC Address: 00-0c-a0-00-04-99 >> bizhub 4000i >> bizhub 5000i bizhub 4000i 1. Press a or b to select the [Machine Info.] option, and then - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 98
The WLAN Report reflects your machine's wireless status. If the wireless connection fails, check the error code on the printed report. >> bizhub 4000i >> bizhub 5000i bizhub 4000i 1. Press a or b to select the [Machine Info.] option, and then press OK. 2. Press a or b to select the [Print WLANReport - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 99
instructions in the table: Error Code TS-01 TS-02 TS-03 Problem point/router may be used as the default security settings. b. See the documentation manually enter the SSID name. • The Network key may also be described as the Password, Security Key or Encryption Key. This device does not support - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 100
Error Code TS-04 TS-05 TS-06 TS-07 TS-08 Problem and Recommended Solutions The Authentication/Encryption methods used by the selected wireless access point/router are not supported by your machine. For infrastructure mode, change the authentication and encryption methods of the wireless access - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 101
, and then click . The default password is initpass. 4. Click the Network tab. 5. Click Protocol in the left navigation bar. 6. Select the SNTP check box to activate the settings. 7. Next to the SNTP check box, click Advanced Settings and follow the instructions below: Option Status Synchronization - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 102
Option Secondary SNTP Server Address Description The secondary SNTP server address is used as a backup to the primary SNTP server address. If the primary server is unavailable, the machine will contact the secondary SNTP server. Primary SNTP Server Port Secondary SNTP Server Port Type the port - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 103
Home > Network > Technical Information for Advanced Users Technical Information for Advanced Users • Gigabit Ethernet (Wired Network Only) • Reset the Network Settings to the Factory Settings 99 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 104
Home > Network > Technical Information for Advanced Users > Gigabit Ethernet (Wired Network Only) Gigabit Ethernet (Wired Network Only) Your machine supports 1000BASE-T Gigabit Ethernet. To connect to a 1000BASE-T Gigabit Ethernet Network, you must set the machine's Ethernet link mode to Auto from - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 105
's address bar (where "machine's IP address" is the machine's IP address). For example: http://192.168.1.2 3. Type a password if you have set one, and then click . The default password is initpass. 4. Click the Network tab. 5. Click Wired. 6. Click Ethernet in the left navigation bar. 7. Select Auto - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 106
all information, such as the password and IP address. • This feature restores all wired and wireless network settings to the factory settings. • You can also reset the print server to its factory settings using Web Based Management. >> bizhub 4000i >> bizhub 5000i bizhub 4000i 1. Press a or b to - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 107
Home > Security Security • Lock the Machine Settings • Network Security Features 103 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 108
> Lock the Machine Settings Lock the Machine Settings Before turning on the machine's Access Lock, make a careful note of your password. If you forget the password, you must reset all passwords stored in the machine by contacting your administrator or customer support. • About Using Setting Lock 104 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 109
Lock feature to block unauthorized access to machine settings. When Setting Lock is set to [On], you cannot access the machine settings without entering the password. • Set the Setting Lock Password • Change the Setting Lock Password • Turn On Setting Lock 105 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 110
Home > Security > Lock the Machine Settings > About Using Setting Lock > Set the Setting Lock Password Set the Setting Lock Password >> bizhub 4000i >> bizhub 5000i bizhub 4000i 1. Press a or b to display the [General Setup] option, and then press OK. 2. Press a or b to display the [Setting Lock] - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 111
Home > Security > Lock the Machine Settings > About Using Setting Lock > Change the Setting Lock Password Change the Setting Lock Password >> bizhub 4000i >> bizhub 5000i bizhub 4000i 1. Press a or b to display the [General Setup] option, and then press OK. 2. Press a or b to display the [Setting - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 112
select [Yes] when the LCD displays [Unlock?], enter the current four-digit password, and then press OK. bizhub 5000i 1. Press [Settings] > [General Setup] > [Setting Lock] > [Lock Off⇒On]. 2. Enter the current four-digit password. 3. Press [OK]. To turn [Off] Setting Lock, press [OK]. on the LCD - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 113
Home > Security > Network Security Features Network Security Features • Before Using Network Security Features • Secure Function Lock 3.0 • Use Active Directory Authentication • Use LDAP Authentication • Manage Your Network Machine Securely Using SSL/TLS • Manage Your Network Machine Securely Using - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 114
Home > Security > Network Security Features > Before Using Network Security Features Before Using Network Security Features Your machine employs some of the latest network security and encryption protocols available today. These network features can be integrated into your overall network security - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 115
Home > Security > Network Security Features > Secure Function Lock 3.0 Secure Function Lock 3.0 Secure Function Lock 3.0 increases security by restricting the functions available on your machine. • Before Using Secure Function Lock 3.0 • Configure Secure Function Lock 3.0 Using Web Based Management - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 116
Google Cloud Print™ and iPrint&Scan for Mac. If you register users' login names in advance, the users will not need to enter their passwords when they use the print function. • Page Limits • Page Counters • Card ID (supported models only) If you register users' Card IDs in advance, a registered user - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 117
List field, type the user name. 14. In the PIN Number field, type a four-digit password. 15. To register the user's Card ID, type the card number in the Card ID field (Available only for bizhub 5000i). 16. Click the Output drop-down list, and then select the output tray for each user - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 118
Secure Function Lock screen to set up Public Mode, which limits the functions available to public users. Public users will not need to enter a password to access the features made available through Public Mode settings. Public Mode includes print jobs sent via Google Cloud Print™ and iPrint&Scan for - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 119
to CSV file Click Export to CSV file, to export the current page counter including User List / Restricted Functions information as a CSV file. Card ID (supported models only) Click the User List menu, and then type a users' Card ID in the Card ID field. You can use your ID card for - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 120
's Control Panel Related Models: bizhub 5000i 1. Touch the ID card logo on the machine's control panel with a registered ID Card. 2. Press [Register Card]. 3. Touch a new ID Card to the ID card logo. The new ID Card's number is registered to the machine. For the supported - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 121
Home > Security > Network Security Features > Use Active Directory Authentication Use Active Directory Authentication • Introduction to Active Directory Authentication • Configure Active Directory Authentication Using Web Based Management • Log On to Change the Machine Settings Using the Machine's - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 122
Authentication Related Models: bizhub 5000i Active Directory Authentication restricts the use of your machine. If Active Directory Authentication is enabled, the machine's control panel will be locked. You cannot change the machine's settings until you enter a User ID and password. Active Directory - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 123
Based Management Related Models: bizhub 5000i Active Directory authentication supports Kerberos authentication and NTLMv2 be printed automatically. This feature is available only for print data created by your printer driver. Select this option to save your User ID. Type the IP address or the - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 124
