Kyocera Ai3010 Printing System H Operation Guide - Page 8

MAP Configuration The Management Access Program (MAP) is a Windows program with a browser interface allowing configuration and management of the Network interface Cards on IPX networks. 1. Install and Run MAP • Insert the CD-ROM included with your print server. • In Windows 95/98 or NT 4.0, click on Start and select Run. • Type :\MAP\SETUP.EXE and click OK. • Once installed, double click on the MAP icon to start the program. 2. Select the NIC to configure. • When MAP starts, a list of all available units will be displayed by unit serial number. The unit listing will be divided by IP units (listed by IP address) and IPX units (listed as OTS Click on the NIC to be configured. 3. Password Protection. Many of the configuration options in the MAP utility are password protected. The default password is: sysadm The password is case sensitive. To change the password, select Change Password in the System column. 4. NetWare Configuration • Select Setup NetWare in the Protocols column. • Enter the Print Server Name, Preferred NDS Context, and Print Server Password (if a password was defined) exactly as they were entered in PCONSOLE. • Note: Entries in MAP are not case sensitive (except the sysadm password). Preferred File Server and Preferred NDS Tree should normally remain blank unless Bindery mode is used or if the network includes multiple NDS trees. • If not using Bindery emulation, click the Disable Bindery box. • Type the sysadm password in the appropriate box and click Accept Settings. After a few seconds the screen should report that the update was successful. Click the Back arrow icon twice to return to the NIC Configuration page. 8