Konica Minolta bizhub PRO C1060L bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 50
Loading Paper in Post Inserter of Folding Unit FD-503, rear guide plate
View all Konica Minolta bizhub PRO C1060L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
4.1 Loading Paper ( Load the remaining paper into the tray, then press the rear guide plate against the paper. NOTICE Be careful not to load paper above the , mark that indicates the height limit on the side guide plate. Otherwise, a paper jam may occur. To load paper with the paper width less than 182 mm / 7.165", use the small size guides (support guides) built in the side guide plates. For information about how to use the small size guides (support guides), refer to the HTML User's Guide. Be sure that the rear guide plate is securely pressed against the paper. If there is any gap between the rear guide plate and the paper, this machine will not be able to detect the correct paper size. It may cause a paper feeder machine trouble. Load paper with the print side facing up. ) Close the tray. Push the tray in until it locks into place. The amount indicator changes from to CHINE] or [COPY] screen. in the tray information display area of the [MA- NOTICE Carefully close the tray. Otherwise, the machine may be subjected to an unexpected impact due to the tray or paper weight, which may lead to a machine error. Loading Paper in Post Inserter of Folding Unit FD-503 Select [Paper Setting] on the [MACHINE] screen or the [COPY] screen, then change the paper setting of the upper tray or lower tray of the post inserter. " Load paper into the upper tray or lower tray of the post inserter. The Amount indicator changes from to [MACHINE] screen or the [COPY] screen. on the # Press the tray guide plates against the paper. NOTICE Do not load more than 500 sheets (80 g/m2/ 21 lb Bond) for each of the upper and lower trays. Also, do not load above the limit line indicated on the tray guide plates. 4-4