Related Models: bizhub 5000i When Active Directory Authentication is enabled, the machine's control panel will be locked until you enter your User ID and password on the machine's control panel. 1. On the machine's control panel, enter your User ID. 2. Press [Login]. 3. Enter your password. 4. Press - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 125
Home > Security > Network Security Features > Use LDAP Authentication Use LDAP Authentication • Introduction to LDAP Authentication • Configure LDAP Authentication Using Web Based Management • Log On to Change the Machine Settings Using the Machine's Control Panel (LDAP Authentication) 121 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 126
to LDAP Authentication Related Models: bizhub 5000i LDAP Authentication restricts the use of your machine. If LDAP Authentication is enabled, the machine's control panel will be locked. You cannot change the machine's settings until you enter a User ID and password. LDAP Authentication offers the - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 127
Configure LDAP Authentication Using Web Based Management Related Models: bizhub 5000i 1. Start your web browser. 2. Type "http://machine automatically. This feature is available only for print data created by your printer driver. Remember User ID Select this option to save your User ID. LDAP - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 128
) Related Models: bizhub 5000i When LDAP Authentication is enabled, the machine's control panel will be locked until you enter your User ID and password on the machine's control panel. 1. On the machine's control panel, enter your User ID and Password. 2. Press [Login]. 3. When authentication - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 129
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/TLS Manage Your Network Machine Securely Using SSL/TLS • Introduction to SSL/TLS • Certificates and Web Based Management • Manage Your Network Machine Securely Using Web Based Management • Print Documents - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 130
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Introduction to SSL/TLS Introduction to SSL/TLS Secure Socket Layer (SSL) or Transport Layer Security (TLS) is an effective method of protecting data sent over a local or wide area network (LAN or WAN - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 131
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Introduction to SSL/TLS > Brief History of SSL/TLS Brief History of SSL/TLS SSL/TLS was originally created to secure web traffic information, particularly data sent between web browsers and servers. - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 132
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Introduction to SSL/TLS > Benefits of Using SSL/TLS Benefits of Using SSL/TLS The primary benefit of using SSL/TLS on your machines is to guarantee secure printing over an IP network by restricting - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 133
and Web Based Management You must configure a certificate to manage your machine securely using SSL/TLS. You must use Web Based Management to configure a certificate. • Supported Security Certificate Features • Create and Install a Certificate • Manage Multiple Certificates 129 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 134
for SMTP • IEEE 802.1x authentication • IPsec This machine supports the following: • Pre-installed certificate Your machine has a pre system administrator first. • When you reset the print server back to its default factory settings, the certificate and the private key that are installed will be - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 135
Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate Create and Install a Certificate • Step by Step Guide for Creating and Installing a Certificate • Create and Install a Self-signed Certificate • Create and Install a Certificate from a Certificate Authority (CA - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 136
Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Step by Step Guide for Creating and Installing a Certificate Step by Step Guide for Creating and Installing a Certificate There are two options when choosing a security certificate: use a self-signed - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 137
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Selfsigned Certificate Create and Install a Self-signed Certificate • Create a Self-signed Certificate • - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 138
For example: http://KMNxxxxxxxxxxxx The NetBIOS name can be found in the Network Configuration Report. 3. Type a password if you have set one, and then click . The default password is initpass. 4. Click the Network tab. 5. Click Security. 6. Click Certificate. 7. Click Create Self-Signed Certificate - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 139
17. Click Yes to restart your print server. The self-signed certificate is created and saved in your machine's memory. To use SSL/TLS comunication, the self-signed certificate must be installed on your computer. Related Information • Create and Install a Self-signed Certificate 135 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 140
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Selfsigned Certificate > Install the Self-signed Certificate for Windows users with Administrator Rights - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 141
4. Click Continue to this website (not recommended). 5. Click Certificate Error, and then click View certificates. 6. Click Install Certificate.... 137 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 142
7. When the Certificate Import Wizard appears, click Next. 8. Select Place all certificates in the following store, and then click Browse.... 9. Select Trusted Root Certification Authorities, and then click OK. 10. Click Next. 138 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 143
11. Click Finish. 12. Click Yes, if the fingerprint (thumbprint) is correct. The fingerprint (thumbprint) is printed on the Network Configuration Report. 13. Click OK. The self-signed certificate is now installed on your computer, and SSL/TLS communication is available. Related Information • Create - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 144
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Selfsigned Certificate > Import and Export the Self-signed Certificate on your Machine Import and Export - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 145
For example: http://KMNxxxxxxxxxxxx The NetBIOS name can be found in the Network Configuration Report. 3. Type a password if you have set one, and then click . The default password is initpass. 4. Click the Network tab. 5. Click Security. 6. Click Certificate. 7. Click Import Certificate and Private - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 146
. - For example: http://KMNxxxxxxxxxxxx The NetBIOS name can be found in the Network Configuration Report. 3. Type a password if you have set one, and then click . The default password is initpass. 4. Click the Network tab. 5. Click Security. 6. Click Certificate. 7. Click Export. 8. If you want to - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 147
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Certificate from a Certificate Authority (CA) Create and Install a Certificate from a Certificate - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 148
in the Network Configuration Report. 3. Type a password if you have set one, and then click . The default password is initpass. 4. Click the Network tab. 5. Auto (Register IPv4) or Manual. 9. Select your setting from the Public Key Algorithm drop-down list. The default setting is RSA(2048bit). 10 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 149
• Follow your CA's policy regarding the method to send a CSR to your CA. • If you are using the Enterprise root CA of Windows Server 2008/2012/2012 R2/2016/2019, we recommend using the Web Server for the certificate template to securely create the Client Certificate. If you are creating a Client - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 150
example: http://KMNxxxxxxxxxxxx The NetBIOS name can be found in the Network Configuration Report. 3. Type a password if you have set one, and then click . The default password is initpass. 4. Click the Network tab. 5. Click Security. 6. Click Certificate. 7. Click Install Certificate. 8. Browse to - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 151
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Certificate from a Certificate Authority (CA) > Import and Export the Certificate and Private Key Import - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 152
