Kyocera FS-C5100DN FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 32

Printing Basics 3 In the Basic tab, click the Print Size list and select the preferred output paper size.3 4 Confirm the proper paper size is loaded. Click OK to return to the Print dialog box. 4 5 Click OK to start printing. 5 The source document is automatically scaled to fit the output paper size. Media Types The printing system automatically selects the paper size specified in the Page Sizes setting in the Basic tab by default when you are printing on regular paper. However, the printing system supports a wide variety of printing media. You can specify the media type in the Media type setting for auto media selection when using non-standard types of printing media, such as recycled paper, labels, or transparencies. You can also specify the finishing settings for best results. Transparencies must be printed using the MP tray, and labels and envelopes require the MP tray or an optional Multipurpose feeder. Ensure the paper is properly loaded by following the instructions outlined in the printing system's Operation Guide. Note: Source and Media type are separate items in the dialog box, but can be combined using the Combine source and media type lists setting in Compatibility Settings. If they are combined, Media type is not available on the Basic tab. To change this setting, open Device settings > Compatibility Settings and clear the Combine source and media type lists selection. When paper is properly loaded in the paper cassette, the printing system can automatically detect the paper size. The following steps specify the media settings. 3-3 KX Driver