Konica Minolta bizhub PRESS 1250 EF-102 User Guide - Page 16
To insert the auxiliary guides front/rear into the holes, in the bottom plate of the tray
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
2.2 Installation Procedures 2 2 Remove the 4 screws, and then install the 4 positioning screws instead. 3 Open the small size guides (front/rear) to the direction of arrow to set the guides to the positions illustrated below. 4 Install the auxiliary guides (front/rear) and secure them with 2 stoppers. % To insert the auxiliary guides (front/rear) into the holes in the bottom plate of the tray, move the side guides to align the notches in the bottom tray. 5 Move the 2 duct lock levers to the direction of arrow to lock them. bizhub PRESS 1250/1250P/1052 2-6
bizhub PRESS 1250/1250P/1052
2-6
2.2
Installation Procedures
2
2
Remove the 4 screws, and then install the 4 positioning
screws instead.
3
Open the small size guides (front/rear) to the direction of
arrow to set the guides to the positions illustrated below.
4
Install the auxiliary guides (front/rear) and secure them with
2 stoppers.
%
To insert the auxiliary guides (front/rear) into the holes
in the bottom plate of the tray, move the side guides to
align the notches in the bottom tray.
5
Move the 2 duct lock levers to the direction of arrow to lock
them.