For example: http://KMNxxxxxxxxxxxx The NetBIOS name can be found in the Network Configuration Report. 3. Type a password if you have set one, and then click . The default password is initpass. 4. Click the Network tab. 5. Click Security. 6. Click Certificate. 7. Click Import Certificate and Private - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 153
For example: http://KMNxxxxxxxxxxxx The NetBIOS name can be found in the Network Configuration Report. 3. Type a password if you have set one, and then click . The default password is initpass. 4. Click the Network tab. 5. Click Security. 6. Click Certificate. 7. Click Export shown with Certificate - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 154
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Import and Export a CA Certificate Import and Export a CA Certificate You can import, export and store CA certificates on - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 155
- For example: http://KMNxxxxxxxxxxxx The NetBIOS name can be found in the Network Configuration Report. 3. Type a password if you have set one, and then click . The default password is initpass. 4. Click the Network tab. 5. Click Security. 6. Click CA Certificate. 7. Click Import CA Certificate and - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 156
- For example: http://KMNxxxxxxxxxxxx The NetBIOS name can be found in the Network Configuration Report. 3. Type a password if you have set one, and then click . The default password is initpass. 4. Click the Network tab. 5. Click Security. 6. Click CA Certificate. 7. Select the certificate you want - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 157
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Manage Multiple Certificates Manage Multiple Certificates The multiple certificate feature allows you to use Web Based Management to manage each certificate - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 158
Name that you assigned to the certificate; this could be your IP address, node name, or domain name). 3. Type a password if you have set one, and then click . The default password is initpass. 4. You can now access the machine using HTTPS. • If you use the SNMPv3 protocol, follow the steps below - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 159
In this mode, the print server uses version 1 and version 2c of the SNMP protocol. You can use all applications in this mode. However, it is not secure since it will not authenticate the user, and data will not be encrypted. • SNMPv3 read-write access and v1/v2c read-only access In this mode, the - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 160
node name. - For example: http://KMNxxxxxxxxxxxx The NetBIOS name can be found in the Network Configuration Report. 3. Type a password if you have set one, and then click . The default password is initpass. 4. Click the Network tab. 5. Click Protocol. Make sure the IPP check box is selected. If the - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 161
Home > Security > Network Security Features > Manage Your Network Machine Securely Using IPsec Manage Your Network Machine Securely Using IPsec • Introduction to IPsec • Configure IPsec Using Web Based Management • Configure an IPsec Address Template Using Web Based Management • Configure an IPsec - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 162
at the network layer, applications that employ a higher-level protocol use IPsec even if the user is not aware of its use. IPsec supports the following functions: • IPsec transmissions According to the IPsec setting conditions, the network-connected computer sends data to and receives data from the - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 163
's address bar (where "machine's IP address" is the machine's IP address). For example: http://192.168.1.2 3. Type a password if you have set one, and then click . The default password is initpass. 4. Click the Network tab. 5. Click Security. 6. Click the IPsec menu in the left navigation bar. 7. In - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 164
All Non-IPsec Traffic field, select the action to be taken for non-IPsec packets. When using Web Services, you must select Allow for All Non-IPsec Traffic. If you select Drop, Web Services cannot be used. 10. In the Broadcast/Multicast Bypass field, select Enabled or Disabled. 11. In the Protocol - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 165
's address bar (where "machine's IP address" is the machine's IP address). For example: http://192.168.1.2 3. Type a password if you have set one, and then click . The default password is initpass. 4. Click the Network tab. 5. Click Security. 6. Click the IPsec Address Template menu in the left - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 166
For example: 192.168.1.1/24 Because the prefix is specified in the form of a 24-bit subnet mask (255.255.255.0) for 192.168.1.1, the addresses 192.168.1.xxx are valid. 10. Select a Remote IP Address option to specify the IP address conditions for the recipient: • Any If you select Any, all IP - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 167
's address bar (where "machine's IP address" is the machine's IP address). For example: http://192.168.1.2 3. Type a password if you have set one, and then click . The default password is initpass. 4. Click the Network tab. 5. Click Security. 6. Click IPsec Template in the left navigation bar. The - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 168
Related Information • Manage Your Network Machine Securely Using IPsec • IKEv1 Settings for an IPsec Template • IKEv2 Settings for an IPsec Template • Manual Settings for an IPsec Template 164 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 169
Home > Security > Network Security Features > Manage Your Network Machine Securely Using IPsec > Configure an IPsec Template Using Web Based Management > IKEv1 Settings for an IPsec Template IKEv1 Settings for an IPsec Template Template Name Type a name for the template (up to 16 characters). 165 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 170
setting items are different depending on the selected template. The default template differs depending on whether you chose Main or Aggressive unprotected network. The Diffie-Hellman key exchange method uses a discrete logarithm problem, not the secret key, to send and receive open information that - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 171
Type the time (seconds) and number of kilobytes (KByte) before the IPsec SA will expire. • Encapsulation Mode Select Transport or Tunnel. • Remote Router IP-Address Type the IP address (IPv4 or IPv6) of the remote router. Enter this information only when the Tunnel mode is selected. SA (Security - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 172
Home > Security > Network Security Features > Manage Your Network Machine Securely Using IPsec > Configure an IPsec Template Using Web Based Management > IKEv2 Settings for an IPsec Template IKEv2 Settings for an IPsec Template Template Name Type a name for the template (up to 16 characters). 168 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 173
key exchange method allows secret keys to be securely exchanged over an unprotected network. The Diffie-Hellman key exchange method uses a discrete logarithm problem, not the secret key, to send and receive open information that was generated using a random number and the secret key. Select Group1 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 174
or Client-Mode. • Certificate Select the certificate. • User Name Type the user name (up to 32 characters). • Password Type the password (up to 32 characters). The password must be entered two times for confirmation. • Certificate Click this button to move to the Certificate configuration screen - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 175
Related Information • Configure an IPsec Template Using Web Based Management 171 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 176
Network Security Features > Manage Your Network Machine Securely Using IPsec > Configure an IPsec Template Using Web Based Management > Manual Settings for an IPsec Template Manual Settings for an IPsec Template Template Name Type a name for the template (up to 16 characters). Use Prefixed Template - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 177
) Specify the key to use for encryption. Type the In/Out values. These settings are necessary when Custom is selected in Use Prefixed Template, Manual is selected in Internet Key Exchange (IKE), and ESP is selected in Protocol in Encapsulating Security. The number of characters you can set differs - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 178
- ESP is a protocol for carrying out encrypted communication using IPsec. ESP encrypts the payload (communicated contents) and adds additional information. The IP packet is comprised of the header and the encrypted payload, which follows the header. In addition to the encrypted data, the IP packet - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 179
