Kyocera FS-C5100DN FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7
Kyocera FS-C5100DN Manual
UPC - 632983010280
View all Kyocera FS-C5100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Kyocera FS-C5100DN manual content summary:
- Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 1
KX Driver User Guide - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 2
same operations are used for Microsoft Windows Vista, Windows Server 2008, and Windows 2000 environments. Models supported by the KX printer driver FS-C5100DN FS-C5200DN FS-C5300DN User Interface screen captures shown in this guide may differ based upon your printing system. Copyright © 2008 KYOCERA - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 3
Accounting 2-5 SNMP 2-6 Color Page Count 2-7 Monochrome Mode 2-7 Administrator Password 2-7 User Settings 2-8 Identification 2-8 Units 2-8 Language Preference 2-8 Page Description Language (PDL 2-9 PDL Settings 2-9 Windows Vista KX XPS Driver 2-11 Compatibility Settings 2-11 About 2-12 - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 4
Printing on Paper of Non-Standard Sizes 3-4 Custom Paper Sizes 3-4 Duplex Printing 3-5 Print on Both Sides 3-5 Collate 3-6 Chapter 4 Layout Booklet 5-5 Optimization 5-5 CIE optimization 5-5 Color Mode 5-6 Printer Profile 5-6 Printer profile - Advanced 5-7 Color Adjustment 5-7 HSL (Hue, - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 5
Proof and Hold 7-3 Private Print 7-4 Job Storage 7-5 Job Name 7-5 Chapter 8 Advanced Prologue/Epilogue 8-1 Select Prologue/Epilogue File to Insert 8-2 Add 8-2 Edit 8-2 Delete 8-2 Insertion Point 8-3 Watermark 8-4 Select Watermark 8-4 Page Selection 8-4 Add Watermark 8-5 Additional - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 6
: During any point in the installation process, if the Windows Security warning dialog box appears, click Install this driver software anyway. 6 The Software Installation Wizard appears. Click Next. 5 The installation differs depending on your operating system and connection method. Select your - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 7
Upgrade Driver Components on Windows Vista Installation Note: KPrint installs a client port monitor that provides Windows TCP/IP printing to any network card connected to Kyocera printing systems. KPrint supports LPR and IPP printing. For the KPrint Installation instructions, refer to your CD. - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 8
choose to share this printer with others or set this printer as the default printer. Make your selection mode you can specify the printer port and choose which software packages to install. For information, see Windows Vista KX XPS Driver on page 2-11. Windows XP - USB 1 Ensure that your printer - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 9
appears again, contact your system administrator. The installation of the printer is now complete. If prompted, restart your system. Windows XP - Network Connection 1 On the Installation Method page, select Custom Mode > Driver. If you also want to install fonts, select Utilities. 1 2 On - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 10
Windows Vista - USB 1 Ensure that your printing system is connected using a Universal Serial Bus (USB) cable. 1 2 On the Custom Installation page, ensure that the KX Driver to manually select your printing system and port by selecting Custom select, and then clicking Next. 4 On the Printer Port - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 11
this printer as the default printer. Make your selections, and then click Next. 8 9 On the Confirm Settings page, click Install if the settings are correct. Click the back arrow to correct the settings. 9 10 The Installation Completed page appears showing the installation details. User Guide - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 12
This section describes how to install a printer driver using the Add Printer Wizard in Windows XP or Windows 2000. 1 Click Start in the Windows taskbar, and click Printers and Faxes to open the Printers and Faxes window. 1 2 Click Add printer in the window area on the left. 2 1-7 KX Driver - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 13
at the top of the Printers window, click Add a printer. 2 3 The Add Printer Wizard appears. The wizard provides you with step-by-step driver installation instructions. Click either Add a local printer or Add a network, wireless or Bluetooth printer. Follow the instructions on each page and then - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 14
so the associated features can be used with the printer driver. You can also match the memory setting in the driver with the memory installed in your printing system, which lets the driver manage font downloads more efficiently. Administrator, user, page description language, and compatibility - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 15
such as input devices, output devices, and hard disk size. Then it updates the Device options list in the Device Settings tab. Auto Configure keeps the printer driver's Device Settings consistent with the actual printing system devices. This is a manual process and can be run at any time. Note - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 16
for auto configuration without manual intervention. When selected, it polls for printer configuration changes after time intervals (default is 10 minutes). When a change is detected in the printing system's configuration, the driver's information is automatically updated so that 2-3 KX Driver - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 17
