Konica Minolta bizhub PRESS 1250 EF-102 User Guide - Page 14

bizhub PRESS 1250/1250P/1052

2-4

2.2

Installation Procedures

2

7

Hold the lever [M8] and open the reversing paper exit unit

to the direction of arrow.

8

Rotate the lock screw (purple) to the direction of arrow to

release the lock.

9

Holding the handles on the front [1] and rear [2] of the fus-

ing unit with both hands, slide the unit to the direction of

arrow, and then pull it up to remove it.

Be careful in handling the fusing unit because it may be

very hot.

10

Holding the handles on the front [1] and rear [2] of EF-102

with both hands, set the unit to the correct position, and

then slide it to the direction of arrow until it knocks in place.

11

Push in the lock screw (purple) and rotate the screw to the

direction of arrow to lock the unit.

Section	Page
1 Introduction	5
1.1 Introduction	5
1.2 Safety Precautions	6
1.2.1 Notices for Safety	6
1.2.2 Precautions When Replacing Units	7
1.2.3 Caution Labels and Indicators	9
2 Installing Fusing Unit EF-102	12
2.1 Replacement Parts	12
2.2 Installation Procedures	13
2.2.1 Installing EF-102 on the Main Body	13
2.2.2 Installing Parts in the Tray	15
3 Removing Fusing Unit EF-102	19
3.1 Removal Procedures	19
3.1.1 Removing EF-102 from the Main Body	19
3.1.2 Removing Parts from the Tray	21
4 Copy/Print Operation	25
4.1 Loading Envelopes in the Tray	25
4.2 Copy Operation	26
4.3 Print Operation	30
4.4 Adjustment	37
5 Specifications	40

Konica Minolta bizhub PRESS 1250 EF-102 User Guide - Page 14

Holding the handles on the front [1] and rear [2] of EF-102

Page 14 highlights