Home > Security > Network Security Features > Send an Email Securely Send an Email Securely • Configure Email Sending Using Web Based Management • Send an Email with User Authentication • Send an Email Securely Using SSL TLS 175 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 180
in the Network Configuration Report. 3. Type a password if you have set one, and then click . The default password is initpass. 4. Click the Network tab. 5. Service Provider (ISP). 8. When finished, click Submit. The Test Send E-mail Configuration dialog box appears. 9. Follow the instructions in - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 181
with User Authentication Send an Email with User Authentication Your machine supports the SMTP-AUTH method to send email via an email server about your email server settings, contact your network administrator or Internet Service Provider (ISP). To enable SMTP server authentication, in the Web - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 182
Securely Using SSL TLS Send an Email Securely Using SSL TLS Your machine supports SSL/TLS methods to send an email via an email server that requires signed the server certificate. Contact your network administrator or your Internet Service Provider (ISP) to confirm if importing a CA certificate is - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 183
Home > Security > Network Security Features > Use IEEE 802.1x Authentication for a Wired or a Wireless Network Use IEEE 802.1x Authentication for a Wired or a Wireless Network • What Is IEEE 802.1x Authentication? • Configure IEEE 802.1x Authentication for a Wired or a Wireless Network Using Web - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 184
Home > Security > Network Security Features > Use IEEE 802.1x Authentication for a Wired or a Wireless Network > What Is IEEE 802.1x Authentication? What Is IEEE 802.1x Authentication? IEEE 802.1x is an IEEE standard for wired and wireless networks that limits access from unauthorized network - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 185
signed the server certificate. Contact your network administrator or your Internet Service Provider (ISP) to confirm whether a CA certificate import is the Network tab. 5. Do one of the following: . The default password is initpass. Option Wired network Description Click Wired, and then select - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 186
server certificate. 7. When finished with configuration, click Submit. For wired networks: After configuring, connect your machine to the IEEE 802.1x supported network. After a few minutes, print the Network Configuration Report to check the Status. Option Description Success - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 187
SSL tunnel to PEAP, between a client and an authentication server, for sending a user ID and password. EAP-TTLS provides mutual authentication between the server and the client. This machine supports the following inner authentications: • EAP-TTLS/CHAP • EAP-TTLS/MS-CHAP • EAP-TTLS/MS-CHAPv2 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 188
Home > Security > Network Security Features > Store Print Log to Network Store Print Log to Network • Store Log to Network Overview • Configure the Store Print Log to Network Settings Using Web Based Management • Use the Store Print Log to Network's Error Detection Setting 184 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 189
The following print functions are recorded in the print log: • Print jobs from your computer • The Store Print Log to Network feature supports Kerberos authentication and NTLMv2 authentication. You must configure the SNTP protocol (network time server) for Authentication. • You can set the file type - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 190
address bar (where "machine's IP address" is the machine's IP address). For example: http://192.168.1.2 3. Type a password if you have set one, and then click . The default password is initpass. 4. Click the Administrator tab. 5. Click the Store Print Log to Network menu. 6. In the Print Log field - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 191
To test your settings, click Yes and then go to the next step. To skip the test, click No. Your settings will be submitted automatically. 10. The machine will test your settings. 11. If your settings are accepted, Test OK appears on the screen. If Test Error appears, check all settings, and then - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 192
Home > Security > Network Security Features > Store Print Log to Network > Use the Store Print Log to Network's Error Detection Setting Use the Store Print Log to Network's Error Detection Setting Use Error Detection Settings to determine the action that is taken when the print log cannot be stored - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 193
Home > Mobile/Web Connect Mobile/Web Connect • Print with Google Cloud Print™ • Print with Mopria™ • Print from a Mobile Device 189 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 194
Print with Google Cloud Print™ Google Cloud Print™ is a Google-provided service that allows you to print to a printer registered to your Google account using device (such as a mobile phone or computer) without installing the printer driver on the device. 1 2 3 4 1. Print request 2. Internet 3. - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 195
additional setup. Many native Android™ apps, including Google Chrome™, Gmail, and Gallery, support printing. 2 1 3 1. Android™ 4.4 or later 2. Wi-Fi® Connection 3. Your machine You must download the Mopria™ Print Service from the Google Play™ Store and install it on your Android™ device. Be - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 196
features of your machine directly from your iPhone, iPod touch, iPad, and iPad mini. Download and install Konica Minolta Mobile Print from the App Store. • For Windows Phone Devices Konica Minolta Mobile Print allows you to use features of your machine directly from your Windows Phone, without using - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 197
Home > Troubleshooting Troubleshooting Use this section to resolve typical problems you may encounter when using your machine. You can correct most problems yourself. IMPORTANT For technical help, you must call the country where you bought the machine. Calls must be made from within that country. - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 198
in the table. Follow the instructions in the Action column to solve the error and remove the message. You can correct most errors and perform routine maintenance by yourself. If you need more tips: Contact customer support. >> bizhub 4000i >> bizhub 5000i bizhub 4000i Error Message 2-sided Disabled - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 199
If the problem continues, replace the imaging unit with a new one. The imaging unit or the toner cartridge and Settings. The media type specified in the printer driver differs from the paper type specified in the paper tray. Make sure the paper guides are set to the correct size. If paper is - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 200
sure the paper guides are set to the correct size again. • If the problem continues, contact customer support. It is time to instructions included with the new imaging unit. The toner cartridge is at the end of Replace the toner driver is not supported by the defined tray. Choose a paper size - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 201
Size Error DX Size Mismatch Toner Low Too Many Trays bizhub 5000i Error Message 2-sided Disabled Access in the imaging unit again. Reinstall the toner cartridge and imaging unit assembly in the machine. If the problem continues, contact customer support. The temperature of the inside of Make - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 202
Mismatch No Drum Unit No HUB Support No Paper No Paper Fed T1 problem continues, replace the imaging unit with a new one. The imaging unit or the toner media type specified in the printer driver differs from the paper type specified in Make sure the paper guides are set to the correct size. If paper - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 203
in the paper tray indicated on the LCD. Make sure the paper guides are set to the correct size. • If paper is in the tray, remove then turn it on again. • If the problem continues, contact customer support. The toner cartridge is at the end of Replace the toner cartridge with a new one. its life. - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 204
paper size defined in the printer driver is not supported by the defined tray. Choose a paper size supported by the defined tray. The paper instructions included with the new imaging unit. If the LCD displays this message, Order a new toner cartridge now so you have you can still print. The toner - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 205
