Konica Minolta bizhub PRO C1060L bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 19
Power saving function
View all Konica Minolta bizhub PRO C1060L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L )Power saving function Using the following functions can reduce the power consumption of this machine and provide greater power saving effects. Function Description Power Save func- Auto Low Power tion Turns off the touch panel display to reduce the power consumption of this machine. This machine is placed into the Auto Low Power mode when: • The specified period of time has elapsed with no print jobs exe- cuted in the printable state • Power Save on the control panel has been pressed for a sec- ond or more This mode is available when [Auto Low Power] is selected by selecting Utility/Counter - [Administrator Setting] - [System Setting] [Power Save Setting] - [Power Save Function Setting]. There are eight power saving time periods available: 5, 10, 15, 30, 60, 90, 120, and 240 minutes, from which you can select the desired one. Power saving time periods, 90, 120, and 240 minutes, may not be displayed depending on regions. Auto Shut OFF Turns off all LEDs except Power Save and Power LED on the control panel, to reduce the power consumption of this machine. This machine is placed into the Auto Shut OFF mode when: • The specified period of time has elapsed with no print jobs exe- cuted in the printable state • Power Save on the control panel has been pressed for a sec- ond or more If the Auto Shut OFF mode is kept for a long time, it may take a while to warm up this machine upon restart. This mode is available when [Auto Shut OFF] is selected by selecting Utility/Counter - [Administrator Setting] - [System Setting] - [Power Save Setting] - [Power Save Function Setting]. There are seven power saving time periods available: 0, 1, 30, 60, 90, 120, and 240 minutes, from which you can select the desired one. ErP Setting Turns the main power off after the Auto Low Power mode, Auto Shut OFF mode, or the sub power switch is kept in the off state for the specified period of time. 1 There are six power saving time periods available: Do Not Switch, 12, 24, 36, 48, 60, and 72 Hours, from which you can select the de- sired one. If the Weekly Timer is set to [Weekly Timer ON], [ErP Setting] ap- pears dimmed and you cannot configure this setting. Energy-save Mode for Monochrome For monochrome printing, you can carry out it in energy-save mode. Weekly Timer Automatically turns the power of this machine on or off based on the specified time or day of the week. Tips Tips - Utility/Counter - [Administrator Setting] - [System Setting] - [Power Save Setting] - [Power Save Function Setting] is the same as Utility/Counter - [User Setting] - [System Setting] - [Power Save Setting] - [Power Save Function Setting]: use either of the methods to configure a setting. - If Power Save on the control panel is pressed for one second or more, either of Auto Low Power and Auto Shut OFF is enabled. To enable either function, select [Administrator Setting] - [System Setting] - [Power Save Setting] - [Power Save Function Setting]. Reference For details, refer to the HTML User's Guide. 1-8