functional when it is enabled in the printer. 2 Specify the RAM disk size. The maximum RAM disk capacity may vary depending on the amount of memory installed. Matching the memory setting in the driver with the memory installed in the printing system allows font downloads to be better managed by the - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 18
at the printing system and stored in the printer driver. For complete information about the job accounting features of the printing system, please see the Operation Guide for your particular model. Job accounting includes the following options: Use specific account ID: This option can be used to - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 19
printer driver. SNMP Simple Network Management Protocol (SNMP) is the Internet standard protocol for monitoring and collecting data on network devices, like printers, to ensure they are operating a User name up to 32 characters and a Password between 8-32 characters. You can select the Settings - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 20
a monochrome page. Monochrome Mode Monochrome mode disables all color settings in the driver's Imaging tab and prints with black toner only. To use monochrome mode in the Device Settings tab, click Administrator > Monochrome mode. Administrator Password You can set a password for the Administrator - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 21
in the Department text box. 3 Click OK. Units The unit of measurement is used for the following settings: • Custom Page Sizes setting in the Page Sizes section in the Basic tab • Spacing setting in the Watermark Add and Edit dialog boxes in the Advanced tab • Poster settings in the Layout tab In - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 22
Language XL), PCL 5c, KPDL (an emulation of PostScript printing), or PDF (Portable Document Format). The default is PCL XL. When using the Windows Vista KX XPS driver, XPS (XML Paper Specification) is the only PDL selection. After you select a PDL, the selection appears in the lower corner of - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 23
available. The XML Paper Specification (XPS), is a specification for a page description language and a fixed-document format. Select XPS to print jobs using the Windows Vista KX XPS driver. See Windows Vista KX XPS Driver for more information. In GDI compatible mode, vector graphics are rasterized - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 24
with an XPS environment, therefore an Windows Vista KX XPS driver supports one PDL setting XPS. You can add the Windows Vista KX XPS driver from the Product Library CD. On the Installation Method page, select Custom Mode > KX XPS DRIVER. GDI Compatible Mode, PDF, CIE Optimization, and Fonts are - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 25
all the parameters to the default by clicking Reset. 2 The other options in the Compatibility Settings dialog box include: 3 • Ignore application collation Use this option to bypass the Collate setting in the application, and give priority to the printer driver setting. • Combine source and - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 26
driver information: • Module • Description • Version Removing a Plug-in feature You can remove an installed plug-in from the driver the driver interface. 4 1 Open the Printers folder. 5 2 Right-click the desired printer icon the lower right corner of the window during printing. To access Status - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 27
information about printing system activity and the printer port. A Status monitor can be started for each supported printing system, so more than one Status the Preferences dialog box. • Kyocera Online Click Kyocera Online to open a Web browser to the Kyocera Mita corporation home page at www. - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 28
Printer Properties Use the settings in the Sound for a Status Monitor alert. 19 • Cover open • Paper jam • Add paper • Sleep • Add toner • Toner low • Not connected • Printing • Printing completed Sound You can use a sound file (.wav) of your and play it back in a spoken voice. 2-15 KX Driver - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 29
Appearance Use the settings in the Appearance tab to change the size, placement and transparency of the Status monitor image. 1 Select Enlarge window to double the size of the Status monitor image and text balloons. 1 2 to close the dialog box without saving any settings. 4 User Guide 2-16 - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 30
below. You can select the printing paper size and output destination. Basic Printing 1 Insert the proper paper size into the printing system's paper cassette or Options, and for default tray select Use printer settings. 4 Click Properties to open the Properties dialog box. 3-1 5 KX Driver - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 31
image is adjusted to match the size you select. If you would like to manually input the Scaling percentage, see Scaling on page 4-4. 1 In the Properties dialog box, from the Basic tab, click Page Sizes. 1 2 In the Page Sizes list, select the document's paper size and click OK. 2 User Guide 3-2 - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 32
must be printed using the MP tray, and labels and envelopes require the MP tray or an optional Multipurpose feeder. Ensure the paper is properly loaded by following the instructions outlined in the printing system's Operation Guide. Note: Source and Media type are separate items in the - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 33
Properties dialog box. Custom Paper Sizes 1 Load the custom paper into the printing system. For more information, see the printing system's Operation Guide. 1 2 Click Start in the Windows taskbar and then select Printers and Faxes. The Printers and Faxes window appears. 2 3 Right-click the - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 34
