Kyocera FS-6525MFP FS-6525MFP/6530MFP Printer Driver Guide - Page 11
Installing in Custom Mode with a USB Connection using Discover, Show Quick Print Tab - driver windows xp
View all Kyocera FS-6525MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Printer Driver Installation If you only select software packages from the Utility tab, you will skip to the Confirm Settings page. 5 On the Printer Settings page, you can assign a name for your printing system. You can also choose to share this printer with others or set this printer as the default printer. Make your selections, and then click Next. 6 On the Confirm Settings page, click Install if the settings are correct. Click Back to correct the settings. Note: If the Hardware Installation warning dialog box appears, click Continue. 7 The Installation Completed page appears displaying the following driver options. Print a test page This selection verifies a connection with the printer and creates a print out of the installed driver components. Enable Status Monitor The Status Monitor displays system status messages on your computer screen during printing tasks. The Status Monitor button appears on the Advanced tab. Show Quick Print Tab This selection lets you define basic print options into group profiles that can be accessed easily. The Show Quick Print tab option also appears in the Administrator Settings in Device Settings. Device Settings Select the Device Settings check box to open Device Settings where you can choose installed options for your printing system. (The Device Settings check box appears only in Windows XP.) When the installation completes successfully, click Finish to exit the installation wizard. A message may appear if there is a software installation failure. Click Finish, and retry the installation. If the same message appears again, contact your system administrator. The installation of the printer is now complete. If prompted, restart your computer. Installing in Custom Mode with a USB Connection using Discover This section describes the custom installation procedure of the driver software in Windows operating systems using a USB connection. With Discover, all devices available for the driver installation are found automatically. This is the recommended Custom Mode USB installation method. 1 Ensure that your printer and computer are turned on and connected using a USB cable. Note: In Windows 7 and Windows Vista, a driver installation will be made from the Microsoft Windows Update site if a certified driver is available and the system is connected to the web. We recommend you continue with the steps to install the KX Driver for an expanded feature set. 1-5