Konica Minolta bizhub PRO C1060L bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 89
bizhub PRO C1060L, bizhub PRESS C1070/C1070P/C1060, Saddle Stitcher SD-506, Press [Consumable/Scrap].
View all Konica Minolta bizhub PRO C1060L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
# Press [Consumable/Scrap]. bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L $ Press the [Add Stapler] tab of the required saddle stitcher, then follow the on-screen instructions to replace a staple cartridge. The number on the right-hand side of the help message indicates a replacement procedure. To display the next step, press [,]. NOTICE The Saddle Stitcher SD-506 contains two staple cartridges. Check the message, then be sure to pull out the empty cartridge. To remove a staple cartridge, securely hold its right and left sides, and pull it out toward you. To install a staple cartridge, be careful not to mistake the top side for the bottom side. If the top side is facing down, the staple cartridge cannot be inserted. 6 6-4
6-4
bizhub PRO C1060L
6
bizhub PRESS C1070/C1070P/C1060
B
Press [Consumable/Scrap].
C
Press the [Add Stapler] tab of the required saddle stitcher, then follow the on-screen
instructions to replace a staple cartridge.
The number on the right-hand side of the help message indicates a replacement procedure. To display
the next step, press [
,
].
NOTICE
The
Saddle Stitcher SD-506
contains two staple cartridges. Check the message, then be sure to pull out the
empty cartridge.
To remove a staple cartridge, securely hold its right and left sides, and pull it out toward you.
To install a staple cartridge, be careful not to mistake the top side for the bottom side. If the top side is facing
down, the staple cartridge cannot be inserted.