Konica Minolta bizhub PRO C1060L bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1
Konica Minolta bizhub PRO C1060L Manual
View all Konica Minolta bizhub PRO C1060L manuals
Add to My Manuals
Save this manual to your list of manuals |
Konica Minolta bizhub PRO C1060L manual content summary:
- Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 1
Quick Guide EFI Controller 1 Before Getting Started 2 Let's Make Prints 3 Installing Software 4 Basic Operations 5 Maintaining the Finishing Quality 6 Troubleshooting 7 Appendix - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 2
, maintenance, troubleshooting for this machine. This information will be useful to enable the full capabilities of this machine and to utilize such functionality efficiently. Notations and symbols used in this manual WARNING This symbol indicates that negligence of the instructions may lead - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 3
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L Configuration and Usage of this Guide There are two types of User's Guides for this machine: booklet manuals and User's Guide CD. When you want to learn about detailed functions or operation procedures, refer to the HTML User's Guide included in the - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 4
Usage of this Guide HTML User's Guide operating environment )Supported Operating Systems/Browsers This guide describes the operation may not work normally depending on your system environment. Please be forewarned. - Problems may be able to be solved by using the latest Web browser. )Display - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 5
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L Conventions used in this guide This guide describes product names and system configurations as follows. Product name bizhub PRESS C1070/C1070P/C1060, bizhub PRO C1060L bizhub PRESS C1070P Microsoft Windows Conventions used in this guide This - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 6
Make a Note about This Machine Information Make a Note about This Machine Information Checking the mounted optional devices Get to know the optional devices mounted on this machine. You can check a part of the mounted optional devices on the [MACHINE] screen of the touch panel. Select the check - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 7
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L Checking network information Make a note about network Contact your machine administrator. NOTICE Some notes may include confidential information. Handle this guide with great care. In particular, do not enter information such as the password. - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 8
Contents Contents Configuration and Usage of this Guide x-i HTML User's Guide operating environment x-ii Supported Operating Systems/Browsers x-ii Display resolution x-ii How to display the top page of the HTML User's Guide x-ii In a Windows environment x-ii In a Macintosh environment x-ii - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 9
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L In a Macintosh environment 3-8 Installation 3-8 Default setting 3-11 3.2 Installing 5-15 Auto setting of Color Density Control 5-15 Manual setting of Color Density Manual Control 5-18 Executing calibration using the image controller 5-20 - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 10
Contents 6 Troubleshooting 6.1 Replenish and Replace Consumables 6-1 Replacing a toner bottle 6-1 Replacing a staple cartridge 6-3 Replacing a waste toner box 6-5 6.2 Clearing Paper Jams 6-7 How to view the animation guide 6-7 [JAM Position] screen 6-7 Illustration screen for Jam - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 11
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L Authentication Unit AU-201 7-35 Original-related optional devices 7-36 Reverse Automatic Document Feeder DF-626 7-36 7.5 Weight for each size and copying - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 12
screen has been displayed, the default screen is displayed. The default screen can be selected from Utility/Counter. For details, refer to the HTML User's Guide. When [Ready to print] is displayed on the [MACHINE] screen, you can use this machine. 1-1 - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 13
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L $ Turn the image controller on. - For Image Controller IC-415, turn the power switch in the rear side on ( ), then press the button on the top of the power switch ( ). - For Image Controller IC-308, turn the power switch in the rear side on ( ), - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 14
Power ON/OFF )Turning the power off (Image Controller IC-415) " On the [MACHINE] screen, press [Con- troller Setting]. # Press [Login]. $ Select [Administrator] or [Operator], en- ter the password, then press [Login]. The default password is "Fiery.1". If you select [Operator], you do not need to - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 15
the [Tools] tab. bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L & Press [Restart Server]. ' Press [Shut Down System]. ( If [Shutting down... ] is displayed, press [x]. NOTICE While the following message is displayed, do not quit the system. Otherwise, a problem such as a toner fixation in - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 16
1.1 Turning the Power ON/OFF ) After the system has quit, turn the sub power switch off. ON The touch panel display goes off, and the Power LED on the control panel is changed from green to red. OFF * Turn off the main power switch. NOTICE When turning the main power switch off then on, be sure to - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 17
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L )Turning off the power (Image Controller IC-308 While the following message is displayed, do not turn off the main pow- er switch. Otherwise, a problem such as a toner fixation in the machine may occur. [Cooling in progress / Power is turned off - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 18