size. 3 4 Click OK to return to the Print dialog box. 4 5 Click OK to start printing. 5 Duplex Printing This section describes how to enable the duplex printing option. For more information, see the printing system's Operation Guide box. 3 4 Click OK to start printing. 4 3-5 KX Driver - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 35
sets of a three page document, the default page ordering would be 1, 1, 2, 2, 3, 3. The driver graphics image displays the grouping of collating and non-collating. The printer driver automatically overrides the application's collate setting and uses the printer driver setting. To use the Basic - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 36
paper. You can then fold and bind the booklet in the center. Booklet printing can be used with Cover mode to add a cover to the booklet. For more information, see Printing with Covers on page 6-1. Left Edge language: • Select Left edge binding for languages that read left to right. 4-1 KX Driver - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 37
open Print Properties. 1 2 Click the Layout tab. 2 3 Select Multiple pages per sheet. 3 4 In the Pages per sheet list, select the number of source pages. 4 User Guide 4-2 - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 38
a larger size than the paper supported for the printing system. The Poster feature allows you to increase the print size, print unit, see to User Settings on page 2-8. Print Format If you are new to poster printing, you may want to print a proof sheet, in addition to the poster, to guide KX Driver - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 39
and 1.20 inches (0.0 and 30.4 mm). This option reduces the final poster size slightly. • Print crop marks Select this option to print a border at the on the page size and print size specified in the Basic tab, you can increase the top or left margin, before printing. User Guide Click Gutter to - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 40
box if the printed data extends beyond the edge of the paper when changing the gutter setting. The size of the printed data is decreased slightly to fit in the printable margins of the page. • If the to fit check box. If you want to change the page size, see Print Sizes on page 3-2. 4-5 KX Driver - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 41
included in the Imaging tab: • Print Quality • EcoPrint • Gloss Mode • Trapping • Fonts • Graphics • Color Mode • Printer Profile • Color Adjustment • Grayscale Adjustment • Grayscale Settings Print Quality 1 at a 600 dpi printing resolution. Lets you choose a setting for EcoPrint. User Guide 5-1 - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 42
minor problems with alignment are not noticeable. To print a document with Trapping, select one of following options: Trapping Option Off Light Medium Heavy Very Heavy Pixel Width of Printing Overlap 0 0.5 1 1.5 2 Note: Trapping is not available when PDL Settings is set to PCL 5c or PDF. 5-2 KX - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 43
Font Settings feature for managing font handling is not available for the Windows Vista KX XPS driver. 1 Click Fonts to open the Font Settings dialog box. 5 font. This value becomes the default when PDL is KPDL. Note: GDI compatible mode does not support Substitute with Device Fonts. For - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 44
these applications. Device fonts are normally visible in application font lists as printer icons next to the font name, unless there are equivalent system fonts options. Note: Some options are available only when a specific PDL is selected. For more information about changing the page description language, - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 45
Guide Imaging Pattern Scaling Adjust the pattern scaling to improve visual compatibility between screen and print output. If printed patterns and fills do not match the appearance of that on the screen, use this feature to select a different print density. Pattern Scaling Option Auto (default size - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 46
color saturation of graphics and photos. Mode suited for a mix of graphics and/or photos. Select this mode to print close to the color shade of the screen. Mode suited for printing figures or graphics drawn with lines. Select this mode to print colored lines with pure simple color. 5-6 KX Driver - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 47
Printer profile - Advanced 1 From Printer profile, select Advanced. A Color Correction dialog box appears with the following options: 1 • None (application corrected) Processes the color data without applying the adjustments contained in the printing system's internal color look-up tables. Ink - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 48
1 Ensure Color (CMYK) is selected in Color mode. 1 2 In the Adjustment list, select Custom the right or left to increase or decrease the value between -180 and +180. For specific hue adjustment, select Red, Yellow, Green, Cyan, Blue, or Magenta from the Modify for Hue Adjustment. 5-8 KX Driver - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 49
also type values in the boxes. 3 4 If you want to return all HSL settings to zero, click Reset. 4 5 Click OK to save the new HSL settings. 5 RGB 1 Under Select color space, select . 1 Ensure Monochrome is selected in Color mode. 1 2 From Adjustment, select Custom. 2 User Guide 5-9 - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 50