Home > Troubleshooting > Paper Jams Paper Jams Always remove the remaining paper from the paper tray and straighten the stack when you are adding new paper. This helps - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 206
Home > Troubleshooting > Paper Jams > Paper is Jammed in the MP tray Paper is the paper stays under the maximum paper height guides (1) on both sides of the tray. 1 5. Do one of the following: • (bizhub 4000i) Press Go to resume printing. • (bizhub 5000i) Press [Retry] to resume printing. Related - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 207
Home > Troubleshooting > Paper Jams > Paper is Jammed in the Paper Tray Paper is Jammed in the Paper Tray If the paper more easily. 3. Fan the stack of paper to prevent further jams, and slide the paper guides to fit the paper size. 4. Make sure the paper is below the maximum paper mark (b b b). 203 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 208
5. Put the paper tray firmly back in the machine. Related Information • Paper Jams 204 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 209
Home > Troubleshooting > Paper Jams > Paper is Jammed in the Back of the Machine Paper is Jammed in the Back of the Machine If the machine's control panel - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 210
5. Close the fuser cover. 6. Close the back cover until it locks in the closed position. Related Information • Paper Jams 206 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 211
Home > Troubleshooting > Paper Jams > Paper is Jammed inside the Machine Paper is fan to cool the extremely hot parts inside the machine. 2. Open the front cover. 3. Remove the toner cartridge and imaging unit assembly. WARNING HOT SURFACE The machine's internal parts will be extremely hot. Wait - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 212
6. Close the front cover. Related Information • Paper Jams 208 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 213
Home > Troubleshooting > Paper Jams > Paper is Jammed in the 2-sided Tray Paper is Jammed in the 2-sided Tray If the machine's control panel indicates that there is a - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 214
6. If paper is not caught inside the 2-sided tray, open the back cover. WARNING HOT SURFACE The machine's internal parts will be extremely hot. Wait for the machine to cool down before touching them. 7. Use both hands to gently pull the jammed paper out of the back of the machine. 8. Close the back - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 215
Troubleshooting > Printing Problems Printing Problems Difficulties No printout The machine is not printing or has stopped printing. Suggestions Check that the correct printer driver driver Online. • Windows7 and Windows Server 2008 R2 Click /Start > Devices and Printers . Right-click KONICA MINOLTA - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 216
bizhub 5000i) Press . The machine prints the first couple of pages correctly, then some pages have missing text. The machine does not print on both sides of the paper even though the printer driver setting is 2-sided and the machine supports Related Information • Troubleshooting Related Topics: • - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 217
unit. • Replace the imaging unit with a new imaging unit. • Replace the toner cartridge with a new toner cartridge. • The fuser unit may be contaminated. Contact customer support. • Make sure the media type setting in the driver matches the type of paper you are using. • Clean the imaging unit - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 218
ribbing across the page • Select the appropriate media type in the printer driver. • Select the appropriate media type in the menu setting. • The problem may disappear by itself. Print multiple blank pages to clear this problem, especially if the machine has not been used for a long time. • Clean - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 219
mm) intervals If the problem is not solved after support. • Make sure foreign material such as a torn piece of paper, sticky notes or dust is not inside the machine and around the toner cartridge and imaging unit. • The toner cartridge may be damaged. Replace the toner cartridge with a new toner - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 220
in the input tray. • Make sure the media type setting in the driver matches the type of paper you are using. • Choose Improve Toner Fixing mode in the printer driver. If this selection does not provide enough improvement, change the printer driver setting in Media Type to a thick setting. If you are - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 221
Related Topics: • Test Print • Clean the Imaging Unit 217 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 222
Home > Troubleshooting > Network Problems Network Problems • Error Messages • Where Can I Find My Machine's Network Settings? • I Cannot Complete the Wireless Network Setup Configuration • My Machine Cannot Print over the Network • I Want to - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 223
Home > Troubleshooting > Network Problems > Error Messages Error Messages Your machine will display an error message if an error occurs. The most common error messages are shown in the table. >> bizhub 4000i >> bizhub 5000i bizhub 4000i Error Messages Authentication Error, contact your - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 224
bizhub 5000i Error Messages Cause Action A device is already connected. Press [ and the mobile device to an obstruction-free area. If you are manually configuring the Wi-Fi Direct network, make sure you have entered the correct password. If your mobile device has a configuration page for how to - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 225
. This machine's CIFS protocol is disabled. Confirm your authentication method, and then enable the necessary protocol setting in the Web Based Management. Related Information • Network Problems 221 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 226
Home > Troubleshooting > Network Problems > Where Can I Find My Machine's Network Settings? Where Can I Find My Machine's Network Settings? • Print the Network Configuration Report • Change Machine Settings from Your Computer 222 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 227
unable to resolve the problem, follow the instructions below: Investigate the problem using the WLAN Report. password. - When you are configuring the network manually, the SSID and password are displayed on your machine. If your mobile device supports the manual configuration, the SSID and password - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 228
a client, confirm how many devices are allowed in the current Wi-Fi Direct network, and then check how many devices are connected. Related Information • Network Problems Related Topics: • Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast • Use Wi-Fi Direct® 224 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 229
Home > Troubleshooting > Network Problems > My Machine dialog box even after successful installation. To allow access, see the instructions for your security software or ask the software manufacturer. • Confirm the printer driver and reinstall it. Related Information • Network Problems 225 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 230
Related Topics: • Print the WLAN Report • Wireless LAN Report Error Codes • I Want to Check that My Network Devices are Working Correctly 226 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 231
Troubleshooting > Network Problems All protective packaging has been removed from the machine. • The toner cartridge and imaging unit are installed correctly. • The front and of the above but you are still having problems, see the instructions supplied with your wireless LAN access point/router - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 232
Home > Troubleshooting > Other Problems Other Problems Difficulties The machine will not turn on. The software cannot be installed. Related Information • Troubleshooting Suggestions Adverse conditions on the power connection (such as lightning or a power surge) may have triggered the machine's - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 233
Home > Troubleshooting > Check the Machine Information Check the Machine Information Follow these instructions to check your machine's serial number and firmware version. >> bizhub 4000i >> bizhub 5000i bizhub 4000i 1. Press a or b to select the [Machine Info.] option, and then press OK. 2. Press a - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 234
machine's firmware version. Check the number of total pages the machine has printed. Check the percentage of the supplies' life that remains available. Related Information • Troubleshooting 230 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 235