/OFF Tips Tips - The Image Controller IC-308 can reset Fiery software or restart the entire system as needed. - To reset only the Fiery software, press the Menu button on the control panel, then use the row selection button to select [Restart Server] - [Restart Server] in sequence. In this case, do - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 19
bizhub PRESS C1070/C1070P/C1060 bizhub • Power Save on the control panel has been pressed for a sec- ond or more This mode is • Power Save on the control panel has been pressed for a sec- ond or more If the Auto - If Power Save on the control panel is pressed for one second or more, either of Auto Low - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 20
1.1 Turning the Power ON/OFF NOTICE In the Auto Shut OFF mode, only jobs from [PageScope Direct Print (PSDP)] can be printed out. To use other jobs, check that this machine can be used normally. If this machine is turned off because the Weekly Timer has started, job data is not received even if it - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 21
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L 1.2 Available Operations in this Machine Major functions of this machine )Print functions This machine can be used as a printing system by installing an - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 22
original data as an E-mail attachment, or send it to a shared computer (SMB server) or the FTP server. In addition, you can give a scan instruction from a computer on the network to import the scanned original data to your computer. Tips Tips Scan functions are not available in the Printer model - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 23
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L Application functions )Fiery Command WorkStation Fiery Command WorkStation is an application that manages jobs and image controller via the network. Job management function - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 24
For details about how to use this application, refer to the User's Guide supplied with the EFI controller. )Fiery Bridge Fiery Bridge is an application For details about how to use this application, refer to the User's Guide supplied with the EFI controller. )Fiery Hot Folders Fiery Hot Folders is - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 25
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L 2 Let's Make Prints This chapter describes a operations or setting procedures are described in the reference page for each step. Tips Tips The User's Guide CD supplied with this machine includes a sample PDF file for printing. This file is helpful if - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 26
4: Use the printer driver to print data Print original data through your computer. 0 Check the application environment of original data in advance. This guide shows a procedure example of how to use Microsoft Word 2010 in a Windows 7 environment. " Click [Print] on the file menu of the application - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 27
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L $ Click the [Quick Access] tab on the setting vary depending on where print jobs are saved on the HDD. For details, refer to the User's 2 Guide supplied with the EFI controller. - For information about how to take an action when data is printed - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 28
recommended for your operating system Memory capacity as recommended for your operating system The memory must have a sufficient free space to support the operating system and required applications. DVD drive )In a Macintosh environment Item Operating System CPU Memory Drive Specifications Mac OS - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 29
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L In a Windows environment )Installation Use the Add Printer Wizard to install the printer driver on your computer. This guide listed] - [Add a local printer or network printer with manual settings], then click [Next]. - In Windows Vista/Windows - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 30
3.1 Installing the Printer Driver ' In [Type of port:], select [Standard TCP/IP Port], then click [Next]. ( Enter the host name or IP address, then click [Next]. ) Click [Have Disk]. * Click [Browse]. 3-3 - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 31
+ Select [oemsetup.inf] of the User Soft- ware DVD, then click [Open]. bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L , Click [OK]. - Select the name of the printer to be in- stalled, then click [Next]. . Enter the printer name, then click [Next]. If - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 32
3.1 Installing the Printer Driver / Select [Do not share this printer], then click [Next]. When using Windows Server 2008/Windows Server 2003 as a printer server, click [Share this printer so that others on your network can find and use it], then enter the share name. 0 When printing a test page, - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 33
2 Confirm that the printer name is dis- played in [Devices and Printers]. Then, configure the default setting for the printer driver. For details, refer to page 3-7. bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L 3 3-6 - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 34
3.1 Installing the Printer Driver )Default setting Check that optional information of this machine is configured correctly on the printer driver. 0 If optional information of this machine is not configured correctly on the printer driver, you cannot use optional functions. If any optional function - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 35