is the default mid-level printer for color print jobs, which can provide faster printing. It is also useful for increasing the detail for light colored text printed by monochrome printers. White text and image colors are unaffected. This option is unavailable in this printer model. 5-10 KX Driver - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 51
mode, Page insert, and Transparency interleaving features of the printer driver. These features are available in the Publishing tab: • Printing with Covers • Page Insert • Transparency Interleaving Note: The Publishing tab is unavailable for the Windows Vista KX XPS driver Cover mode and Page - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 52
Properties. 1 2 In the Properties dialog box, click the Publishing tab. 2 3 Select the Cover mode check box. Select from the page arrangements described in the table below. 3 Cover Printing Options Check Box on the outside and inside surfaces of the front cover. Front cover 6-2 KX Driver - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 53
and back 5Back inside Front cover Prints on the inside surface of the back cover and inserts a blank front cover. Back cover Front cover User Guide 6-3 - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 54
can insert a preprinted page or a page of a different paper type before a designated page. You can also print on the inserted paper. Using the standard duplex unit, you can also print on the back of the inserted paper. 6-4 KX Driver - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 55
Publishing Although the Page insert and Cover mode may be used simultaneously, they cannot be combined with Transparency interleaving (described in Transparency Interleaving on page 6-6). onto back Inserted page Prints on the inside surface of the inserted page. Inserted page User Guide 6-5 - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 56
. On these inserted pages you can print the same content as for the transparencies. Transparency interleaving cannot be used together with Cover mode or Page insert. Transparency Interleaving Method 1 In your application, select Print from the File menu and open Print Properties. 1 2 If the Source - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 57
and if necessary, load backing paper into the selected cassette. 7 7 Click OK to return to the Print dialog box. 8 8 Click OK to begin printing. 9 User Guide 6-7 - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 58
(PDL) on page 2-9. Printer Driver Menu Options Quick Copy Function Job Deletion Access after Printing Code Prints all copies of a Saved operation panel. Panel Message (Location) Menu> Job Box > Quick Copy Default number of copies printed Same as the original job (adjustable) 7-1 KX Driver - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 59
Printer Driver Menu Options Proof and Hold Private Print Job Storage Function Job Deletion Access after Printing Code When you print multiple copies, the printing system produces one copy for proofing and pauses. You can resume printing the remaining copies from the printing system's operation - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 60
and Hold 1 Open the Job tab as indicated in the instructions for Quick Copy on page 7-2. Select Proof and hold. 1 2 Name the job for future reference when printing from the printing system's operation panel. For more information, see Job Name on page 7-5. 2 3 Click OK. 3 7-3 KX Driver - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 61
operation panel to proceed. When using the Proof and hold manually, use the same key sequences as explained in Delete Quick Copy Jobs on page 7-3. Private Print Private print jobs are saved to the hard disk for printing until a four-digit access code following the instructions in Identification - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 62
code check box and type in the desired four-digit access code. When you want to print the saved jobs, type in the access code on the printing system's operation them manually, follow the same steps as for Delete Quick Copy Jobs on page 7-3. When deleting jobs, you must type in the same access code - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 63
in printing system memory, if a job with the same User name and Job name exists. Or select the Use job name + date and time (default setting) to add date and time to the end of the Job name, in the format "mmddyy hhmmss." Note: Because the operation panel display of - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 64
box containing options for that feature. These features are available in the Advanced tab: • Prologue/Epilogue • Watermark • EMF Spooling Note: Watermark is the only feature available using the Windows Vista KX XPS driver. For more information, see Watermark on page 8-4. Prologue/Epilogue Prologue - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 65
Advanced specific task), settings for printing system emulation, an electronic form, or a graphic object such as a logo or signature. User Guide You can add or delete command file names in the list, or select a file to edit. • To insert a command file into the print job and - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 66
Advanced Insertion Point Each file The command file is inserted into all even-numbered pages. • Pages To insert the command file into specific pages, type individual page numbers separated by commas in the text box, or a page range separated you are prompted to specify page numbers. 8-3 KX Driver - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 67