Home > Troubleshooting > Reset Functions Reset Functions • Network Reset • Factory Reset 231 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 236
function to restore the print server's network settings, such as password and IP address, back to its default factory settings. • Unplug all the interface cables before you perform a Network Reset. >> bizhub 4000i >> bizhub 5000i bizhub 4000i 1. Press a or b to select the [Reset Menu] option, and - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 237
Home > Troubleshooting > Reset Functions > Factory Reset Factory Reset Use the Factory Reset function to restore all settings back to the factory settings. Unplug all the interface cables before you perform a Factory Reset. >> bizhub 4000i >> bizhub 5000i bizhub 4000i 1. Press a or b to select the - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 238
Home > Routine Maintenance Routine Maintenance • Replace Supplies • Clean the Machine • Check the Remaining Life of Parts • Replace Periodic Maintenance Parts 234 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 239
on the print volume, types of media used, and powering on/off the machine. • Handle the toner cartridge carefully. If toner scatters on your hands or clothes, immediately wipe or wash it off with cold water. • To avoid print quality problems, DO NOT touch the shaded parts shown in the illustrations - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 240
Imaging unit Related Information • Routine Maintenance • Replace the Toner Cartridge • Replace the Imaging Unit • Reset the Drum Counter Related Topics: • Error and Maintenance Messages 236 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 241
and imaging unit assembly from the machine. 4. Push down the lock lever and take the toner cartridge out of the imaging unit. 5. Unpack the new toner cartridge. 6. Remove the protective cover. 7. Put the new toner cartridge firmly into the imaging unit until you hear it lock into place. 237 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 242
toner cartridges. When you want to buy toner cartridges, contact customer support. • DO NOT unpack the new toner cartridge until you are ready to install it. • If a toner warranty coverage does not apply to any problem that is caused by the use of third party toner and/or cartridges. To protect your - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 243
Related Information • Replace Supplies 239 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 244
Imaging Unit Replace the Imaging Unit 1. Make sure the machine is turned on. 2. Open the front cover. 3. Remove the toner cartridge and imaging unit assembly from the machine. 4. Push down the lock lever and take the toner cartridge out of the imaging unit. 5. Unpack the new imaging unit. 6. Put the - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 245
it is not, printed pages may have a vertical stripe. 8. Install the toner cartridge and imaging unit assembly back into the machine. 9. Close the front cover life of the machine itself. Warranty coverage does not apply to problems caused by the use of a non-genuine imaging unit. Related Information - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 246
the drum counter by completing the following steps: IMPORTANT DO NOT reset the drum counter unless you are replacing the imaging unit. >> bizhub 4000i >> bizhub 5000i bizhub 4000i 1. Make sure the machine is turned on. 2. Open the front cover. 3. Press and hold OK for about two seconds to display - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 247
isopropyl alcohol to remove dirt from the control panel. It may crack the panel. • To avoid print quality problems, DO NOT touch the shaded parts shown in the illustrations. Toner cartridge Imaging Unit Related Information • Routine Maintenance • Clean the Touchscreen LCD • Clean the Corona Wire 243 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 248
• Clean the Imaging Unit • Clean the Paper Pick-up Rollers 244 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 249
Home > Routine Maintenance > Clean the Machine > Clean the Touchscreen LCD Clean the Touchscreen LCD Related Models: bizhub 5000i IMPORTANT DO NOT use any type of liquid cleaners (including ethanol). 1. Press and hold to turn off the machine. 2. Clean the touchscreen with a dry, soft - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 250
the Machine > Clean the Corona Wire Clean the Corona Wire If you have print quality problems or the control panel displays [Drum !] status, clean the corona wire. 1. Open the front cover. 2. Remove the toner cartridge and imaging unit assembly from the machine. 3. Clean the corona wire inside the - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 251
, such as glue from a label, stuck on the drum surface. >> bizhub 4000i >> bizhub 5000i bizhub 4000i 1. Make sure the machine is in Ready Mode. 2. Press a l 7. Remove the toner cartridge and imaging unit assembly from the machine. 8. Push down the lock lever and take the toner cartridge out of the - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 252
region "2". 11. Turn the edge of the imaging unit toward you while looking at the drum surface to find the mark. • To avoid print quality problems, DO NOT touch the surface of the imaging unit, only the edge. • You can turn the imaging unit gear more easily by pulling down the - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 253
in correctly or it may separate from the imaging unit. 14. Install the toner cartridge and imaging unit assembly back into the machine. 15. Close the front cover of the machine. 16. Press to turn on the machine. bizhub 5000i 1. Make sure the machine is in Ready Mode. 2. Press [Settings] > [Machine - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 254
and imaging unit assembly from the machine. 7. Push down the lock lever and take the toner cartridge out of the imaging unit. 8. Turn the imaging unit as shown in the illustration. Make sure that the imaging unit gear is on the - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 255
toward you while looking at the drum surface to find the mark. • To avoid print quality problems, DO NOT touch the surface of the imaging unit, only the edge. • You can turn the object or any liquids. 12. Put the toner cartridge firmly into the imaging unit until you hear it lock into place. 251 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 256
cartridge in correctly or it may separate from the imaging unit. 13. Install the toner cartridge and imaging unit assembly back into the machine. 14. Close the front cover of the machine. 15. Press to turn on the machine. Related - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 257
Pick-up Rollers Cleaning the paper pick-up rollers periodically may prevent paper jams by ensuring that paper feeds properly. If you have paper feed problems, clean the pick-up rollers as follows: 1. Press and hold to turn off the machine. 2. Pull the paper tray completely out of the machine. 3. If - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 258
Related Topics: • Printing Problems 254 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 259
Press a or b to select the machine part you want to check, and then press OK. The LCD displays the approximate remaining part life. bizhub 5000i 1. Press [Settings] > [Machine Information] > [Parts Life]. 2. Press a or b to display the machine parts, and then press the machine part you want to check - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 260
Maintenance > Replace Periodic Maintenance Parts Replace Periodic Maintenance Parts Replace the following parts regularly to maintain print quality. Contact customer support when the following message appears on the LCD: LCD Message Replace Fuser Replace Laser Replace PF Kit1 Replace PF Kit2 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 261
Home > Machine Settings Machine Settings Customize settings and features, create shortcuts, and work with options displayed on the machine's LCD to make your machine a more efficient work tool. • Change Machine Settings from the Control Panel • Change Machine Settings from Your Computer 257 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 262
Home > Machine Settings > Change Machine Settings from the Control Panel Change Machine Settings from the Control Panel • General Settings • Settings and Features Tables 258 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 263
Mode Countdown • About Deep Sleep Mode • Set Auto Power Off Mode • Adjust the LCD Backlight Brightness • Change How Long the LCD Backlight Stays On • Reduce Toner Consumption • Reduce Printing Noise • Change the Language on the LCD 259 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 264
