Konica Minolta bizhub C3850FS bizhub C3850FS/C3850/C3350 Introduction User Gui - Page 29
Extending the output tray of the finisher (bizhub C3850FS only)
View all Konica Minolta bizhub C3850FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
3.4 Extending the output tray of the finisher (bizhub C3850FS only) 3 3.4 Extending the output tray of the finisher (bizhub C3850FS only) When using bizhub C3850FS, you can extend the output tray of the finisher to prevent printed materials from falling off. 1 Hold the handle on the front of the main tray, then pull the extension tray out toward the front side. 2 Turn the pull-out part of the extension tray counterclockwise, then insert it into the main tray. [Introduction] 3-9
[Introduction]
3-9
3.4
Extending the output tray of the finisher (bizhub C3850FS only)
3
3.4
Extending the output tray of the finisher (bizhub C3850FS only)
When using
bizhub C3850FS
, you can extend the output tray of the finisher to prevent printed materials from
falling off.
1
Hold the handle on the front of the main tray, then pull the extension tray out toward the front side.
2
Turn the pull-out part of the extension tray counterclockwise, then insert it into the main tray.