Advanced Watermark Use the Watermark feature to create the document except the first page. • Only on specified pages To print the watermark only on specific pages, type individual page numbers separated by commas in the text box, or a page range separated to specify page numbers. User Guide 8-4 - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 68
Advanced • Print onto front outside cover Select Print onto front outside cover to print the watermark on a separate front cover page before the document prints. This option is enabled when Cover mode is selected in the Publishing tab. If Cover mode , sizes, , color, and size. In the Count unit - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 69
cursor anywhere in the preview area. Click and hold as you move the mouse, adjusting the watermark image as you want it to appear on the printed page. 10 The following options provide additional means for positioning watermark text: 11 Centered [default]: Places the center of the watermark text - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 70
Advanced 8-7 User defined: Select to change the angle from the default value. Type the number value appears in the Lum and RGB text boxes. 4 5 You can also create a specific color by typing numbers in the Hue, Sat, Lum or RGB text boxes. 5 6 refuse the deletion, click No. 14 KX Driver - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 71
Advanced EMF Spooling When printing large documents, it can be beneficial to select EMF spooling. This delays spooling and returns the user to their dialog box and Allow data passthrough is selected in the KPDL Settings dialog box. See Page Description Language (PDL) on page 2-9. User Guide 8-8 - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 72
accessed from Printing Preferences. Profile lets you save printer driver settings as a profile. You can select maximum of 26 profiles can be established in one driver, including the Factory Default profile. Device Settings cannot be saved to a to open the Add Profile dialog box. 2 9-1 KX Driver - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 73
activate the selected profile to the current print job. 5 Note: To reset the printer driver to default settings, select the Factory Default profile and click Apply. This clears the settings of a selected profile. the Name, Icon, or Description.3 4 Click OK to save the profile. 4 User Guide 9-2 - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 74
3 Importing and Exporting a Profile You can export and save a profile on your computer and transfer it to other computers, then use it with other printing systems. Multiple profiles can be exported Export. 2 3 The Export Profile dialog box appears. Name and save the profile. 3 9-3 KX Driver - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 75
operation panel to print a Private print job. An access code can also be used with the Job storage feature. Auto Configure Device settings feature that queries a printing system through the network and automatically retrieves settings for optional devices, and memory. Driver settings are updated - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 76
copies on Hard disk. After the first copy has been reviewed, the remaining copies can be printed or deleted at the printing system's operation panel. Proof and hold jobs are stored temporarily and are deleted when the printing system is reset or powered off. Q Quick copy Job feature that prints - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 77
W Watermark Advanced feature that lets you add semitransparent text to a document. User Guide Glossary - 3 - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 78
2-4 Document image, sizing 3-2 Document portability 5-5 Duplex Printing 3-5 E EcoPrint 5-3 F Fast printing 5-5 Firewall 2-3 Font Substitution 5-4 Fonts 5-3 native download 5-3 G GDI compatible mode 2-10 Gloss mode 5-2 Graphic Settings 5-4 Grayscale 5-9 Gutter 4-4 - 4-5 H HSL 5-8 Hue 5-8 KX Driver - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 79
borders 4-3 Print Quality 5-1 Printer default settings 2-1 Printer Profile 5-6 Color Correction 5-7 Printer Properties accessing 2-1 Printing basic tasks 3-1 covers 6-2 duplex 3-5 on paper of non-standard sizes 3-4 remaining copies of proof and hold jobs 7-4 with Custom Paper Sizes 3-5 Private Print - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 80
administrator 2-5 Administrator password 2-7 compatibility 2-11 Unit of Measurement 2-8 USB 1-2 User Settings 2-8 Identification 2-8 language preference 2-8 measurement 2-8 V Version 2-12 Vista 1-2, 1-6 W Watermark custom colors 8-7 Windows Vista 1-2, 1-6 Windows XP 1-2 - 1-3 Index - 3 KX Driver - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 81
75038-5299 Telephone: (972) 550-8987 Fax: (972) 252-9786 National Operation Center & National Training Center: 2825 West Story Road Irving, Texas 75038-5299 Telephone (305) 421-6640 Fax: (305) 421-6666 KYOCERA MITA CANADA, LTD. 6120 Kestrel Road, Mississauga, Ontario L5T 1S8, Canada Telephone: (905) 670 - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 82
Oppsal, NO 0619 Oslo Olaf Helsetsvei 6, NO 0694 Oslo, Norway Telephone: +47.22.62.73.00 Kyocera Mita Danmark A/S Ejby Industrivej 1, DK-2600 Glostrup Denmark Telephone: +45.5687.1100 Kyocera Mita Portugal, IDA. Rua do Centro Cultural, 41 (Alvalade) 1700-106 Lisbon, Portugal Telephone: +351.21.842 - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 83
-ku Osaka 540-8585, Japan Telephone: (06) 6764-3555 http://www.kyoceramita.com Kyocera Mita Singapore PTE, LTD. 121 Genting Lane, 3rd Level Singapore 349572 Telephone: 67418733 Kyocera Mita Hong Kong, LTD. 11/F., Mita Centre 552-566, Castle Peak Road Tsuen Wan, New Territories, Hong Kong Telephone - Kyocera FS-C5100DN | FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 84
Version 7.7_2008.08.26
KX Driver
User Guide