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L In a Macintosh environment )Installation Install the printer driver on your computer from the User Software DVD supplied with this machine, then add the desired printer to the computer. This guide Follow the on-screen instructions to click [Continue]. - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 36
3.1 Installing the Printer Driver ( Select the name of the printer to be in- stalled, then click [Continue]. ) Enter the printer name, then click [In- stall]. * When the installation is completed, click [Finish]. To set to a daily-used printer, select the [Set as default] check box. Then, add a - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 37
, Click [+]. bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L - Click [Default]. Connected printers are detected. If no printer is detected, restart this machine. . Specify the Bonjour-connected printer to be added in - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 38
3.1 Installing the Printer Driver 0 Configure optional information of this machine, then click [OK] or [Continue]. Then, configure the default setting for the printer driver. For details, refer to page 3-11. )Default setting Check that optional information of this machine is configured correctly on - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 39
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L 3.2 Installing recommended for your operating system The memory must have sufficient free space to support the operating system and applications. 1024 e 768 pixels or more DVD drive refer to the User's Guide supplied with the EFI controller. 3-12 - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 40
3.2 Installing Applications In a Windows environment )Installation Start the installer from the User Software DVD supplied with this machine, then install Fiery Utility on your computer. 0 To install, the computer's administrator privilege is required. " Insert the User Software DVD into the DVD - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 41
' Confirm the program folder name, then click [Next]. bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L ( To automatically start Fiery Command WorkStation when logging on to the compu- ter, click [Yes]; otherwise, click [No]. ) Check the total size of - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 42
with this machine, then install Fiery Utility on your computer. This guide describes how to install Fiery Command WorkStation. " Insert the User [EFI Hot Folders.mpkg]. $ Select the [I agree to the EFI Terms Of Service] check box. % Click [Install]. The screen for entering [Name] and [Password - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 43
has been complet- ed, click [Close]. Installation is completed. bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L Starting applications )Starting Fiery Command WorkStation To start Fiery search for the desired Fiery. For details, refer to the User's Guide supplied with the EFI controller. 3 3-16 - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 44
3.2 Installing Applications $ Click [Connect]. % Select the user privileges, then enter the password. - For user privileges, you can select the following items. Administrator: Can perform all operations. Operator: Can only perform job operations. Guest: Can view information only. - The default - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 45
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L )Starting Fiery Remote Scan To start Fiery Remote Scan, first select to search for the desired Fiery. For details, refer to the User's Guide supplied with the EFI controller. $ Click [Connect]. Fiery Remote Scan starts, and you can import a scan - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 46
3.2 Installing Applications )Starting Fiery Bridge To start Fiery Bridge, first select a Fiery to be connected. " Start Fiery Bridge. - In Windows 7/Windows Vista/Windows Server 2008 R2/Windows Server 2008/Windows XP/Windows Server 2003, open the Start menu, then click [All Programs] - [Fiery] - - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 47
4 Basic Operations bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L 4.1 Loading Paper Loading another machine trouble may occur. # Open the feed roller. $ Turn two side guide lock knobs (in the front and rear sides) counterclockwise to loosen them. % While pressing the side guide lock release - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 48
while aligning it to the right-hand side of the tray. NOTICE Load paper with the print side facing down. ( Press the side guide plate against the paper, then turn two side guide lock knobs (in the front and rear sides) clockwise to fix them. ) Load the remaining paper into the tray, then - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 49
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L Loading paper into the Paper Feeder Unit For information about how to load paper into other optional paper feeder unit, refer to the HTML User's Guide. " Pull out the tray to load paper into. NOTICE Trays can be pulled out only when this machine - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 50
(support guides), refer to the HTML User's Guide. Be sure that the rear guide plate is securely pressed against the paper. If there is any gap between the rear guide plate and the paper, this machine will not be able to detect the correct paper size. It may cause a paper feeder machine trouble - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 51
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L 4.2 Paper Setting Specifying paper information for a tray . To load custom-size paper, specify the required size. " Press [Paper Setting] on the [MACHINE] screen. You can also press [Paper Setting] on the [COPY] screen to specify the required - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 52
