Kyocera KM-C2230 KM-C2230 Standard PCL Print Controller Users Guide - Page 188
Store to HDD
View all Kyocera KM-C2230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 188 highlights
Job Management 11 11.1.3 Store to HDD If "Store to HDD" is specified and a job is printed, the job is saved on this machine's hard disk. The job is not printed until it is recalled to the memory from the hard disk using this machine's control panel, and its storage is cancelled after it is changed to a "Job Stored" job. The data held on the hard disk is not cleared, even if this machine is turned off. ✎ Note To use the "Store to HDD" setting, an optional hard disk must be installed in this machine. Setting the printer driver 1 In the printer driver setup dialog box, click the "Job Management" tab. 2 Select "Store to HDD" from the Store Job drop-down list. Operations on this machine 1 From the control panel, touch [Job Control], then [HDD] to display the list of jobs stored on the hard disk. 2 From the job list, select the job that you wish to recall from the hard disk to the memory, and then touch [Open Job]. The job is recalled to the memory, and its status is set to "Job Stored". 3 From the control panel, touch [Job Control], then [Hold Job] to display the stored job. 4 Select the job you wish to print, and then touch [OK]. The job status changes to "Waiting Print", and the job is queued to be printed. For details, refer to the User's Manual of this machine. You can check the status of the job from the Job Log screen. 11-3