Kyocera FS-6525MFP FS-6525MFP/6530MFP Printer Driver Guide - Page 10
Custom Installation, Installing in Custom Mode with a Network Connection using Discover, Discover - kx driver
View all Kyocera FS-6525MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Installation Show Quick Print Tab This selection lets you define basic print options into group profiles that can be accessed easily. The Show Quick Print tab option also appears in the Administrator Settings in Device Settings. Device Settings Select the Device Settings check box to open Device Settings where you can choose installed options for your printing system. (The Device Settings check box appears only in Windows XP with a network connection.) When the installation completes successfully, click Finish to exit the installation wizard. A message may appear if there is a software installation failure. Click Finish, and retry the installation. If the same message appears again, contact your system administrator. The installation of the printer is now complete. If prompted, restart your computer. Custom Installation Custom Mode applies to driver installation for a USB or network connection. The installation wizard can discover printers that are turned on, and connected by USB and network cable, or you can manually select the driver from drivers that are available. You can specify the printer port, fonts, and the utilities you want to install. Printer drivers that ship with Windows operating systems are called minidrivers. The minidriver is available separately for PCL and KPDL and provides basic support for your printer. The KX XPS driver is only available for printing systems used with Windows 7, Windows Vista, or Windows Server 2008. The XPS driver is discussed in the Device Settings chapter. Minidriver functionality is not documented in this user guide. Installing in Custom Mode with a Network Connection using Discover This section describes the custom installation procedure of the driver software in Windows operating systems using a network connection. 1 Ensure that your printer and computer are connected to a network. 2 On the Installation Method page, select Custom Mode. 3 The Discover Printing System page opens searching for your printing system. The Discover button is automatically selected. A list of models appears. Click Next. If Discover does not find your printing system, a message appears. Remove and reinsert the network cable, and ensure it is connected properly. Click Refresh to retry the discovery. If the system still cannot find your printing system, contact your system administrator. 4 On the Custom Installation page, select the driver and software packages you want to install from the Driver and Utility tabs, and clear those not intended for installation. Click Next. 1-4 User Guide