Settings > Change Machine Settings from the Control Panel > General Settings > Adjust the Machine's Volume Adjust the Machine's Volume Related Models: bizhub 5000i 1. Press [Settings] > [General Setup] > [Volume] > [Beep]. 2. Press a or b to display the [Off], [Low], [Med] or [High] option, and then - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 265
. The machine will wake up and start printing when it receives a print job. Use these instructions to set a time delay (countdown) before the machine enters Sleep Mode. >> bizhub 4000i >> bizhub 5000i bizhub 4000i 1. Press a or b to select the [General Setup] option, and then press OK. 2. Press a or - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 266
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > About Deep Sleep Mode About Deep Sleep Mode If the machine is in Sleep Mode and does not receive any jobs for certain length of time, the machine will automatically enter Deep Sleep Mode. The length of - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 267
go into Power Off Mode when the machine is connected to a network or has secure print data in the memory. • To start printing, press >> bizhub 4000i >> bizhub 5000i bizhub 4000i on the control panel and then send a print job. Select how long the machine must be in Deep Sleep Mode before it goes - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 268
Machine Settings from the Control Panel > General Settings > Adjust the LCD Backlight Brightness Adjust the LCD Backlight Brightness Related Models: bizhub 5000i If you are having difficulty reading the LCD, changing the brightness setting may help. 1. Press [Settings] > [General Setup] > [Panel - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 269
the Control Panel > General Settings > Change How Long the LCD Backlight Stays On Change How Long the LCD Backlight Stays On Related Models: bizhub 5000i Set how long the LCD backlight stays on after you return to the LCD's Home screen. 1. Press [Settings] > [General Setup] > [Panel Control] > [LCD - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 270
Save is set to on, the print on your documents appears lighter. We DO NOT recommend using the Toner Save feature for printing photo or grayscale images. >> bizhub 4000i >> bizhub 5000i bizhub 4000i 1. Press a or b to display the [General Setup] option, and then press OK. 2. Press a or b to display - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 271
setting can reduce printing noise. When Quiet Mode is turned on, the print speed becomes slower. The factory setting is off. >> bizhub 4000i >> bizhub 5000i bizhub 4000i 1. Press a or b to display the [General Setup] option, and then press OK. 2. Press a or b to display the [Ecology] option, and - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 272
on the LCD Change the Language on the LCD Change the LCD language if needed. This feature is not available in some countries. >> bizhub 4000i >> bizhub 5000i bizhub 4000i 1. Press a or b to display the [General Setup] option, and then press OK. 2. Press a or b to display the [Local Language] option - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 273
Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features Tables Settings and Features Tables The Settings tables will help you understand the menu selections and options that are found in the machine's programs. • Access Menus and Change Your Machine's - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 274
Panel > Settings and Features Tables > Access Menus and Change Your Machine's Settings Access Menus and Change Your Machine's Settings Related Models: bizhub 4000i Use the control panel to access the machine's menus and change various settings. 1. Scroll through each menu level by pressing a or - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 275
Line LCD models) Settings Tables (1 Line LCD models) Related Models: bizhub 4000i Use these tables to understand the various menus and options that you the total printed pages. Parts Life 1 Toner Life Drum Life Display the remaining life of the toner cartridge. Display the remaining life of the - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 276
resolution. Density - Increase or decrease the print density. Ecology Toner Save Increase the page yield of the toner cartridge. Sleep Time Set how much time will pass before the your machine's settings using the Setting Lock password. Interface Select Select the interface to use. 272 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 277
Delete the registered Font data. Restore the Macro and Font data of your machine to the default settings. [Print Menu] Level 1 Level 2 Description Emulation - Choose the emulation mode. a tray mismatch appears when you use the HP drivers. Epson FX-850 Font No. Set the font number. 273 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 278
Level 1 Level 2 Description Epson FX-850 Font Pitch Set the font pitch. The Font Pitch menu appears when you choose I012 to I018, I031 to I037 or I097 to I109 in Font No. setting. Font Point Set the font size. The Font Point menu appears when you choose I000 to I011, I019 to I030 or I038 to - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 279
status. MAC Address - Display the MAC address of the machine. Set to Default - Restore wired network settings of your machine to the factory settings. Wired Enable WPS with a PIN code quickly. Manual - Configure your Wi-Fi Direct network settings manually. Group Owner - Set your machine as - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 280
of the IP protocol that provides authentication and encryption services. We recommend contacting your network administrator before changing If the 'Boot Method' of the machine is set to 'Static' you must manually enter an IP address from the machine's control panel. [Reset Menu] Level 1 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 281
models) Settings Tables (1.8 inch touchscreen models) Related Models: bizhub 5000i [Settings] > [Machine Information] Level 2 Level 3 Display the total printed pages. Parts Life 1 Toner Life Drum Life Display the remaining life of the toner cartridge. Display the remaining life of the imaging - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 282
Increase or decrease the print density. Ecology Toner Save - Increase the page yield of the toner cartridge. Sleep Time - Set how much LCD backlight stays on after the last finger press. Setting Lock Set Password Lock Off⇒On - Restrict unauthorized users from changing the machine's settings. - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 283
the registered Font data. Restore the Macro and Font data of your machine to the default settings. [Settings] > [Print Menu] Level 2 Level 3 Descriptions Emulation - Choose mismatch appears when you use the HP drivers. Epson FX-850 Font No. Set the font number. Font Pitch Set the font pitch - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 284
Level 2 Level 3 Descriptions Epson FX-850 The Font Pitch menu appears when you choose I012 to I018, I031 to I037 or I097 to I109 in Font No. setting. Font Point Set the font size. The Font Point menu appears when you choose I000 to I011, I019 to I030 or I038 to I096 in Font No. setting. - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 285
LAN Level 3 TCP/IP Level 4 WINS Configuration WINS Server DNS Server WLAN IP Boot Tries APIPA Ethernet Wired Status MAC Address Set to Default Wired Enable TCP/IP IPv6 - Boot Method IP Address Subnet Mask Gateway WINS Configuration WINS Server DNS Server IP Boot Tries APIPA Setup Wizard - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 286
MAC Address Set to Default WLAN Enable Wi-Fi Direct Push Button - Status Signal SSID Comm. Mode - - PIN Code - NFC Security Manual - Group Owner of the IP protocol that provides authentication and encryption services. We recommend contacting your network administrator before changing this - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 287
Related Information • Settings and Features Tables 283 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 288
Tables > Features Tables (1.8 inch touchscreen models) Features Tables (1.8 inch touchscreen models) Related Models: bizhub 5000i (Toner) Level 2 Level 3 Descriptions (Toner) Toner Life View the approximate remaining toner life. Test Print Print the test page. (Wi-Fi Setup) Level 2 Level - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 289
Home > Machine Settings > Change Machine Settings from Your Computer Change Machine Settings from Your Computer • Change Machine Settings Using Web Based Management • Where Can I Find My Machine's Network Settings? • Network Management Software and Utilities 285 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 290
Hyper Text Transfer Protocol (HTTP) or Hyper Text Transfer Protocol over Secure Socket Layer (HTTPS). • What is Web Based Management? • Access Web Based Management • Set a Login Password for Web Based Management • Network Management Software and Utilities 286 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 291
