Kyocera KM-C3232E DF-710/MT-710/BF-710/PH-5A Operation Guide Rev-1 - Page 14

English 5 Copies will be stapled and ejected onto Tray A, face down. If Tray A reaches its maximum capacity, a message displays. Remove all copies from Tray A to continue. NOTE: The maximum number of copies that can be stored on Tray A differs depending on the size of copy paper being used. For further information refer to page 36. 6 On completion of the job, remove the copies. Booklet Stitching Mode In this mode, copies are stapled in two positions in the center of the paper. The following paper sizes can be used in Booklet Stitching mode: • A3, B4, A4R, 11 × 17", 8 1/2 × 14" and 8 1/2 × 11" Stapling Capacity: 2 to 16 sheets at a time. NOTE: The optional Center-Folding Unit is required for automatic folding. Only the folding tray is used for Booklet Stitching mode. Booklet Feature (Sheet originals): Delivers booklet of two-sided copies with facing pages from one-sided or two-sided originals. Booklets such as magazines can be created by folding at the center. Booklet Feature (Facing originals): Copies book originals to booklets consisting of two-sided copies with facing pages. Booklets such as magazines can be created by folding at the center. 1 Select the Booklet Stitching mode on the operation panel of the machine. NOTE: Refer to the Operation Guide for the machine for more detailed information. 2 Load the originals in the Document Processor, or one at a time on the Platen. NOTE: Refer to the Operation Guide for the machine for Document Processor and Platen specifications. 12 DF-710, MT-710, BF-710, PH-5A, PH-5B AND PH-5C OPERATION GUIDE