4.2 Paper Setting % Press [Paper Size]. & Select one of the options under Size Setting to fit the paper loaded into the tray. 4-6 - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 53
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L ' Specify the size. [Standard]: Recognized automatically. In [Detect Size Setting], you can select the size to be detected. There is, however, a group of - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 54
Paper]: Specify the paper size and the number of tabs. ( If you select [Detect Size Setting] in [Standard], press [OK]. This returns to the [Size Setting] screen. This step is not required if you select [Custom] or [Tab Paper]. ) Press [OK]. This returns to the [Change Individual Set] screen. 4-8 - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 55
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L + Press [OK]. This returns to the [Paper Setting] screen. , Press [Close]. This returns to the [MACHINE] screen. If you press to the HTML User's Guide. 4 Tips Tips To register paper conditions in a paper profile, press [Register]. For details - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 56
details, refer to page 5-20. The color mode can also be specified in [Color Setup] of Fiery Command WorkStation. For details, refer to the User's Guide supplied with the EFI controller. 4-10 - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 57
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L )[Color Mode]: General To specify the basic defaults for color processing, open [Color] in the Fiery Command WorkStation to configure [Basic Settings] in the color mode. For details, refer to the User's Guide supplied with the EFI controller. 4 4-11 - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 58
. Reference You can also select [Color Setup] of Fiery Command WorkStation to configure [Expert Settings] in the color mode. For details, refer to the User's Guide supplied with the EFI controller. 4-12 - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 59
bizhub PRESS C1070/C1070P/C1060 bizhub ] on the [MACHINE] screen. This guide describes how to enter from [Paper Setting refer to the HTML User's Guide. Adjustment flow Follow the procedure refer to the HTML User's Guide. # Making the Both Sides to the HTML User's Guide. NOTICE A high technical - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 60
about how to edit or register a paper profile, refer to the HTML User's Guide. )Chart Adjustment You can print out a Both Sides Adjustment chart, measure measurement points to change paper in a tray. " Press [Paper Setting] on the [MACHINE] screen. # Select the tray with the target paper - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 61
$ Press [Both Sides Adj]. bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L % Select [Front], then press [Chart Adjust- ment]. & Press [Print Mode]. ' When the [PRINT MODE] screen is dis- played, press Start on the control panel. A test chart is printed out. 5 5-3 - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 62
5.1 Both Sides Adjustment ( Press [Exit Print Mode]. ) Measure the line length at each of points [1] to [8] on the printed-out chart using a scale. - The figure on the right illustrates - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 63
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L * Press each point number, then enter the measured length using the keypad, [,], or [+] on the screen or the Keypad on the control panel. - To reset a value, press [Clear]. + When entry processing is completed, press [Adjustment Start]. In the next - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 64
5.1 Both Sides Adjustment - Press [Print Mode]. . When the [PRINT MODE] screen is dis- played, press Start on the control panel. A test chart is printed out. / Press [Exit Print Mode]. 5-6 - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 65
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L 0 Measure a misalignment between the marks of the Y direction. - Write down the measured values so that you do not forget them. back x y 1 Press [X] or [Y] at each point, then enter the measured value using the keypad, [,], or [+] on the screen - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 66
value, continuously proceed to step 4 in "Zoom and Image Shift Adjustment" (page 5-9). 4 Press [Close] to exit the adjustment. Chart Adjustment is then completed. - To register adjustment values in a paper pro- file, press [Register]. - For details about how to register a paper pro- file, refer to - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 67
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L )Zoom and Image Shift Adjustment You can finely adjust the zoom ratio adjustment after the chart adjustment or you have the duplex printing result. " Press [Paper Setting] on the [MACHINE] screen. # Select the tray with the target paper loaded, then - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 68
- [Common Setting], then set [Back Side Magnification Adj.] to [OFF]. For details, refer to the HTML User's Guide. - To move the print side upward, downward, leftward, or rightward (image shift), press [Up/Down] or [Right/Left], then enter the value. To move the print side upward or rightward, enter - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 69
]. bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L ( Press [Close] to exit the adjustment. Zoom and Image Shift Adjustment is then completed. - To register adjustment values in a paper profile, press [Register]. - For details about how to register a paper profile, refer to the HTML User's Guide - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 70
has been carried out several times, readjust the reference position on the print side. For details about the adjustment procedure, refer to the HTML User's Guide. 5-12 - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 71
