Konica Minolta bizhub C3850FS bizhub C3850FS/C3850/C3350 Introduction User Gui - Page 34
Using the Power key, When using the Power key as a Power Save key
View all Konica Minolta bizhub C3850FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
4.3 Using the Power key 4 4.3 Using the Power key Press the Power key to switch this machine to Power Save mode. You can select [Power Save] or [Sub Power OFF] as Power Save mode that is activated when the Power key is pressed. To configure settings: [Utility] - [Administrator Settings] - [System Settings] - [Power Supply/Power Save Settings] - [Power Save Key] (The default varies depending on the region the machine is used in.) When using the Power key as a Power Save key When the Power key is pressed, the status of this machine changes as shown below. Depending on how long the Power key is pressed, the state of the power saving mode to be activated will differ. Power key Short press Status of this machine Low Power mode (Default) Status of LED Flash: Blue Sleep mode Flash: Blue Hold down Sub Power OFF Light up: Orange Description Turns off the display of the Touch Panel to reduce power use. This machine returns to Normal mode when it receives data or faxes or when the user operates the Touch Panel. Provides a greater power saving effect than Low Power mode. The time required to return to Normal mode is longer than that from Low Power mode. This machine returns to Normal mode when it receives data or faxes or when the user operates the Touch Panel. Provides a greater power saving effect than Sleep mode. While the sub power is turned off, this machine can receive data or faxes, however, it cannot scan or print an original. If data or faxes are received while the sub power is turned off, they are printed when the machine returns to Normal mode. To enable the machine to return to Normal mode from the Sub Power OFF status, press the Power key again. Related setting (for the administrator) - Press the Power key to select whether to switch to Low Power or Sleep mode. To configure settings: [Utility] - [Administrator Settings] - [System Settings] - [Power Supply/Power Save Settings] - [Power Save Settings] (Default: [Low Power]) - You can select whether Deep Sleep mode is activated to further reduce power use when this machine is in Sleep mode. When the machine is in Deep Sleep mode, it will not return to Normal mode when the user operates the Touch Panel. To return to Normal mode, press the Power key. To configure settings: [Utility] - [Administrator Settings] - [System Settings] - [Power Supply/Power Save Settings] - [Power Consumption in Sleep Mode] (Default: [Enabled]) [Introduction] 4-4