Konica Minolta bizhub PRESS 1250 Watkiss PowerSquare 2-Knife Trimmer User Manu - Page 15

CHAPTER 4 Standard Tasks Introduction This chapter describes the standard tasks that are needed in the day-to-day operation of your Side-Trimmer. Adjust the Side-Trim Offset Introduction By default, the book is side-trimmed by an equal amount on each side. The side-trim dimension is automatically calculated to trim 2.5mm from each side. For example, if the book is 210mm wide, the default trim is 205mm. This sidetrim dimension can be changed. Touch BASIC > SIDE TRIM and then touch '+' or ' - ' to adjust the TRIM SIZE. The side-trim can be offset from the centre line by a maximum of 40mm, dependent on how much is to be trimmed. The machine will not permit a setting that conflicts with the stitch position. Change the stitch pitch if necessary (see "Adjust the Side-Trim Offset" on page 11). Maximum side-trim offset Trim 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 (x2) Max 40 38 36 34 32 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2 0 offset If the TRIM OFFSET is changed, the icon changes to show the setting. The icon is the same orientation as the book delivery out of the Side-Trimmer. Watkiss P2T 2-Knife Trimmer User Manual 11