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L 5.2 Image Quality Adjustment Image Quality adjustment Adjust the color image quality at periodic intervals to maintain consistent printing results against a change in ambient - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 72
5.2 Image Quality Adjustment Daily image quality management (Calibration) The color image quality can be maintained by executing calibration at the appropriate timing. Specify the reference value (target) of the entire printing system in advance, then use this reference value to correct the - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 73
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L )Executing calibration The calibration method varies [Gamma Automatic Adj.], [Maximum Density Adjustment], or [Color Density Manual Control] added. For details, refer to the HTML User's Guide. Color Density Control If an optional Relay Unit RU-509 is - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 74
Use Color Density Control]: [ON] - [Periodical Adj. Execution]: [ON] - [Adjustment Execution Timing]: [Before Job Start] - [Chart Tray Setting]: [OFF] & Press [Next]. ' Specify each item as follows: [Switch Color (1st or 2nd)]: [Precise] NOTICE Select [Precise] or [Normal] depending on the situation - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 75
( Press [OK]. bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L ) Press [Close]. * Press [Exit [ADJUSTMENT]]. Automatic Adjustment is set. A chart is printed out periodically, and calibration is carried out automatically. Tips Tips Selecting [Color Density Manual Control] can carry out the manual - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 76
5.2 Image Quality Adjustment )Manual setting of Color Density Manual Control " Press [Adjustment] on the [MACHINE] screen. # Press [Color Density Control]. $ Press [Color Density Manual Control]. This function is available only when [Use Color Density Control] is set to [ON] in [Color Density - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 77
% Press [Print Mode]. bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L & Press [Quality Adj.]. ' Press [)] of [Screen Pattern] to select a screen. ( Press [Close]. 5 5-19 - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 78
5.2 Image Quality Adjustment ) Press Start. A chart is printed out, and calibration is to your computer. For information about EFI Spectrometer ES-1000 setting and adjustment, refer to the manual supplied with this machine. # Start Fiery Command WorkStation. For information about how to start this - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 79
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L ' Click [OK]. ( Securely place EFI Spectrometer ES- 1000 in the calibration cradle, then click [Continue]. ) Load the measurement page on the measurement guide plate. * Follow the instructions to the manual supplied with this machine. 5 5-21 - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 80
5.2 Image Quality Adjustment + In the same way, measure all colors. - When a strip is measured successfully, a check mark is displayed at the side of the color name, and is displayed for the color to be measured next. - Measure colors in the order displayed in the measurement screen. , When all the - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 81
bizhub PRESS C1070/C1070P/C1060 bizhub against the in- HTML User's ic Adj. put density. Guide This affects the brightness and contrast. On the [MACHINE] screen automatically at periodic inter- mounted) vals. Color Density Manual Control Executes calibration at any timing in addition to - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 82
out the adjustment. Executes manual calibration when the Relay Unit RU-509 is not mounted on this machine. Use Fiery Command WorkStation. HTML User's Guide HTML User's Guide p. 5-15 p. 5-20 Reference For details about the adjustment procedure, refer to the HTML User's Guide. NOTICE Precautions on - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 83
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L 5.3 Adjusting the Finisher and Saddle Stitcher Opening the screen to be adjusted When the finisher staple positions. Reference For details about how to adjust the finisher, refer to the HTML User's Guide. " Press [Adjustment] on the [MACHINE] screen - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 84
5.3 Adjusting the Finisher and Saddle Stitcher $ Press the items to be adjusted. The items displayed on device. For details about the setting procedure, refer to the HTML User's Guide. Setting item [Staple Finisher Adjustment] Description Adjusts stapler operations such as staple positioning - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 85
[Punch Adjustment] [Tri-Fold Adjustment] [2 Pos. Staple Pitch Adj.] [Post Inserter Tray Size] [Output Quantity Limit] [Curl Adjustment] bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L Description Adjusts the saddle stitcher stopper position. Adjusts the half-fold stopper position. Adjusts punch - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 86
6.1 Replenish and Replace Consumables 6 Troubleshooting 6.1 Replenish and Replace Consumables )Replacing a toner bottle WARNING WARNING Do not throw the toner bottle or toner into an open flame. The hot toner may - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 87
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L NOTICE To replace a toner bottle, check the toner type number indicated on the toner bottle cover. Use of incorrect toner bottles may cause the machine trouble. " Press on the upper-right corner of the touch panel or Help on the control panel to - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 88
then place it into the package. For the subsequent treatment, contact your service representative. )Replacing a staple cartridge If staples run out, the message replace staple cartridges, refer to the HTML User's Guide. " Press on the upper-right corner of the touch panel or Help on the - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 89
