Konica Minolta bizhub 5000i bizhub 5000i/4000i User Guide - Page 72
Con Your Machine for a Wireless Network in Ad-Hoc Mode Using an Existing SSID, Home >
View all Konica Minolta bizhub 5000i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Home > Network > Additional Methods of Configuring Your Machine for a Wireless Network > Configure Your Machine for a Wireless Network in Ad-Hoc Mode (For IEEE 802.11b/g/n) > Configure Your Machine for a Wireless Network in Ad-Hoc Mode Using an Existing SSID Configure Your Machine for a Wireless Network in Ad-Hoc Mode Using an Existing SSID If you are trying to pair your machine to a computer that is already in Ad-Hoc mode and has a configured SSID, use these instructions. >> bizhub 4000i >> bizhub 5000i bizhub 4000i Before configuring your machine, we recommend writing down your wireless network settings. You will need this information before you continue with the configuration. 1. Check and record the current wireless network settings of the computer to which you are connecting. The wireless network settings of the computer you are connecting with must be set to Ad-Hoc mode with an SSID already configured. For more information on how to configure your computer in Ad-Hoc mode, see the instructions included with your computer or contact your network administrator. Network Name (SSID) Communication Mode Ad-Hoc For example: Network Name (SSID) HELLO Communication Mode Ad-Hoc Encryption Mode NONE WEP Encryption Mode WEP Network Key - Network Key 12345 Your machine supports the use of the first WEP key only. 2. Press a or b to select the [Network] option, and then press OK. 3. Press a or b to select the [WLAN] option, and then press OK. 4. Press a or b to select the [Setup Wizard] option, and then press OK. 5. When [WLAN Enable?] appears, press a to select On. This will start the wireless setup wizard. To cancel, press Cancel. 6. The machine will search for your network and display a list of available SSIDs. When a list of SSIDs appears, press a or b to select the SSID you want. 7. Press OK. 8. Enter the WEP key, and then press OK. To apply the settings, press a. To cancel, press b. Your machine supports the use of the first WEP key only. 9. The machine will attempt to connect to the wireless device you have selected. 68