Konica Minolta bizhub C360 bizhub C220/C280/C360 Network Scan/Fax/Network Fax - Page 46

4.1 To begin operation 4 4 Registering the basic information This section explains the necessary settings and registrations before using the fax and scan functions of this machine. 4.1 To begin operation The following registrations are required in order to use this machine. 4.1.1 Environment and device requirements The following environment and devices must be prepared to use various functions of this machine. Functions Network scan function G3 fax function Network fax function Internet Fax IP Address Fax Environment and device • Connection to network • Network settings • Optional Fax Kit FK-502 installed • Connection of modular cable • Connection to network • Network settings • Optional Fax Kit FK-502 installed • Connection to network • Network settings 4.1.2 Network connection and settings Connection to the network and the network settings are required to use the function of this machine that sends image data over the network, such as the Network Scan and Network Fax functions. Connection to network Connect a UTP cable (category 5 or later recommended) connected to the network to the Ethernet connector on the machine. bizhub C360/C280/C220 4-2