[Consumable/Scrap]. bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L $ Press the [Add Stapler] tab of the required saddle stitcher, then follow the on-screen instructions to replace a staple cartridge. The number on the right-hand side of the help message indicates a replacement procedure. To - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 90
replace the box] is displayed on the [MACHINE] screen, and the [Waste Toner Box] indicator changes to red in the [Consumable and Scrap Indicators] display. " Press on the upper-right corner of the touch panel or Help on the control panel to display the help message. 6-5 - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 91
Press [Consumable/Scrap]. bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L $ Press the [Waste Toner] tab, then follow the on-screen instructions to replace the waste toner box. The number on the right-hand side of the help message indicates a replacement procedure. To display the next step, press - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 92
, the message [Mishandled paper / Please remove paper following the guide] is displayed, and the position of the paper jam is displayed, and the position of the paper jam is indicated by a number. Tips Tips - Pressing [Close] changes to the [MACHINE] screen. - Even while the [MACHINE] screen is - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 93
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L )Illustration screen for Jam handling The overview of the method required to clear the jam is displayed on the [JAM Position] screen. Changing - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 94
Clearing Paper Jams % Remove all jammed paper, then press [Close]. This returns to the [MACHINE] screen. touch panel. If you cannot smoothly remove jammed paper, do not remove it forcibly. Contact your service representative. - Open and close the door of the part indicated by the number on the touch - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 95
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L 6.3 If the Specified Paper is not Found If paper of the specified paper size is not loaded on a tray at the time of printing, [Controller] is displayed in red. To address this problem, load the specified paper into a tray, or you can forcibly print - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 96
6.3 If the Specified Paper is not Found % Press [Force Print]. & Press the tray in which print sheets are loaded. Printing starts using the selected tray. 6-11 - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 97
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L 6.4 If an Error has been Displayed during Scanning If a problem such as an HDD space insufficiency has occurred, an error message is displayed. Check the message content, then take the appropriate action. This section describes - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 98
intervals. To configure this setting, select [Administrator Setting] - [Security Setting] - [HDD Management Setting] - [Hold Job Auto Delete Period]. For details, refer to the HTML User's Guide. 6-13 - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 99
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L 6.5 Hue Adjustment Various problems, for example, the current hue is different from the previous one or the expected chromogenic effect has changed the screen or paper, make the advanced adjustment. For details, refer to the HTML User's Guide. 6 6-14 - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 100
6.6 Image Position Adjustment 6.6 Image Position Adjustment The previously adjusted image position may be misaligned by a slight enlargement or reduction of paper that is caused due to a change in ambient temperature or humidity, a change of the machine conditions, usage of a different type of paper - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 101
7 Appendix bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L 7.1 Good Use of the HTML User's Guide The HTML User's Guide is included in the User's Guide CD supplied with this machine. Select the desired item on the top page (Home), then check the detailed contents. To view the details about how - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 102
of power. Displays a screen such as the [MACHINE] screen to enable you to carry out machine operations and settings. Also, operation or troubleshooting procedures can be provided. Performs operations or configures settings. Open when adding toner. Open when handling a paper jam. Up to 500 sheets - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 103
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L 11 13 14 23 22 21 20 15 12 19 18 16 17 No. Name Description 11 Dust proof filter A dust proof filter - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 104
door 7-4 12 10 Description Turns the main power of the machine on or off. The main power is basically turned on or off by your service representative. Be sure not to turn the main power switch off in usual operation. Open when adding toner. - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 105
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L No. Name 3 Toner bottle cover (Y, M, C, K) 4 Drum unit 5 Conveyance fixing unit 6 Lever [M1] 7 Fixing unit 8 side guide lock knobs 9 Rear guide plate 10 Side guide plates 11 Feed roller 12 Side guide lock release lever Description - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 106
7.2 Name of each Component Control Panel Layout 20 19 18 17 16 No. Name 1 Keypad 2 Reset* 3 Power LED 4 Data LED 5 Interrupt* 6 Stop 7 Proof Copy* 8 Start 1 2 3 4 5 6 7 15141312 11 10 9 8 Description Enter the values such as the number of copies or the zoom ratio. Returns the - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 107
