Konica Minolta bizhub C3850FS bizhub C3850FS/C3850/C3350 Introduction User Gui - Page 50
Loading paper into Tray 2/3, Tray 2/3, Control Panel
View all Konica Minolta bizhub C3850FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
6.4 Loading paper into Tray 2/3 6 4 Load paper into the tray with the print side facing up. % For details on the available paper sizes, refer to page 6-2. NOTICE Do not load the sheets up to the point where the top of the stack is higher than the , mark. If paper is curled, flatten it before loading. 5 Align the paper guide to the paper size. 6 Close Tray 2/3. 7 If necessary, change the paper type on the Control Panel. % To configure settings: [Utility] - [User Settings] - [Printer Settings] - [Paper Setting] - [Paper Tray] [Tray 2] or [Tray 3] % The paper size is automatically set. [Introduction] 6-11
[Introduction]
6-11
6.4
Loading paper into Tray 2/3
6
4
Load paper into the tray with the print side facing up.
%
For details on the available paper sizes, refer to page 6-2.
NOTICE
Do not load the sheets up to the point where the top of the stack is higher than the
,
mark.
If paper is curled, flatten it before loading.
5
Align the paper guide to the paper size.
6
Close
Tray 2/3
.
7
If necessary, change the paper type on the
Control Panel
.
%
To configure settings: [Utility] - [User Settings] - [Printer Settings] - [Paper Setting] - [Paper Tray] -
[Tray 2] or [Tray 3]
%
The paper size is automatically set.