the timer settings. Print Use this tab to confirm and change the print settings. Administrator Use this tab to set the Web Based Management password, reset various settings, and configure the function settings that are mainly used by administrators. You can also use Secure Function Lock to restrict - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 292
Related Information • Change Machine Settings Using Web Based Management 288 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 293
node name. - For example: http://KMNxxxxxxxxxxxx The NetBIOS name can be found in the Network Configuration Report. 3. Type a password if you have set one, and then click . The default password is initpass. You can now change the print server settings. If you change the protocol settings, you must - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 294
if you have set one, and then click . The default password is initpass. 4. Click Administrator. 5. Type the password you want to use in the Enter New Password field (up to 32 characters). 6. Retype the password in the Confirm New Password field. 7. Click Submit. In the future, every time you - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 295
Home > Appendix Appendix • Specifications • How to Enter Text on Your Machine 291 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 296
Source Power Consumption (Average) Peak Printing Dimensions Ready Power Off 1 Laser Electrophotographic Laser Printer • (bizhub 4000i) 256 MB • (bizhub 5000i) 512 MB • (bizhub 4000i) 16 characters x 1 line • (bizhub 5000i) 1.8 in. TFT Color Touchscreen LCD • 110 to 120 V AC 50/60Hz • 127 V AC - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 297
27.3 lb (12.4 kg) • (bizhub 5000i) 29.1 lb (13.2 kg) • (bizhub 4000i) 52 dB (A) • (bizhub 5000i) 54 dB (A) 50 dB (A) • (bizhub 4000i) 34 dB (A) • (bizhub 5000i) 35 dB (A) • (bizhub 4000i) 72.5 dB (A) • (bizhub 5000i) 73.7 dB (A) 64.7 dB (A) • (bizhub 4000i) 47 dB (A) • (bizhub 5000i) 48 dB (A) 50 to - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 298
bizhub 4000i) Up to 150 Sheets of 20 lb (80 g/m2) Plain Paper (face down delivery to the face down output paper tray) • (bizhub 5000i • (bizhub 4000i) One sheet (face up delivery to the face up output tray) • (bizhub 5000i) Up Lower Trays 250 sheets (only for bizhub 5000i) 3 For labels, we recommend - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 299
-hoc Mode) IEEE 802.11g/n (Wi-Fi Direct) ID card bizhub 5000i Yes 1 Your machine has a USB 2.0 Hi-Speed interface. The machine can also be connected to a computer that has a USB 1.1 interface. 2 Third party USB ports are not supported. 3 Use a straight-through Category 5 (or greater) twisted-pair - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 300
OS X v10.10.x N/A System OS X v10.11.x macOS v10.12.x macOS v10.13.x macOS v10.14.x Printing 1 Not Available 2 Third party USB ports are not supported. All trademarks, brand and product names are the property of their respective companies. Related Information • Appendix 296 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 301
when the character or symbol you want is displayed, and then enter the next character. • Press Back to delete characters entered incorrectly. bizhub 5000i When text is required, a keyboard appears on your machine's LCD. • The characters may differ depending on your country. • The keyboard layout may - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 302
Home > Glossary Glossary This is a comprehensive list of features and terms that appear in manuals. Availability of these features depends on the model you purchased. A B C D E G H I L M N O P R S T V W A • Active Directory Authentication • Ad-Hoc Mode • AES • APIPA • ARP • Authentication B • BOOTP - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 303
Home > Glossary • DNS Server E • Encryption G • Gateway H • HTTP (Web Server) • HTTPS I • IEEE 802.1x • Infrastructure Mode • IP Address • IPP • IPPS • IPsec • IPv6 L • LEAP • LLMNR • LPD • LPR M • MAC Address • mDNS 299 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 304
Home > Glossary N • NetBIOS Name Resolution • Network Configuration Report • Network Key • Network Shared Printing • Node Name O • Open System P • PEAP • Peer-to-Peer • Protocols • Public Key Cryptosystem R • RARP • Resolution S • Secure Function Lock 3.0 • Settings Tables • Shared Key Cryptosystem - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 305
Home > Glossary • SNTP • SSID • SSL/TLS • Store Print Log to Network • Subnet Mask T • TCP/IP • TELNET • TKIP V • Vertical Pairing W • Web Based Management • WEP • Wi-Fi Direct® • WINS • WINS Server • WLAN Report • WPA-PSK/WPA2-PSK Authentication Method • WPS 301 - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 306
log on to the machine using a user ID and password. Ad-Hoc Mode The mode of operation in a wireless APIPA If you do not assign an IP address manually or automatically (using a DHCP, BOOTP, or RARP as a home wireless network) without IEEE 802.1x support. • Open system Wireless devices are allowed to - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 307
Home > Glossary • PEAP • EAP-TTLS • EAP-TLS The authentication methods above use the user ID less than 64 characters and a password of less than 32 characters in length. BOOTP The Bootstrap Protocol (BOOTP) is a network protocol used by a network client to obtain an IP Address from a - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 308
protocol on a TCP/IP network that enables interactive data transmission. Default is Port 9100. Density Changing the Density makes the whole image use DHCP, contact your network administrator. DNS Client The print server supports the Domain Name System (DNS) client feature. This feature allows the - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 309
is a large network, for example using your machine in a business enterprise wireless network, with IEEE 802.1x support. If you configure your machine in an IEEE 802.1x supported wireless network, you can use the following encryption methods. • TKIP • AES • CKIP The original key Integrity Protocol - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 310
feature of the IP protocol that provides authentication and encryption services. IPv6 IPv6 is the next generation Internet protocol. LEAP Lightweight method developed by Cisco Systems, Inc. that uses a user ID and password for authentication. LEAP is used in wireless networks. LLMNR The Link-Local - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 311
Configuration Report The Network Configuration Report prints a report listing the current network configuration, including the network print server settings. Network Key The Network Key is a password, which is used when the data is encrypted or decrypted. The Network Key is also described as the - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 312
Layer Security (TLS) tunnel between a client and an authentication server, for sending a user ID and password. PEAP provides mutual authentication between the server and the client. This machine supports the following inner authentications: • PEAP/MS-CHAPv2 • PEAP/GTC Peer-to-Peer Peer-to-Peer is - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 313
Home > Glossary Settings Tables At-a-glance instructions that show all the settings and options that are SSID Each wireless network has its own unique network name and it is technically referred to as a Service Set Identifier (SSID). The SSID is a 32-byte or less value and is assigned to the - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 314
Home > Glossary SSL/TLS Secure Socket Layer (SSL) or Transport Layer Security (TLS) is an effective method of protecting data that is sent over a local or wide area network. SSL/TLS works by encrypting data, such as a print job, sent over a network, so anyone trying to capture it will not be able to - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 315
is a technology for Windows that allows your Vertical Pairing-supported wireless machine to connect to your Infrastructure network using the PIN Method of Wi-Fi Protected Setup™ and the Web Services feature. It also enables printer driver installation from the printer icon in the Add a device - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 316
Home > Glossary WPA-PSK/WPA2-PSK Authentication Method WPA-PSK/WPA2-PSK authentication method enables a Wi-Fi Protected Access® Pre-shared key (WPA-PSK/ WPA2-PSK), which enables the wireless machine to associate with access points using TKIP for WPA-PSK or AES for WPA-PSK and WPA2-PSK (WPA-Personal - Konica Minolta bizhub 5000i | bizhub 5000i/4000i User Guide - Page 317
http://konicaminolta.com ACET-9916-00
User's Guide
© 2019 KONICA MINOLTA, INC. All rights reserved.