LED bizhub PRESS C1070/C1070P/C1060 bizhub PRO panel screen. Releases the power-saving mode. Also, press this button to manually place this machine into the power-saving mode. the Service Call Screen is displayed and output cannot be contin- ued any more. - Otherwise, an unexpected trouble may - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 108
file transfer in order to share it. Tips Tips Mac OS X 10.7 or later does not support the Scan to SMB function. Instead, use Scan to FTP. For details, refer to the HTML User's Guide. Step 1: Prepare the destination computer In Step 1, execute the following tasks: - To check the destination computer - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 109
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L # Check the user name. - For Image Controller 2003, select [All Programs] - [Accessories] and open [Command Prompt]. Then, type in "set user" and press the [Enter] key. In Windows 8, right-click the Start window, click [All apps], and open [Command - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 110
the default setting). Tips Tips For details, refer to the HTML User's Guide. Step 4: Configure settings according to your environment Register destinations that are frequently used. - This can save many steps to manually enter destinations. - Select [Scan] tab of this machine to register the SMB - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 111
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L Step 5: Send scan data to a public folder Send scan data to a public folder of the registered SMB server. In the [Scan] tab of this machine, select an SMB destination, configure [Scan Settings], then press Start. Tips Tips For details about scan - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 112
devices are not supported in certain factory setting. For JIS/ISO switching, contact your service representative. You can change the detectable standard size. Counter screen to detect the K size. For details, refer to the HTML User's Guide. *Foolscap refers to 8.5 e 13 w, 8.25 e 13 w, 8.12 e 13 - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 113
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L Feeding-related optional devices Reference The paper size and weight vary depending on conditions such as setting or finishing. For details about the detailed conditions or specifications, refer to the HTML User's Guide. )Paper Feeder Unit PF-602m - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 114
service representative. You can change the detectable standard size. Also, you can select [ON] from [K Size] on the Utility/Counter screen to detect the K size. For details, refer to the HTML User's Guide. If the paper width is less than 139.7 mm / 5.5", use the small size guides (support guides - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 115
Capacity Unit LU-202 Paper tray bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L Specifications Paper weight Paper are used for B series in the factory setting. For JIS/ISO switching, contact your service representative. You can change the detectable standard size. Also, you can select [ON] from - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 116
in the factory setting. For JIS/ISO switching, contact your service representative. You can change the detectable standard size. Also, you on the Utility/Counter screen to detect the K size. For details, refer to the HTML User's Guide. *Foolscap refers to 8.5 e 13 w, 8.25 e 13 w, 8.12 e 13.25 w, or - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 117
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L )Post Inserter (Folding Unit FD-503) or fold function for paper to be fed from the lower tray. For details, refer to the HTML User's Guide. Paper tray 1 2 1: Upper tray 2: Lower tray Specifications Paper weight Paper size Storage capacity 50 g/m2 to - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 118
function for paper to be fed from the lower tray (the configurable function varies depending on finisher models). For details, refer to the HTML User's Guide. Paper tray 21 1: Upper tray 2: Lower tray Specifications Paper weight Paper size Storage capacity 50 g/m2 to 200 g/m2 / 13 lb Bond to 53 lb - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 119
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L Output-related optional devices Reference The paper size and weight vary depending on conditions such as setting or finishing. For details about the detailed conditions or specifications, refer to the HTML User's Guide. )Relay Unit RU-509 Conveyance - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 120
7.4 Major Specifications Specifications Paper size )Folding Unit FD-503 Output tray 2 1 • SRA3 w, A3 w, B4 w, SRA4 w/v, A4 w/v, B5 w/v, A5 w/v, A6 w, 13 e 19 w, 12 e 18 w, 11 e 17 w, 8.5 e 14 w, 9 e 11 v, 8.5 e 11 w/v, 5.5 e 8.5 w/v, 8K w, 16K w/v, Foolscap* • Tab Paper: A4T v, 8.5 e 11T v • - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 121
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L Specifications: Half-Fold, Tri-Fold-in, Tri-Fold-out, Z-Fold, Gate, Double Parallel Fold Paper weight Primary (main) tray • Half-Fold, Tri-Fold- - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 122
7.4 Major Specifications )Large Capacity Stacker LS-505 Output tray Specifications Function Paper weight Paper size • Stacker tray with carriage • Sort output / group output (Offset output enabled) Stacker tray: 50 g/m2 to 244 g/m2 / 13 lb Bond to 65 lb Bond Secondary (sub) tray: 40 g/m2 to 350 g/ - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 123
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L )Saddle Stitcher SD-506 Output tray Function Fold & Staple Multi Half-Fold Multi Tri-Fold Multi Half-Fold + Trimming Specifications: Fold & Staple Paper - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 124
