Konica Minolta bizhub PRESS 1250 EF-102 User Guide - Page 17
Using Envelopes of 141 to 245 mm in Width, Regulation guide/Rear
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
2.2 Installation Procedures 2 6 Install the 2 duct covers. % Be sure to install both of the duct covers on the outside. Wedge the resin member between the tabs of the duct cover to install the covers as illustrated below. 7 Push in the tray until it locks into place. Using Envelopes of 141 to 245 mm in Width The following parts need to be installed when envelopes of the above size are used. - Regulation guide/Front - Regulation guide/Rear 1 Pull out the tray. 2 Install the regulation guides (front/rear) onto the top of the small size guides (front/rear). % Be sure to install the regulation guides by pushing them to the direction of arrow. 3 Push in the tray until it locks into place. bizhub PRESS 1250/1250P/1052 2-7
bizhub PRESS 1250/1250P/1052
2-7
2.2
Installation Procedures
2
6
Install the 2 duct covers.
%
Be sure to install both of the duct covers on the out-
side. Wedge the resin member between the tabs of the
duct cover to install the covers as illustrated below.
7
Push in the tray until it locks into place.
Using Envelopes of 141 to 245 mm in Width
The following parts need to be installed when envelopes of the above size are used.
-
Regulation guide/Front
-
Regulation guide/Rear
1
Pull out the tray.
2
Install the regulation guides (front/rear) onto the top of the
small size guides (front/rear).
%
Be sure to install the regulation guides by pushing them
to the direction of arrow.
3
Push in the tray until it locks into place.