Kyocera Ai3010 Printing System H Operation Guide - Page 11

After setting the NIC's IP parameters, connect to the NIC with the browser by typing http://, (e.g., http://192.42.211.5). At the NIC Home Page, click on NIC Configuration and follow the MAP configuration instructions (beginning with step 3) in the NetWare 4.x Directory Services Configuration section in this guide (the settings other than NetWare Print Server Name do not need to be entered). IPX Protocol Installation The IPX Protocol is required for peer-to-peer printing. IPX is not installed by default when Windows 95/98 is first installed, but it can be easily added by using the following procedure. 1. Click on the Windows 95/98 Start button and select Settings, Control Panel, Network. 2. Check to see if IPX/SPX-compatible protocol is displayed on the list of network components. If it is on the list, IPX is already installed. Please continue with the next section. If it is NOT on the list, click on Add. 3. Double click on Protocol, click on Microsoft, and double click on IPX/ SPX-compatible Protocol. Windows 95/98 will prompt for the required Windows disks to install the IPX protocol. 4. Once the files are copied, click on OK to close the network control panel. Windows 95/98 will prompt to restart the system. The IPX protocol will not be active until the system is restarted. Peer-to-Peer Printing Software Installation The peer-to-peer printing software should be installed on each Windows 95/98 or Windows NT 4.0 PC that will use peer to peer printing services. 1. Install and Run the Peer-to-Peer Software. • Insert the disk included. • Click on the Windows 95/98 Start button and select Run. • For IPX: Type :\IPX-P2P\SETUP.EXE and click OK. • For IP: Type :\IP-P2P\SETUP.EXE and click OK. 11