7.4 Major Specifications Specifications: Trim Paper weight Paper size Maximum number of trimmed sheets 50 g/m2 to 244 g/m2 / 13 lb Bond to 65 lb Bond • SRA3 w, A3 w, B4 w, SRA4 w, A4 w, B5 w, 12 e 18 w, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w, 7.25 e 10.5 w, 8K w, 16K w, Foolscap* • Custom: Width 182 mm - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 125
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L )Finisher FS-531 To use the punch function, the Punch Kit PK-512 or Punch Kit PK-513 is required. Output tray 12 - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 126
7.4 Major Specifications Specifications: Staple Paper weight Paper size 60 g/m2 to 209 g/m2 / 15 lb Bond to 56 lb Bond • A3 w, B4 w, SRA4 w, A4 w/v, B5 w/v, A5 v, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w/v, 7.25 e 10.5 w/v, 5.5 e 8.5 v, 8K w, 16K w/v, Foolscap* • Tab Paper: A4T v, 8.5 e 11T v • Custom: - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 127
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L )Finisher FS-532 To use the punch function, the Punch Kit PK-522 is required. Saddle Stitcher SD-510 is required to use - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 128
7.4 Major Specifications Specifications: Staple Paper weight Paper size 50 g/m2 to 300 g/m2 / 13 lb Bond to 81 lb Bond • SRA3 w, A3 w, B4 w, SRA4 w/v, A4 w/v, B5 v, A5 v, 13 e 19 w, 12 e 18 w, 11 e 17 w, 9 e 11 v, 8.5 e 14 w, 8.5 e 11 w/v, 7.25 e 10.5 v, 5.5 e 8.5 v, 8K w, 16K v, Foolscap* • Tab - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 129
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L Specifications: Punch (with Punch Kit PK-522 installed) Number of punch holes • Metric area: 2 holes/4 holes • Inch area: 2 holes/3 holes Hole diameter 6.5 mm / 0. - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 130
7.4 Major Specifications )Finisher FS-612 To use the punch function, the Punch Kit PK-512 or PK-513 is required. Output tray 2 1 Function Staple Fold & Staple 3 1: Primary (main) tray 2: Secondary (sub) tray 3: Fold/Staple mode tray Punch Multi Half-Fold Tri-Fold Specifications: Straight - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 131
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L Specifications: Staple Paper weight Paper size Sheet volume 60 g/m2 to 105 g/m2 / 16 lb Bond to 28 lb Bond • A3 w, B4 w, SRA4 w, - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 132
28 lb Bond) • Number of loadable sheets in Tri-Fold: Approx. 50 sheets * Up to 3 sheets can be changed. For more information, contact your service representative. Specifications: Punch (with Punch Kit PK-512 or PK-513 installed) For the punch function specifications, refer to the specifications of - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 133
)Multi Puncher GP-501 Conveyance Unit Function Punch bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L Specifications Function Paper weight Paper size The punch-hole pattern varies according to the die set. For details, refer to the HTML User's Guide. Bypass mode • Transports paper without punch - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 134
7.4 Major Specifications )Auto Ring Binder GP-502 Binder Unit Function Bind Specifications Paper weight Book size (sheets) Bypass sheet size/weight Body: 75 g/m2 to 120 g/m2 / 20 lb Bond to 32 lb Bond Cover: 163 g/m2 to 216 g/m2 / 44 lb Bond to 57 lb Bond Tabbed paper: 163 g/m2 max. / 44 lb - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 135
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L Electronic optional devices Reference For information about optional devices not described below, refer to the HTML User's Guide. )Image Controller IC-602 Specifications Function Capacity Built-in fonts Page description language Built-in image - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 136
7.4 Major Specifications Original-related optional devices )Reverse Automatic Document Feeder DF-626 This device does not support the Printer Model. Document Feeder Specifications Function Original type Original size Storage capacity • 1-sided original feeding • 2-sided original feeding • 1-sided - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 137
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L 7.5 Weight for each size and copying speed NOTICE The product specifications are subject to a change without to the following list. Reference For details about [Weight], [Process Adjustment] and [Glossy], refer to the HTML User's Guide. 7 7-37 - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 138
7.5 Weight for each size and copying speed bizhub PRESS C1070/C1070P Temperature detected by Humidity/Temperature Sensor 17°C or higher Lower than 17°C Paper weight (g/m2 / lb Bond) 1-minute copying speed (at 1-sided output with plain - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 139
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L bizhub PRESS C1060 bizhub PRO C1060L Temperature detected by Humidity/Temperature Sensor 17°C or higher Lower than 17°C Paper weight (g/m2 / lb Bond) 1-minute copying speed (at 1-sided output - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 140
shows the maximum paper size and printing area for Tray 2 (Main body lower tray). For information about other paper trays, refer to the HTML User's Guide. 487.7 mm / 19.20" Maximum printing area Crosswise direction: 323 mm / 12.72" Paper feed direction: 480 mm / 18.9" 7-40 - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 141
MEMO bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L 7 7-41 - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 142
MEMO 7-42 - Konica Minolta bizhub PRO C1060L | bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 143
http://www.konicaminolta.com A50U958101 © 2013 Printed in China 2013. 8
Before Getting Started
Let's Make Prints
Installing Software
Basic Operations
Maintaining the Finishing Quality
Troubleshooting
Appendix
1
2
3
4
5
6
7
EFI Controller
Quick Guide